Stream Feeder – Best Rig for River Fishing

Feeder fishing in a pond with a strong current often allows even beginners to quickly fill the cage with fish and fully enjoy the process of playing large fish. However, for fishing to be successful, it is important to take care of preparing the right tackle and choosing the most suitable feeder mount. Below you can familiarize yourself in more detail with the
features of feeder fishing on the current and with the correct installations that can be used when fishing on the river.
Feeder mounting [/ caption]

What is feeder mounting

Feeder mounting is the method of mounting all elements on a fishing line or a braided line when fishing with a tackle of the same name. There are several types of feeder editing:
Inline ,
Paternoster , Helicopter, and others that perform important functions:

• feed delivery;
• holding the position of the rig at the bottom;
• bait presentation;
• transfer of bite.

In the course of performing the listed tasks, various elements of the snap-in are involved.
Installation with a feeder implies that the tackle is feeder [/ caption]

Why special installations are needed during the course, what is the reason

When choosing an installation, it is very important to take into account the strength of the flow of the reservoir. If the current is strong, the angler should use a heavier feeder, which should be streamlined. Triangular-shaped models are also suitable. In the middle reaches, avid fishermen advise installing square feeders. Round models are only suitable when there is a slow current on the river. It should be borne in mind that in a strong current, a thin main line is used, but quite strong. The tackle and reel should also be more powerful.
Feeders with lugs for flowing on fast rivers – the best choice [/ caption]

Advice! To exclude the shooting of mounting during the execution of a power cast, experienced anglers recommend using a
shock leader (thick monofilament or fluor).

Features of feeder fishing on the current – what kind of tackle do you need?

Experienced fishermen draw the attention of beginners to the peculiarities of feeder fishing on the current. Thin braid / line should be used to achieve a reduction in windage. In addition, the optimal weight of the feeder should be selected. The mass is increased gradually using weights or more powerful coils. If the current is strong, it is better to install a triangular / streamlined feeder with small lugs.
Feeder with grouser [/ caption]

Newbie tip! When playing out large fish, it is better not to rush to raise it above the surface of the reservoir. It is worth gradually bringing it to the shore, taking time to make the fish tired.

Having made the decision to go to a body of water with a fast current, you should take a responsible approach to the choice of tackle elements.

River feeder rod

If you plan to fish from the coastline, you should give preference to tackle, the length of which is within 3.8-4.5 m. long cast, and the feeder to gain a foothold on the bottom surface. It is necessary to give preference to powerful models, the use of which makes it possible to easily throw a heavy feeder over long distances. https://tytkleva.net/lovlya-mirnoj-ryby/lovlya-na-fider/udilishhe.htm

Reel, leash and line

The use of a heavy feeder itself provides significant resistance even when it is pulled out of the water. Resistance increases especially at the time of playing fish, so the size of the reel should be 3500-4000 Shimano. It is important that more than 150 m of braid / line can be placed on the spool of the reel. The clutch of the device can be either with a front clutch or with a rear one. https://tytkleva.net/lovlya-mirnoj-ryby/lovlya-na-fider/kak-vybrat-katushku.htm For fishing on the current, fishermen should make leashes from monofilament / fluorocarbon. The second is used for angling cautious fish. When choosing the thickness and breaking load, it is worth considering the size of the intended production. As a rule, fishermen use leashes with a diameter in the range of 0.14-0.2 mm. For feeder fishing on the current, not only a monofilament, but also a braided line is suitable.It should be borne in mind that the latter is highly durable and does not sail in water. This allows for the most accurate long distance casts.

Feeder for feeder fishing on the current

There is a wide range of feeders in fishing shops. However, for a strong current, only those models are suitable, the outlines of which are streamlined or triangular. It is advisable to use the square structure in a moderate current. https://tytkleva.net/lovlya-mirnoj-ryby/lovlya-na-fider/kormushki-dlya-silnogo-techeniya.htm If the bait is washed out too quickly, experts advise using a closed feeder. The mass of the feeder is selected during the fishing process. It is important that the trough is not carried away by the current. Therefore, in the arsenal of a fisherman there should be models with different weights (30-150 g).

Advice! After casting, it is necessary to wait for the moment the feeder touches the bottom surface and control how the tip will react to this. If no changes have occurred, it is worth delivering the cargo, the mass of which is less. Ideally, after the feeder touches the bottom, several oscillations should occur, after which the tip of the tackle will stop, which will indicate that the feeder is fixed on the ground.

Hooks

It is important to take a responsible approach to the choice of hooks. They must be sharp and made of good quality wire. If there is an increased activity of the fish, it is worth equipping the rod with hooks with a straight sting and a long forend. On days when the fish is especially careful, it is worth using short hooks with a sting bent inward.

Leadcore

Lidcore is a braid with a metal core located inside. The braid can be dyed in camouflage / dark colors. Feeder rigs are mounted on the cord according to the Method / Flat method or mounting with a spring. The presence of a heavy core allows the rig to be pressed to the bottom surface. While playing, leadcore will prevent accidental damage to fish scales.
Installation with leadcore [/ caption]

The best rigs for feeder fishing in current conditions

Feeder assemblies have different sensitivities. The most sensitive types of installation include symmetrical and asymmetric hinges. Paternoster is endowed with medium sensitivity. Helicopter and anti-twist mounts are considered the least sensitive options for fishing in strong currents. When choosing a mounting, you should pay attention to the speed of the current and the degree of activity of the fish.

Note! When the underwater inhabitants are active, there is no point in knitting complex rigs.

Self-Locking Feeder Mount for Flow

Paternoster (Gardner loop) – editing, which has good sensitivity. When biting, contact with the bait is first signaled by the tip of the feeder. Only after this does the trough begin to move. Step by step process

1. Taking a piece of cord / fishing line, the length of which reaches 50 cm, you need to retreat about 12-15 cm from the edge and make a loop 14-15 cm in size.
2. A swivel with a clasp for a feeder is thrown over the loop.
3. At the end of the fishing line, which has remained free, a loop is knitted to which the leash is fixed, following the loop-to-loop method.

Gardner loop [/ caption] Paternoster is especially effective during periods when there is a peak in fish activity. Quite often the prey is self-sensing.

Feeder rig for strong currents and drift fishing

If you plan to fish in a pond with a strong current, or to fish for demolition, you should give preference to the installation of “Helicopter”. On the current, the leash with a hook begins to rotate around the fishing line, imitating the movements of a helicopter blade, which will attract the attention of even a well-fed fish. Installation “Helicopter”:

1. When starting the installation of the rig, it is worth preparing a fluorocarbon line, the diameter of which does not exceed 0.35 mm, and the length reaches 120 cm.
2. The fluorocarbon is folded in half.
3. Having retreated 15 cm, make a figure eight knot and put on a swivel.
4. After stepping back 1 cm, tie the knot again. A fastener with a swivel for the feeder is inserted into the loop.
5. The leash is tied between the knots to a swivel.

Mounting “helicopter” [/ caption] As a result, the feeder should slide freely along the loop, and the leash should rotate around the base. Feeder rig for current fishing – which mounting to choose when fishing on a river with a medium and fast current: https://youtu.be/kgfgM73XeGY

The most sensitive feeder mount for flow

When fishing a body of water with a strong current, it is worth using the popular feeder mounting – an asymmetric loop, characterized by increased sensitivity. To be sure that the rig is made correctly, it is necessary to check whether the feeder will move smoothly from the knot to the twist. Step-by-step process for making an asymmetric buttonhole

1. First of all, you need to prepare a piece of fishing line, the length of which will reach 100 cm.
2. The fishing thread is folded in half.
3. With the help of an eight knot at the tip of the resulting loop, you need to make a miniature loop. You will need this loop for a hook leash.
4. Behind the knot, it is necessary to make a twist, the size of which will be 10 cm and fix it with a surgical knot.
5. On the tip that remains free, you should put on a swivel with a fastener for the feeder.
6. Having departed 20 cm from the twist area, you will need to tie a stopper knot so that the length of the tip with the swivel is a couple of cm larger than it.

The asymmetric loop can be used when fishing a body of water with a strong current. Keep the leads short to prevent tangling.
Asymmetric hinge [/ caption]

What tackle is needed for fishing on the current

To fish on the current, you need a fast-action feeder, which is often called a river. It is very important to adhere to this recommendation, because the current will exert a load on the line, which will transfer it to the tackle. Due to the heavy load, the slow action feeders “roll into a bagel”. If you plan to fish a large reservoir with a powerful flow of water, you should give preference to a Medium-Heavy class rod. For long distance casts, it is recommended to purchase Medium / Heavy / Extra-Heavy tackle, the test of which exceeds 90 grams. To start collecting the feeder, you need to take care of purchasing:

• feeder rod;
• spinning reel (gear ratio 4.6-5.5, spool size 3000-4000, 6-10 bearings);
• lines / braids (0.25 / 0.22 lb);
• leash line (fluorocarbon 0.16-0.18 mm);
• feeder equipment;
• feeders.

You will also need to buy hooks with a sharp sting, the size of which is equal to # 6-10 (depending on the estimated weight of the prey).

Fishing with a feeder on the current – tactics and strategy

For fishing with a feeder on a small river to meet expectations, it is necessary to fish not only near the coastline, but also deeper places. This will increase the likelihood of finding a reverse flow area where fish are most actively feeding. Indeed, it is in these areas that a large amount of fodder material accumulates, which is washed out from the bottom of the small river and the coast. A stronger current is observed in a small reservoir than in wide river reaches. Because of this, experienced fishermen advise casting at an angle of 30-45 ° to the coastline, which will help weaken the effect of flowing water on the feeder, and it will not slide down.
Casting feeder tackle [/ caption] If you plan to fish on a large river, you should use a rod longer than 3.5 m. The tackle is set in such a way that the tip is located as high as possible so that there is a minimum of line / braid in the water. This will make it possible to reduce the impact of water on it.
Location of the feeder equipment at the bottom of the reservoir for demolition [/ caption] To prevent the feeder from rolling over the surface of the bottom of the reservoir, it is necessary to give preference to massive models of triangular shape. However, using the heaviest feeders is best avoided in order to prevent loss of sensitivity. If the river is very fast, it is worth installing an additional weight.

Advice! When fishing medium and large rivers, it is recommended to use an asymmetric loop or Paternoster.

Asymmetric loop for the feeder with insertion of feeder rubber lures, casting tackle and fishing tactics, as well as what to do if it blows the feeder: https://youtu.be/AyXPSP9109M

Feeder fishing for different types of fish

Below you can familiarize yourself with the peculiarity of catching various types of fish with a feeder on the current.

Bream

Paternoster is considered to be the most popular feeder assembly
for bream fishing . Such installation will delight you with sensitivity to bites and simplicity. The movements of the fish are clearly transmitted to the tip of the tackle. In addition, it should be borne in mind that even if the feeder is immersed in the silt, the nozzle with a hook will remain in sight. If fishing is carried out on the current, it is worth using long lines, because the bream prefers to eat moving food, so it is important to achieve imitation of these movements. Fishing with a feeder in a strong current on the Don River – how to fish in difficult conditions: https://youtu.be/0FKB9oq4uPk

Ide

For ide fishing, a sufficiently sensitive installation is used so that even the slightest touch of the bait is reflected on the tip of the tackle. When fishing on the current, it is recommended to use an asymmetric loop. The length of the leash, the thickness of which is 0.16-0.18 mm, should reach 40-70 cm. The functions of the main line can be performed by both a monofilament and a braid.

Carp

When fishing for carp on a pond with a strong current, you should use the most suitable installation: asymmetric loop, Paternoster, loop Method. The asymmetric loop is used most often, because it has proven in practice its increased sensitivity and effectiveness. The process of catching carp should be passive. As soon as the fish has swallowed the bait while absorbing the bait, you can hook up and pull it ashore.
Feeder bait in a feeder type method [/ caption]

Note! When fishing for carp, the re-throws are not done more often than 1 time in 15-20 minutes.

Roach on the current on the feeder

The roach draws attention to the lure that falls slowly, so avid fishermen advise using the “Helicopter” mount and a couple of knots. There are no twists and a thick bend that makes the leash closest to the main cord heavier. The leash should be quite thin, but long (up to 3 m). On the course, such a bait will fall for 5 minutes, which will undoubtedly attract the attention of the fish. https://tytkleva.net/lovlya-mirnoj-ryby/lovlya-na-fider/osennij.htm There are many types of feeder mounting for flow. It is impossible to say unequivocally which one is better, because every angler chooses a rig for himself, taking into account the speed of the current and the degree of activity of the fish. In cases where there is no bite for a long time, do not be afraid to experiment and make other rigs.This approach will allow you not to be left without a catch even on the worst day.

Поделиться ссылкой: