Herabuna is a type of Japanese fly rod fishing, perfected and elevated to the rank of the highest fishing techniques. It originally appeared in Japan and then spread throughout Asia. It got its name from the Japanese flat carp of the same name. It combines the fishing method, specific tackle and used baits and baits.
It is believed that this method got its name from the Japanese “dick” – a spatula, the inhabitants of Japan sometimes call the local crucian carp – herabuna.
The main difference between kherabuna fishing and the usual “maha” is that a special dough is used to catch and attract fish. No other baits or baits are used. For bait, the same dough is used, but with a looser bone structure, located on the upper hook, which is dusting on the lower hook with a nozzle. We can say that the herabuna is quite aesthetic type of fishing, since the lightest and most delicate tackle is used, and also does not require the use of worms and other larvae that are disgusting for some people. It is also a very active and dynamic way of fishing, in which bites follow one after another and during the activity you should not waste a minute.
Tackle used
The first thing that distinguishes the kherabuna from other types of fishing is the tackle used. The rod was originally made from bamboo, which was reusable. Today it is made from special composite materials. The peculiarity of such rods is the very slow action, which is popularly called “noodles”. Since the fishing takes place without a reel and a friction clutch, such a rod is designed to dampen the jerks of large fish with a dull rig. A ring is attached to the rod handle, which is connected to the fisherman’s chair through a carabiner with a rope. This is insurance so that, again, large fish cannot drag the rod away. A special rubber is attached to the tip of the rod, to which the fishing line clings, it also dampens the jerks of the fish. The rod length is a multiple of 0.9. This is a Japanese measure of length. That’s why rods have such a strange length of 3.6, 4.5, 5.4, 6.3.The fishing line is not thick, up to 0.2 in diameter. When fishing for crucian carp, even 0.14 main line is suitable. On the leash, they put the fishing line one or two steps less. The best option for catching a herabun is a sinking line or a harder wind. Another feature of catching herabun is floats. These are very long alarms with a long keel, body and antenna. It is customary to store them in special cases. The floats are attached using a special float connector. Fixed on the line with stoppers. Such a long float shows a bite very well in stagnant bodies of water. The best option for catching a herabun is a sinking line or a harder wind. Another feature of catching herabun is floats. These are very long alarms with a long keel, body and antenna. It is customary to store them in special cases. The floats are attached using a special float connector. It is fixed on the line with stoppers. Such a long float shows a bite very well in stagnant bodies of water. The best option for catching a herabun is a sinking line or a harder wind. Another feature of catching a herabun is floats. These are very long alarms with a long keel, body and antenna. It is customary to store them in special cases. The floats are attached using a special float connector. Fixed on the line with stoppers. Such a long float shows a bite very well in stagnant bodies of water. Such a long float shows a bite very well in stagnant bodies of water. Such a long float shows a bite very well in stagnant bodies of water.
It should be noted that the special dough is also involved in the loading of the float, since the latter is very sensitive. Thus, if there is dough on the hook, then the antenna of the float is almost completely submerged in water, as the bait is washed out and crumbled, the antenna rises above the water. When completely shedding, it completely sticks out of the water – this is a sign that there is no attachment on the hooks, and the cast needs to be repeated.
Installation of equipment
The assembly of all tackle is carried out directly on the reservoir. Rod, line, float, leash – all this is assembled on the spot. When fishing, two hooks are used, one above and the other below. The one above uses a larger hook made of thicker wire. It is used to attach the groundbait dough, which crumbles directly onto the bottom hook. The lower one is taken in a smaller size and from a thinner wire. A denser dough is placed on it. There are a lot of marks on the antenna of the Herabun float, which are easier to observe when biting. With the help of a lead tape, the float is immersed at the beginning of the float body. When fully loaded with the dough on the hook, the float sinks lower. The bottom hook should not touch the bottom surface slightly. As soon as the dough falls off the hooks, the float rises higher to the initial load, exactly along the body of the float,which signals that it is time to change the nozzle.
Rigging and installation of a kherabun float rod in detail (selection and loading of a float, loads and rods):
https://youtu.be/Iu2Zf_0tw_o
Cooking Herabuna dough
The used Herabuna lure is another distinctive feature of this fishing. This is a dry mixture, mixing which you can get both a groundbait and a nozzle. It all depends on the amount of added water and gluten. More and more dry mixes of herabun appear on the market. They can be bought both in Chinese online stores and in domestic ones. There are over 400 different flavors for dry mixes. The composition of the bait bait is a trade secret. It is stated that cereals are used in the manufacture. The main feature of the resulting dough is the ability to dust in water with the separation of large flakes and particles. But the dough ball itself retains its shape. According to the degree of dusting, the filling dough can be divided into quick-dusting, medium-dusting and low-dusting. More gluten is used to get the batter version of the dough.Basically, gluten is the gluten from grains that keeps the ball from falling apart on the hook. Knead the dough in special vessels, separately for bait, separately for the nozzle. Manufacturers often indicate how much water to add to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00be / lVBpTpt8b00be / lVBpTpt8b00be / lVBpTpt8b00be / lVBpTpt8b00which prevents the ball from falling apart on the hook. Knead the dough in special vessels, separately for bait, separately for the nozzle. Manufacturers often indicate how much water to add to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00which prevents the ball from falling apart on the hook. Knead the dough in special vessels, separately for bait, separately for the nozzle. Manufacturers often indicate how much water should be added to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00Knead the dough in special vessels, separately for bait, separately for the nozzle. Manufacturers often indicate how much water should be added to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00Knead the dough in special vessels, separately for bait, separately for the nozzle. Manufacturers often indicate how much water to add to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00Manufacturers often indicate how much water to add to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Further from the dough, a piece of the desired size is torn off, rolled into a ball and put on a hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00Manufacturers often indicate how much water should be added to the dough. Although all the information on the packages of the kherabun test is most often in a language incomprehensible to the local resident, it is not difficult to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00it is easy to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Further from the dough, a piece of the desired size is torn off, rolled into a ball and put on a hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00it is easy to understand how much water to add – this information is indicated schematically. For accurate water metering, use a measuring glass. If you overmoisten the dough, it will be difficult to fix something. Therefore, it is better to immediately add the required amount of water. Farther from the dough, a piece of the desired size comes off, rolls into a ball and sits on the hook. The ball is rolled in a size that fits the size of the hook. How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00How to make a dough for a kherabun float tackle with your own hands: https://youtu.be/lVBpTpt8b00
Bait dough
The bait dough is made from the same mixes with less gluten. The bait in catching a herabun is a lump of dough placed on the upper hook. Particles are detached from this groundbait ball and fall onto the bottom hook. In some ways, the principle of fishing is similar to fishing on the top, where the disintegrating top creates a bait cloud, and a suitable fish, feeding on volatile particles, also sucks in the hook. This happens quite often and underwater surveys show that the fish swallows the hook by accident, rather than trying to eat the bait on the hook. Therefore, bait dough in catching a herabun has a very important role. By kneading the dough and adding gluten to it, you can regulate how much the dough will disintegrate in water. The best option for the disintegration of the groundbait ball is 1.5-2 minutes.
How to make dough with your own hands
Herabuna is very reminiscent of our classic swing fishing with semolina chatter. There, too, the resulting mass crumbles from the hook, which attracts the fish to the fishing point. Some people liked certain aspects of catching a herabun. For example, long sensitive floats or catchy dough. Something like that for a kherabun dough can be made from ingredients familiar to us. To do this, you need a glass of mashed potatoes, half a glass of bread crumbs, a tablespoon of gluten. You can add a tablespoon of milk powder for flavor and cloudiness. The resulting mixture is thoroughly mixed and brought in dry form to the reservoir. And there they already add water. This is done by analogy with purchased mixtures, gradually adding water and thoroughly mixing the resulting dough.
How to catch a kherabuna
Fishing for Herabuna occurs in different layers of water. Depending on this, a tooling is chosen that is suitable for these conditions. There are two options for bottom fishing. In the first version, both hooks lie at the bottom, both with a nozzle and with a groundbait. In the second version, only the bottom hook touches the bottom, and from the top hook the bait crumbles to the bottom and the bottom hook. To clearly position the lump of dough above the bottom, you need to correctly measure the depth. To do this, use a depth gauge. This is a weighty rubber ball with a metal insert inside. This ball is hung on the top hook and thrown into the water. Next, the float is set to the required depth so that only the edge of the antenna sticks out of the water. Then the ball is removed and a ball of groundbait dough is already hung in its place. When fishing in the floor of water, the weight needs to be slightly changed.Now, not only the bait dough will be shipped by the float, but also the dough located on the lower hook. To prevent the float from completely sinking under the weight of the hooks, you need to reconfigure the tackle.
