The Gardner Loop rig is designed for feeder fishing . It belongs to the category of the classic ones, those that have been proven to be efficient in use over the years. The Gardner Loop can bring the fisherman a catch if this rig is designed and used in the right conditions.
What is the peculiarity of Gardner’s feeder mounting
This fishing method has shown efficiency for roach , silver bream , bream , rudd and some other fish species. Loop rigs allow you to easily capture the bite and behavior of the rig by transferring motion to the rod tip. Gardner sliding loop [/ caption] This rig was invented by the British fisherman-sportsman Steve Gardner. The Gardner loop is a type of paternoster . In feeder and bottom fishing, it is one of the main rigs. General principle of paternoster rig installation [/ caption] The main feature of this variety is the special attachment of the feeder trough . Here it slides freely inside the loop.
Pros and cons of installation
The advantages of this installation method are:
Simplicity and ease of installation.
Versatility that allows you to use the tackle in the presence of a current and in stagnant water , on a hard or muddy bottom.
Good bite sensitivity.
When using such a rig, there is practically no tangling of the thread.
Possibility of self-hooking of pecked fish. This does not always happen, but this option is quite realistic.
The parameters of the rig are selected in such a way that the loop with the feeder feeder does not reach the leash.
Shows good catchability in areas with uneven bottom.
The following are noted as disadvantages:
In terms of bite sensitivity, it is inferior to some other feeder gear, for example, an asymmetric loop . Braided rigs – symmetrical and asymmetric feeder rigs [/ caption]
With long casts, the risk of overlapping the main line increases.
When fishing in the current, the sensitivity to the bite is reduced.
Where the feeder is attached to the line, there is a high risk of chafing during fishing.
If the attachment of the feeder is done without using a swivel, it can twist the main line during fishing.
To get rid of the twisting of the line, it is enough to raise the tackle from time to time, giving it the opportunity to spin independently in the right direction.
How to knit a Gardner loop for a feeder
This tackle is made using monofilament or braid. The most commonly used diameter is 0.15-0.35 mm. To make such a snap-in, you need to follow these steps:
Before starting work, you need to prepare everything you need. You will need a main line, a leash, a feeder feeder , a swivel to attach it.
At the end of the line, a small, non-tightening loop is made. To create it, it is convenient to use the figure eight node . To do this, first fold the tip of the main line in half. Then make a simple loop. The tip is pushed into it. After that, the knot is tightened. You will need this loop to attach the leash.Figure eight [/ caption]
Now you need to create a loop, inside which the feeder will move. To do this, you first need to set aside 20-25 cm from the end of the main line. Here the main line is tied in half. The length of the resulting end should be approximately 15 cm. These dimensions can be changed if the following condition is met. The length of the loop should be such that it cannot get confused with the leash during fishing.
It is necessary that a swivel be put on the main line in advance, which, when creating a loop, must be inside it. A feeder trough should subsequently be attached to it.
The loop is created using a figure eight or surgical knot. It is tied so as to secure the edge of the loop.
A feeder trough is connected to the swivel.
On the leash, you need to create a small, non-tightening loop. It is done in the same way as the loop at the end of the main line.
The leash is attached to the line in a loop-to-loop method. To do this, the loop of the leash is threaded into the one on the main line. Then the other end of the leash is threaded into its own loop. The tackle is now ready.
The finished tackle looks like this: When creating a loop at the end of the main line, you can also use a surgical knot. It is created in the same way as an eight, but with one difference – the double end of the fishing line is inserted not once, but three times. Such a knot is more durable. Knitting such a tackle is not difficult for either experienced fishermen or beginners. To master all its subtleties, it is enough to practice several times. Sometimes, when creating gear, options are used that have slight differences. For example, a part of the main line running from the loop of the feeder to the point of attachment of the leash is made in the form of a twist. This reduces the risk of tangling the gear.
How to use a loop in feeder fishing
To use this tackle, you need to prepare several copies in advance before fishing. During fishing, they can simply be changed as needed. The use of this rig will work in most cases, but it cannot be considered a panacea for all occasions. To ensure the highest sensitivity, good contact between the mount and the quivertip must be ensured. In this case, all the actions of the fish will be transmitted to the tip of the rod: biting, touching. This will allow the fisherman to see everything that is happening and react accordingly.
It should be borne in mind that in certain fishing conditions, bites can be transmitted poorly. This can happen, for example, in cases where the line is blown away by the wind in an arc or it bends under water over the edge.
With a strong current, the leash with a hook may not lie on the bottom, but float in the water column. This is very attractive to some fish. For example, sometimes in this way you can even catch bream and crucian carp. How to knit a Gardner loop for a feeder – a simple and effective rig with a visual video: https://youtu.be/UmcvDx_ltcw
Tips and Secrets
Although the leash can be attached in a variety of ways, the loop-to-loop method is more advantageous. It prevents the line and leash from twisting. We need to keep an eye on that. So that the length of the branch from the loop to the leash exceeds the length of the leash. In the process of fishing, it is important to choose the right feeder. Metal is convenient to use at depth due to the fact that they sink quickly. The negative side is that they collect algae and various underwater debris when they rise, and are also able to catch on a snag when climbing. If fishing takes place in stagnant water, then it must be borne in mind that feeders made of plastic have proven themselves well under these conditions. When using them, it should be borne in mind that they slowly sink and during the diving process they can attract small fish to the bottom. It should be borne in mind that the use of this rig will be effective in cases when the fish grasps the bait completely, and not only bites off from the edge. If at the same time she immediately tries to sail, then the signal will be clear and strong. However, other situations are also possible,when the fish just bites the bait and tries to swim away with it, without trying to swallow it right away. In this case, the sensitivity of the bait will be reduced. This effect will be stronger when larger hooks are used. In such cases, the situation can be corrected by a small alteration of the tackle. To do this, it is enough to make the leash longer and the hooks smaller. It is difficult to immediately determine which version of the rig in a particular place is more catchy. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.In this case, the sensitivity of the bait will be reduced. This effect will be stronger when larger hooks are used. In such cases, the situation can be corrected by a small alteration of the tackle. To do this, it is enough to make the leash longer and the hooks smaller. It is difficult to immediately determine which version of the rig in a particular place is more catchy. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.In this case, the sensitivity of the bait will be reduced. This effect will be stronger when larger hooks are used. In such cases, the situation can be corrected by a small alteration of the tackle. To do this, it is enough to make the leash longer and the hooks smaller. It is difficult to immediately determine which version of the rig in a particular place is more catchy. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.when large hooks are used for fishing. In such cases, the situation can be corrected by a small alteration of the tackle. To do this, it is enough to make the leash longer and the hooks smaller. It is difficult to immediately determine which version of the rig in a particular place is more catchy. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.when large hooks are used for fishing. In such cases, the situation can be corrected by a small alteration of the tackle. To do this, it is enough to make the leash longer and the hooks smaller. It is difficult to immediately determine which version of the rig in a particular place is more catchy. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.Which version of the rig in a particular place is more catchy is difficult. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.Which version of the rig in a particular place is more catchy is difficult. It is more convenient to do this by testing various options for equipment. Gardner’s Double Hook Fishing Feeder Loop: https://youtu.be/Y_fZsVVbZp8 While the Gardner Loop makes self-notching possible, it is rare and should not be counted on. Therefore, such a rig is better suited for those who love active fishing. If the fish is not spotted in time, it may leave.
