How to cast a feeder correctly: the technique of casting at one point and over long distances

Beginners in feeder fishing
often find it very difficult. In reality, this is not true. During the casting of the tackle, the main thing is the accuracy of hitting the place of fishing from time to time. To learn how to cast the feeder correctly, you need to practice a lot, and at first it is better with a regular load without a hook, constantly monitoring the casting technique. With practice comes range and accuracy.

Feeder rod casting technique

To attract fish, you need to feed a specific section of the reservoir. Learn to constantly throw the tackle in one place so as not to scatter complementary foods throughout the reservoir. How to cast the feeder correctly:

1. The feeder tackle must be properly assembled . The rings must be clearly in a row, this significantly affects the accuracy and casting distance.
2. To improve the technique, it is better to make the first casts without a feeder, using ordinary weights . It is cheaper and flies more accurately.
3. We wind the sinker to the top of the rod at a distance of 1 meter .
4. With one hand, hold the rod near the spool leg . With your index finger, press the fishing line to the fishing rod. The second is to hold the end of the handle.
5. In order to prevent the tip breakage due to the tangling of the fishing line behind the rings, it is necessary to constantly monitor the condition of the top of the blank .
6. Move the feeder smoothly . The coil is pointing towards the top. Your finger is pulling on the line or line.
7. We throw in the rod . The hand holding the handle goes to the chest, the second is aligned. When the form is upright, let go of the forest with your finger.

After casting, when the weight is in flight, the feeder is returned to the vertical position. This will help compensate for the impact on the cord when attaching it to the clip. When the above points have been mastered, then you need to learn how to throw the feeder at exactly one point. To accomplish this, you must:

1. Choose a landmark on the other side. For example, wood, house, stone. This will help to accurately cast over the horizon.
2. For the correct casting distance, the line must be secured in a clip.
3. Before throwing in, you need to make sure that the end of the handle looks exactly at the landmark.
4. Hands are raised and straightened. The reel and rod are positioned overhead. The handle is aimed at a landmark.
5. Casting in progress.

The technique of casting a feeder to one point

When the basic technique of casting a feeder is mastered, more complicated options can be mastered. This can be done when all movements are already taking place completely automatically:

1. Power casting is performed in the same way as the standard one, but differs in high gain. It is used when fishing at long distances. The gain can be increased with the swing and the correct step. When throwing the left foot at the step, the body weight of the angler is added to the inertia of the flight of the rig. Usually used by experienced anglers, as any wrong movement will break the gear or break the rod.
2. With pendulum casting, experienced anglers skip controlling the tackle before swinging. As a rule, it is used for sport fishing, as it saves time and quickly feeds the site. The angler must intuitively feel that everything is fine with the rig.
3. The match cast is almost the same as the pendulum cast . The difference lies in the greater sagging of the rig. With this method, the tackle is located approximately at the level of the reel. This allows for fast casts over short distances. Convenient to use on ponds with limited casting space.

https://youtu.be/hCpqJ7H8Q34

How to throw the tackle at one point

Before throwing in the feeder, you need to find a promising area and fix the line at the desired length. For this, several fixing methods are used. Under the clip on the spool and under the elastic. The latter allows you to better fix the line and when biting flies off the spool. If you attach the line with a clip, the friction brake will not work. For it to start working, you need to reel the fish about 15 meters. If the trophy resists strongly during fishing, then the equipment breakage is likely. To quickly find the attachment point, the line is marked with a special marker. This allows, after casting, to accurately restore the required distance and throw the tackle at one point. The accuracy of the throw also depends on the place from which it is performed. So if this is a
chair, then further casts must be performed from it. In some cases, anglers use their own footprints or draw a line on the ground.

Conditions for long distance casting

First you need to understand that the casting distance is not needed all the time. Often the fish is on the nearest edge, at a distance of up to 50 meters. However, you still need to know how to properly cast a feeder over long distances. First you need to learn accuracy and then go to range. Increasing the casting distance will allow the use of appropriate fishing gear.

Rod

You need to choose the right feeder, thanks to which you can throw the rig far away. The rod must meet certain characteristics that exclude the risk of tackle breakage or lack of inertia. Criterias of choice:

1. Rod length 3.6-4.2 meters. The longer, the further the rig will fly.
2. Casting at least 80 gr. Moreover, the weight of the weight should be no more than 75% of this indicator.
3. Slow feeder action. So, during the cast, when the work of the hands is over, the blank continues to level out and the flight speed of the rig increases.
4. Lead rings. The larger they are in diameter, the better the line coming off the reel.

Coil

For long casts, it is recommended to choose
feeder reels with a low profile spool. As a rule, products with at least 4 bearings are used. In this case, 2 support ones are in the handle, 1 in the line guide and 1 on the spool shaft. The design can include a
bytruner , this makes it possible to set the coil in several modes: waiting for a bite and fishing.
Bayruner [/ caption]

Ultra-long casting technique

For extra long casting of a feeder rod, the carp angling technique is often used. It is necessary to perform a power cast, while the blank falls lower than with a standard cast. About 5 steps are taken for the “run-up”. At the last step, the center of gravity shifts and the inertia of the torso is added to the swing. It is necessary to hold the rod correctly, hands must be straight. With this cast, you can throw the rig to 120-150 meters. Fishing at this distance is not always comfortable, but sometimes it happens that the only promising point is located at a very long distance. Therefore, you need to know how to cast a feeder in any circumstance.

How to install the rod after casting

As a rule, anglers will install the feeder based on the bite alarm being used. If the rod is equipped with bells, then after casting it is recommended to set it in an upright position. If an electronic signaling device is used
, the feeder must be horizontal. In strong winds, the rods are also set horizontally anyway.
Feeder installation after casting [/ caption]

The main mistakes of fishermen when casting

In order to avoid oversights when throwing, it is necessary to take into account certain conditions that allow the feeder rigs to remain intact and reduce the cost of consumables:

1. Raise the rod to the top and loosen your hand a little when completing the cast. This will prevent the tackle from being shot. This is all the more important if the line is wound behind the clip.
2. Before any cast, the clutch must be tightened. If this is not done, then during the casting, the spool, without being under load, will turn. Flying off the line can severely cut your fingers.
3. All the time you need to check that the line passes freely through the rings. This will help both to preserve the tackle and to avoid breakage of the feeder tip when overlapping.
4. When learning the casting technique, you don’t need to be too zealous. It must be remembered that an excessively strong swing with the line installed can provoke the shooting of the tackle. Often in these conditions, the feeder can be completely broken.
5. Constantly look back and look for branches and other fishermen behind.
6. It is forbidden to fish with any carbon rod under power lines and in a thunderstorm. Carbon has the ability to conduct current.

How to cast a feeder with a feeder correctly, video for beginners: https://youtu.be/hCpqJ7H8Q34 With the help of these simple recommendations, you can successfully learn how to make a correct feeder cast, while the rig will fly to the same fishing spot and the tackle will last a long time time, and trophy specimens will peck much more often.

Поделиться ссылкой: