How to tie a fishing line to a fly rod with and without a connector

How to tie a fishing line to a fly rod –
general principles and rules,
with a rope at the end,
without a connector,
without a ring and mounting
with a connector.

How to tie a fishing line to the tip of a fly rod

The fly rod can be considered the most ancient recreational fishing tool. Although, of course, people in the past did not fish for pleasure, but for their livelihood. If you can simply tie a fishing line to its end to a fishing rod cut from willow or birch, then this number will not work with modern fly rods. The knot will simply slide off the tip of the fishing rod. In fishing stores, fly rods are sold in the following versions:

• with a rope at the end;
• with a wire ring or loop at the tip;
• with a loop of fishing line;
• without any additional accessories.

Based on how the tip of the fly rod looks like, the fishing line is attached. This article discusses various ways to tie a fishing line to a fly rod.

Max with a rope at the end

If the purchased rod has a rope at the end, then the question of how to tie a fishing line to a fly rod with a rope at the end is solved quite simply. To do this, the following steps are performed:

1. A sliding loop is made at the end of the fishing line.
2. The loop is put on the end of the rope and tightened.
3. The end of the rope is melted with a lighter so that a thickening forms on it.

Usually the rope has a length of five centimeters. It almost does not extinguish jerks of fish and is equipped with rods of the budget category.

Fly rod rig with thread at the end

A thread is a thin, strong rope, so everything is done the same way. How to tie a fishing line to a fishing rod with a thread at the end, you can learn by reading the advice of experienced anglers.

How can I tie a fishing line to a fly rod without using a special connector

A connector is a special device with which the fishing line is fixed to the tip of the fly rod. In principle, such an attachment is the best way to fix the fishing line, however, this requires choosing a connector that is suitable in diameter to the thickness of the end of the fishing rod, which is not always possible. Therefore, you need to know how to tie a fishing line to a fly rod without a connector.

With the help of a cambric

If the cambric sits tightly on the tip of the rod, then it will hold the line securely. Usually, two methods of fastening with a cambric are used, namely:

• With one cambric . A knot is tied at the end of the fishing line, and then it is threaded through the hole in the cambric. The latter is pulled tight on the tip of the rod.
• With two cambric . In the first one, the fishing line is threaded in the same way, after which the cambric is shifted further from the tip of the fishing rod and slightly melted. The fishing line is threaded through the second cambric, which is already fixed at the very end of the rod.

Attention! Silicone cambrics are considered the most reliable and durable. They are inferior to plastic ones. The least durable are nipple gum.

With a ring

If you have thin wire or thick fishing line on hand, you can make a ring or a loop. They are attached to the tip of the rod with a thread that is glued with waterproof glue. And how to tie a fishing line to a fishing rod with a ring, you can guess for yourself – either with a tightening loop or a fishing knot, for example, a “
clinch ”.

With a pin

Use a pin with a ring on the end, which is tied to the tip of the fly rod.

How to attach fishing line to the connector

There are several types of connectors, namely:

• plastic, working on the principle of a lock;
• rag with a loop at the end;
• rubber with a loop at the end.

Any connector needs to be fixed on the tip of the fly rod. This is usually done with waterproof glue.

Healthy! Superglue has the property of softening at high temperatures. If the rod tip breaks off, you can try to remove the connector by gently heating it with a lighter. Although it is plastic, it may be possible to remove it. The connector is cheap, but when fishing there are situations when there is nowhere to get a new one.

How to attach fishing line to a simple connector

Having put the connector on the tip of the fishing rod, you can easily understand its design and understand how to tie a fishing line to the connector without a ring. You need to make a loop at the end of the fishing line, open the connector, insert the loop, and then close it like a carabiner.

How to attach fishing line to a rag connector

How to tie a fishing line to a rag connector? At its end there is a loop to which the fishing line is attached either by the “loop to loop” method or by tying the tip of the fishing line to the loop. https://youtu.be/MBg6V7kvjmA

How to attach a fishing line to a rubber connector

The rubber connector is used when catching large and strong fish. Since the fly rod does not have a reel, the angler has to rely on the strength and elasticity of the rod, as well as on his own experience. The rubber connector acts as a shock absorber when playing the fish. https://tytkleva.net/lovlya-mirnoj-ryby/poplavochnaya-snast/maxovaya-udochka.htm Experienced anglers using fly rods always have a stock of ready-made rigs with different line thicknesses, with several floats that differ in carrying capacity, and also with hooks of different sizes.

Поделиться ссылкой: