Tackle killer crucian carp: what is it, installation options, how to catch

The crucian carp killer is an unsportsmanlike tackle for feeder fishing. This is a rig that is designed for long distance casting. Works great in open water at any time of the year. The tackle is heavy, and not tuned for a delicate bite due to self-chopping, due to which the crucian carp clings to the lip.
Crucian carp killer is a tackle that cannot be called sports [/ caption]

What is a crucian carp killer: general information, advantages and disadvantages

If we consider the crucian carp killer from the point of view of a sports angler, then it should be noted that this rig does not belong to sports fishing, and is installed, as a rule, on a feeder. However, you do not need to expect a sensitive bite in this case because:

• there are many hooks on the tackle;
• it is heavy and bulky.

It is difficult for a crucian to move a heavy nozzle, because the bite is practically invisible. However, this absolutely does not prevent anglers from using this rig everywhere. Tackle is made by hand, or purchased at a fishing store, or in the market. The main advantages of the rig:

1. It works great not only on crucian carp, but also on other peaceful fish . Tackle is often called carp. In addition, this method of fishing, as a rule, is based on the effect of self-hooking by the type of tackle “method”.
2. Multiple hooks allow you to expect more bites than using just one hook. In this case, the effect of the accuracy of complementary foods and baits plays a major role.
3. You can send feed to a certain point at the same time with several feeders . This way you need to make fewer casts for feeding, which scares the fish less. At the same time, you need to choose the right bait, otherwise it will quickly wash out of the feeders.

Spring feeder for the “death of a crucian” [/ caption] The disadvantages include:

1. Irrational tooling design . Mounting a crucian carp killer often requires a large number of feeders, sometimes one hook with a spring is enough. But then the tackle immediately becomes sporty (modernized) and has a high sensitivity. Only the portions of bait are reduced, which are delivered in one cast. At the same time, it makes sense to use a paternoster feeder rig, which is great for fishing in a muddy reservoir. And for rivers with strong currents, it is better to choose a “helicopter” rig.
2. High chances of tangling hooks or springs . If the tackle is made correctly with the correct distance between the springs and the leaders, this possibility is minimized.
3. The tackle is insensitive . Doesn’t give an opportunity to see delicate fish bites. The tip of the rod will show a bite only after a real serif.

That is, a crucian carp killer is a tackle designed for catching trophy specimens of crucian carp, carp, less often other fish, when the bite is powerful and differs from the light pokes of small crucians. Installation of 3 feeders allows you to quickly feed the place to attract fish, but one large spring can cope with this.
A homemade crucian carp killer on three feeders allows you to quickly feed a large area, but at the same time it is very bulky and often confused. [/ caption]

Do-it-yourself carp killer rig mounting options

We repeat once again that catching the death of crucian carp is not a sport. Most options use more than three hooks, the bite is also very hard to see at the tip of the rod and the fish is almost always self-catching. But this does not prevent fishermen from actively using the tackle in open water. How to make a crucian carp killer:

1. As a rule, the tackle is made sliding, since it is more sensitive to bites. For installation, you will need a fishing line with a diameter of 0.35-0.40 mm, a length of about 1 meter. At the end, a swivel with a carabiner is fixed and a weight of 15-60 g is installed. Then sliding feeders (1-6 pcs.) Are threaded. The distance between them is chosen in the aisles of 15-20 cm. A small leash with a hook is tied to all of them.
2. With a blind rig, several feeders are installed, which are connected with a thick fishing line so that there is a distance of about 8-12 cm between the springs. As in the sliding version, all springs must have one short leash.

Carp killer tackle can be successfully used when fishing with a float Of course, these are just a few options for using the tackle. There is also a killer of crucian carp from Mikhalych in stores, the equipment differs in the way of fastening the feeder, the presence of leashes, the installation of rocker arms or the diameter of the fishing line.
Killer crucian carp from Mikhalych [/ caption] Fishing from Mikhalych: https://youtu.be/YxssrsyQbnQ

Equipment modernization

To make fishing more sporty and efficient, you can improve your rig. Upgraded Crucian Carp Killer – DIY Instructions:

• if the springs are not shipped, then a weight is tied at the end of the line;
• a stopper is threaded 15 cm above it;
• then the fishing line is threaded through the first spring, like inline installation;
• another bead is installed so that the spring moves about 5 cm;
• install the bottom stopper for the second spring;
• we put it on, we perform the same manipulations for other springs;
• we knit leashes about 4-5 cm above all the springs.

So during the casting of the rig and the tension of the springs, the latter will move to the upper stoppers and leash units. The bite will be transmitted to the rod signaling device thanks to inline mounting. In the same way, a killer for crucians from one feeder is done: A
killer for crucians from one feeder is not so confused as on the basis of several feeds – which is a big plus on overgrown reservoirs [/ caption]

Other equipment options

Crucian death can have other types of rigs. This is a nipple, cork, pin, etc. All of them are also equipped with hooks and clogged with crucian groundbait.

Pacifier

The manufacturing steps are as follows:

• at the end of the main line, you need to install a stopper;
• after that, inline installation of the feeder is done;
• another stopper is installed at a distance of about 5 cm;
• fits a swivel with a carabiner and 3 leashes.

During the casting, the baited hooks hide in the bait.

Fishing Rig Stopper

The main stages of manufacturing:

• the cork from a large eggplant must be weighted with lead, fastening it to the bottom with wire;
• 4 holes are made on the side of the plug with the same distance;
• winding rings are installed in them;
• the main fishing line is knitted to one ring, leashes to the others.

Fishing for carp with a carp killer – video from an expert: https://youtu.be/VtADRSe0n6w

Crucian carp killer – pin

The peculiarity of the tackle is that a simple pin is used as a feeder. But there is one condition – it must be large. To make such a fishing tackle, you will need:

• one winding ring;
• large pin;
• hooks;
• load 40-60 grams.

This is the so-called foam rubber carp killer. Foam rubber is put on the hooks and stuck into the bait, which is on the pin:

Fishing features

Before fishing with tackle, you need to study the bottom of the reservoir and mark promising areas for casting the killer crucian carp – holes, windows in aquatic vegetation, open water near the wall of algae. If possible, it is worth completing the starting lure for how many days before fishing. It is best to cast in one lure place, as the fish reacts well to aromatic food. Why is it worth picking up a landmark at the other end of the shore, and to limit the cast, use a clip on the reel. Since this rig is characterized by a large mass, it is thrown gently, without any jerking. Before falling to the surface of the water, the fishing rod must be moved slightly forward. This way you can determine when the rig will fall to the bottom by loosening the line that needs to be tightened to tighten.

Important: When pulling the line, you need to make sure that the springs do not move in place. Otherwise, it is recommended to perform a reset. This will be required to prevent the feed from spilling out of the springs.

The peculiarity of the fish biting on this rig is a sharp jerk, after which the line sags. At this time, and it is worth hooking. If there are no bites, a second reset is made once every half an hour. Do-it-yourself tackle video instruction: https://youtu.be/vnjfq8JBB2E

Features of fishing, taking into account the season

All seasons differ in the peculiarities of fishing with a rig.

Fishing in the spring

At this time, it is best to choose a small-fraction groundbait. That is, you need to grind the cereal for porridge on a coffee grinder. Plant dressing with the addition of chopped worm also works well in the spring.

Attention: Experienced anglers do not recommend getting carried away when fishing in the spring by adding attractants to the bait.

Moreover, in the spring season, it is advised to add a small amount of sifted earth to the feed. It is desirable that this be the soil, which is located on the coast. In early spring, crucian carp bites inactively, therefore, intensive biting occurs only with warming, in early-mid April. Catching a crucian carp: https://youtu.be/uRf_evmCR9Y

Summer fishing

In summer, it is advisable to add attractants to the feed – garlic, vanilla, anise. In summer, fish bite most of all on vegetable bait. This season, experts recommend adding seeds, bread crumbs, semolina, oatmeal flakes to the bait. In the summer, the fish reacts perfectly to additional feeding, but you should not overfeed the crucian carp. The best biting occurs at sunrise and sunset.
Feed in feeds [/ caption]

Fishing in the fall

At this time, the fish is mainly attracted by the bait of animal origin, therefore dried daphnia, pellets, bloodworms are added to it. The death of a crucian carp is a versatile and quite catchy tackle. Active feeding with the further supply of many springs activates the bite of any fish. Sportiness is another question that everyone decides for himself.

Поделиться ссылкой: