Fishing for carp on corn: boil, plant and fish correctly

Corn is considered the most affordable, effective and best bait for carp fishing and it is undoubtedly cheaper than, say, a
tiger nut . If you do not want to cook the bait yourself, it is sold canned in every supermarket, this option, usually used for bait, is also suitable for fishing, it is relatively secure on the hook and has a suitable smell. Fishing for carp with corn allows you to cut off small things and these are not all the advantages of this bait.
Underwater – on corn kernels takes seasoned carp [/ caption] It is interesting that corn very willingly take and wild species of carp –
carp… Although the carp is undoubtedly a more active and sharp comrade and therefore often flies in the form of a trophy to spinningists.

Rod rigging

Fishing for carp for corn most often occurs on a float. This is due to the fact that when fishing with a feeder, it is better to use
boilies or
chufu . These attachments hold better on various carp mountings, and just on a hook. Therefore, the tackle does not need to be thrown as often as when fishing for corn. To properly equip a carp rod for fishing with corn, you must:

1. Coil . First of all, you need to pay attention to the spool diameter, as a rule, it is in the range of 3000-4500 according to Shimano’s classification. This will determine the amount of line wound. In the basic configuration, there should be two spools, a metal one – for braiding and a plastic one – for a fishing line.
2. Fishing rod . It is best to choose the length of the blank within 3-5 meters. A very short rod will not allow you to tire the fish, and a very large rod is inconvenient to hold when fishing for trophy specimens.
3. Hook . Basically, for carp fishing for corn and peas, hooks No. 4-8 with a small sting are installed. When fishing on the float, grains can be planted simply by passing them through the sting without “smart” installations [/ caption]
4. Fishing line . This fish is very cautious and avoids thick lines. Therefore, it must be thin and at the same time reliable, have at least 15 kg for a break. The length is about 150 meters.
5. Float . The best choice is not a heavy and sensitive pencil-shaped float.
6. Weight . Since carp fishing most often takes place in bodies of water without strong currents, a heavy weight is not required. A very weighty rig will plunge into the silt and in this case the fish will not see the bait. A load weighing 50-80 grams is quite enough.

Hair tackle making

In almost all cases, carp for corn is caught using a hair tackle, where several grains are attached. This construction has several objectives:

• the fish does not pounce on the bait, but sucks it in, therefore it does not feel the hook;
• installation allows you not to plant soft corn on a hook, from which it can fly off during a power cast.

To install a hair rig for carp fishing on corn, you will need to prepare:

1. Leash material . The main thing is that it is not twisted, has no bends and knots.
2. Hook . For corn, it is best to choose number 4-8.
3. Stoppers . Silicone stops are required to hold the corn in place so that it does not slip off the hair.
4. Boilies needle . This product has a small lock and is used for dressing corn on the hair.
5. Shrink tubing . Its main task is to align the leash with the bait so that the latter does not twist, but is located in the same position as the hook.

To make a hair montage, you first need to prepare a piece of fishing line about 20-25 cm long and tie a loop at one end. It is passed through the ring of the hook to the tip, leaving about 4-5 cm between the end of the hook and the eyelet. The size of the hair will depend directly on the bait being set.
The hair harness is allied with corn [/ caption] To prevent the leash from bending, a shrink tubing is installed. It is 4-5 mm long and is threaded onto the fore-end with a boilie needle. In doing so, you need to be careful not to deform it. The leash is also pulled through a tube. Then a hook is tied to the fishing line and the size of the bait is selected to it. Hair rig for carp fishing, as a corn attachment: https://youtu.be/CgbS6oTubOk

Making fishing corn at home

There are several ways to make corn – boil, steam, ferment, can.

Steamed grains

How to steam corn for carp fishing:

1. You need to soak dry corn in water for one day.
2. Then it is boiled for half an hour, while you can add honey or vanilla, taking into account the dosage of 200 grams per kilogram of corn. This will help improve the bait’s performance.
3. After cooking, the corn should be in the boiled syrup. This will allow the bait not to lose its taste.

Common canned corn is also often used (Bonduelle has proven itself best), which can be found in any supermarket. But it should be borne in mind that the banks often contain deformed and small grains, and this will complicate the installation of equipment.

Fermented Drunk Corn for Fishing

Before fermenting carp corn, you need to prepare a suitable container. For example, plastic containers with a tight-fitting lid are suitable for this. Drunk Corn Recipe for Fishing When Fishing for Carp and Other Carp Fish:

1. Grains are poured into buckets for a third of the total container volume.
2. Then water is added. In this case, its level above the grains should be approximately 15 cm. This is required, since the corn will begin to absorb moisture and swell.
3. After that, the containers are tightly closed so that air does not get into the buckets.
4. After 3-4 days of soaking, the corn will ferment. At the same time, you can see foam on the surface, which will float on the water surface. Fermented corn is a delicacy for carp, carp and other carp fish [/ caption]
5. After about 7-9 days, the grains will begin to smell. You can feel the pronounced aroma of alcohol, as the corn, along with the sugar, begins the fermentation process.
6. So you need to leave the grains for another week, after which the bait is ready for use. Do not forget that there are no special time limits for fermentation, it can last up to 2-3 months. Moreover, the longer this process takes place, the richer the grains acquire aroma, so the slave will be able to find this attachment at a considerable distance.

How to plant corn directly on the hook when fishing for carp [/ caption]

Choosing a place for fishing

To catch carp, you need to find the appropriate place in which this fish is found. Carp can be easily identified as they swim near the surface of the water, blowing bubbles and jumping. Interestingly, when the carp melts, they do not bite actively.
In spring you can observe fish in shallow water, where there is a sandy bottom and the water warms up the fastest. Here she tries to get rid of parasites from her body. In summer, carp often shows movement in algae and bubbles that rise during digging in search of food in the muddy bottom.
Carp parking in spring [/ caption] To find the best place for carp fishing, it is worth considering a few key points:

1. In the morning, in cool weather, the fish often walk in warm water in shallow water. Especially when the bottom of the shallows is covered with silt. Here the water is warm all the time and there is enough food.
2. It makes sense to take a closer look at the backwaters where there is no current. Driftwood near the shore creates coolness, and insects that have fallen from the trees are ideal food for fish.
3. Large individuals definitely need shelter , so they often choose a submerged snag.
4. The fish waits for a hot time at depth, waiting for twilight. Also, carps often hide in algae. Fishing in these places threatens with frequent flails, but it is in strong places that excellent results are obtained.

Fishing for carp on corn for hair editing – underwater video filming:

https://youtu.be/B-YdljLVXH4 Once the location of the carp has been found, factors affecting the behavior of the fish need to be considered. For example, a large number of fishermen may frighten off a fish and it will leave to look for another quieter place. At the same time, carp (and carp as well) have a distinctive feature – the fish goes with the current, which is created by the wind. Careful monitoring of the pond and weather conditions affecting the movement of fish will allow you to find the best fishing spot. Carp fishing for corn and peas, who will – “video battle” of two baits: https://youtu.be/9pCn2yh9ZyY

Newbie mistakes

It is not enough for novice fishermen to know how to properly hook corn on the hook, you still need to determine why the fish does not take the bait. There are a number of reasons for this:

• fish do not bite due to the large amount of natural food, which often happens in ponds in a certain season;
• the baited hair rig is very long and the fish tries the bait without being hooked;
• there are many fishermen on the shore, and since this fish perfectly distinguishes between movement in the reservoir, especially against the background of the horizon, it will leave or will simply stand without activity;
• loud noise on the shore;
• fishing in places where fish is caught very often (paysites and pressed sections of reservoirs), this causes a feeling of danger in the carp over time;
• sometimes the fish simply does not enter certain places chosen for fishing, in this case, the bottom relief must be taken into account;
• does not see the bait, since a heavy weight is installed, drowned in a muddy bottom;
• carp do not distinguish the bait because of the lack of a pronounced odor or turbidity in the water.

Fishing for carp for corn – it will be useful for beginners: https://youtu.be/vj-GV8wP_N8 Corn is the best bait for catching carp, carp, crucian carp, based on the ratio of availability / quality / catchability. But having the perfect bait available is not enough. The effectiveness of fishing will also depend on many other factors – determining the location, mounting the equipment, fishing skills. All this must be taken into account and the result will certainly show itself.

Поделиться ссылкой: