Fishfinder review Garmin Striker Plus 5cv: instructions and specifications

The Garmin Striker 5CV Plus echo sounder consists of two main parts: a sonar and a display device. The first is connected with a cable to the display. The sonar is attached to a boat and immersed in water. It emits signals into the water and receives their reflection. It can operate in several modes – normal and high-precision.
There are several display methods – one graph, two or three graphs at the same time, and a pie chart. The device has a large number of settings that make it possible to organize the operation of the echo sounder in the desired way. When you re-fish in the same reservoir, you can not collect all the data again, but pick it up from the record on the chartplotter.

Instrument complete set

The packing box contains the Garmin Striker 5CV Plus echo sounder. The kit includes fasteners in the form of a bracket, which is equipped with a swivel heel. Two special screws are provided to fix the device. The power cable has a 4-pin connector. The sensor works using two beams. The sensor is provided with fasteners that use plastic clamps. Additionally, there is a set of various fasteners. The transducer can also be attached to the transom. The special fixing structure is fixed with special bolts. The kit also includes a mounting card, operating instructions printed in English and Russian. The kit includes a warranty card.

Initial setup

After the first start-up, the user is presented with a choice of language for the interface. This is done in a compact table where you need to select the appropriate value. The movement of the pointer is carried out using the arrow keys. After pressing the enter button, which is located next to them, the desired language will be set.
Next, you need to select a 12 or 24 hour time format, and also specify your time zone. After that, the user will have to set the exact time. After that, the initial setup will be completed, and the main menu will become available to the user.
Main menu of fishfinder gps sonar [/ caption]

Description of the main functions of the fishfinder Garmin Striker 5CV Plus

They correspond to the items of the main menu, which are available at startup. The echo sounder has the following features.

Normal operation

The standard display of the results of the echo sounder operation is carried out after clicking the “Traditional” item. In this case, a color picture appears on the right, graphically displaying the examination results. As you move, its edge shifts to the left. On the left side of the screen, digital readings are displayed. The survey is carried out using two beams with different frequencies – 77 and 200 kHz. The bottom is shown clearly and clearly, but there is also noise in the image.
The left shows the depth from surface to bottom at the location where the sounder is operating. The water temperature is displayed below it. The current time is shown below. Along the right edge of the diagram there is a depth scale from which the fisherman can visually determine the required depth.

Clear View operating mode

By going to this section of the main menu, the user gets the opportunity to use the high definition mode, also known as structured scanning.
Its main difference from the previous one is the use of significantly higher frequencies. To survey the bottom, two beams with frequencies of 455 and 800 kHz are used. This mode allows you to examine the bottom in detail and determine its features. For example, in the picture, you can determine the presence of snags on it. The image quality is so great that it can be called realistic. This is a powerful tool for studying bottom features. The fisherman can thus determine the places of the most likely accumulation of fish. The presence of such a mode of operation is one of the differences between the echo sounder and the younger versions.

Flasher in sonar garmin striker plus 5cv

A feature of this mode is the display of data on the screen in the form of a pie chart. Numerical indicators are located in each corner of the screen: depth, water temperature, time and voltage in the device.
The pie chart is structured as follows. Depth is measured in a clockwise circle starting from the vertical position. Its maximum value on the graph is 12 meters. The yellow area corresponds to the soil layer. The white bar fills the depth from 0 to the bottom. It is interesting to note that the diagram will clearly show the bait and the fish suitable for it. Thus, you can control the fishing process. However, in places where depth changes rapidly, the picture may not be clear enough. This can create discomfort when fishing from a boat. In most cases, this display method is used when fishing on the spot, as well as during winter fishing.

Frequency division mode

When you start it, you will see a screen that is divided into two equal parts.
The screen can be split vertically or horizontally, whichever is more convenient for the user. The peculiarity of this mode is that in each part you can set different settings. As a result, the fisherman has access to simultaneous observation of the situation in two different viewing modes. One of the popular options is to survey the bottom with different rays. Moreover, one of them is narrow, but capable of working at greater depth. The other has a wide reach, but is designed for shallower depth. The combination of different observation methods will allow for a more accurate analysis of the situation under water.

Combined mode

The next item in the main menu is the Traditional + Clear View mode. In this case, the screen is divided in half, allowing the user to see simultaneously what is happening in the water column in both ways.
Here, one half uses the traditional approach, the other uses structural scanning.

Map

When exploring the bottom, you can conduct a detailed survey each time, or you can use basic navigation. Creating a contour map will allow you to fix basic information about the depths of the reservoir.
Here you can link the study to a specific point in the reservoir. If the fish finder has been used several times before, this will save the bottom survey so that the fisherman can get basic information for fishing.

Difficult complex mode

This section is called “Map + Traditional + Clear View”.
In this case, the screen is divided into three parts. A depth map will be displayed on the left. In the center, you can see the data obtained using the traditional mode. The result of the high quality scan mode will be shown on the right. In this case, you can also display instead of three only two modes, specifying the desired configuration in the settings. Download detailed instructions in Russian for the Garmin striker plus 5cv echo sounder at the link:
Garmin striker plus 5cv – manual

Remaining operating modes

When looking at the main menu, you can see that the main modes are displayed as icons. The rest are indicated at the bottom of the screen.
In the section dedicated to user data, the fisherman can store all the information he needs.
Waypoints on Garmin Strike 5 Plus [/ caption] Here we are talking primarily about the available maps and bottom survey results. Data collection can be linked to waypoints. They can be connected, or they can be linked into routes, which are called tracks in the menu. The search is suitable in cases where the fisherman has a significant amount of accumulated data. With this function, you can easily find the data you need.
The “Settings” item is designed to control the display device.
Displaying information on the screen [/ caption] If you need to go to the echo sounder settings, first open the item that provides for the traditional display, and then press the button on the device to call the menu. It can be recognized by the three horizontal lines depicted on it.
Fishfinding gps echo sounder Garmin Striker Plus 5cv – video review-review on sonar: https://youtu.be/di45iZ0gLRQ

Specifications

The device has the following characteristics:

1. The fish finder weighs 430 grams.
2. During operation, a voltage of 10-28 V is used.
3. A color display is used for display
4. The degree of protection against water is
5. Dual-frequency and dual-beam scanning is used.
6. When using a split screen, zoom is available.
7. It is possible to determine the degree of hardness of the bottom, which allows you to find out the nature of its surface.
8. The device can determine the topography of the bottom when driving at high speed.
9. A 5-inch screen is used.
10. The signal power is 500 W.

The device can be used as an echo sounder or flasher. In the latter mode, it will create a more accurate picture.

Advantages and disadvantages

The advantages of the Garmin Striker 5CV Plus echo sounder include the following:

1. Thoughtful, simple and intuitive control.
2. The presence of a large number of settings that allow you to conveniently organize the use of the device.
3. The use of the Russian-language interface is provided.
4. GPS availability.
5. The ability to remember the received data and bind them to certain points in order to use it when re-visiting the reservoir.
6. A depth of several hundred meters is available.
7. During scanning, the speed of movement is automatically determined
8. The set includes convenient holders that provide a comfortable use of the equipment.
9. The water temperature is displayed.
10. The use of several display modes, including one that ensures high accuracy of work.

The disadvantages include the relatively high cost of the device and the short length of the connecting cable. The price of the Garmin Striker 5CV Plus echo sounder for 2021 is around $ 300.

Anglers’ opinion on Sonar Garmin Stryker 5CV

I have been using the device for over six months. Works reliably and accurately. I like the display, which clearly shows what is happening under water.
Grigory Tirov

I have been using the device for 2 months. Convenient 5-inch display, accurate depth measurement. I liked that the echo sounder has low power consumption.
Sergey Anisov

Поделиться ссылкой: