How to cast a spinning rod correctly – we set a long and accurate casting of the tackle

Spinning fishing is the most common fishing method around the world. Over the past couple of decades, spinning has gained incredible popularity and has become on a par with bottom fishing and float fishing used since ancient times. In particular, spinning fishing is aimed at
catching predatory fish species , which means that a worthy battle with a strong and aggressive opponent is ensured during fishing. At such moments, not only the skills and experience of the angler are important, but also the quality of the tackle that he uses. Also, an important factor is the possession of tackle, spinning, in particular the casting of tackle, depending on which reel is installed on the blank. This is what will be discussed now.

Why is it important to be able to cast a spinning tackle

Spinning mastery is an important skill that will surely bear fruit for everyone who possesses it. Every angler needs to be able to handle a spinning rod and know about some of the intricacies of operation. In this case, we are talking about casting. It is necessary to be able to cast a spinning rod correctly, since the success of the whole fishing depends on it. Correct casting allows you to deliver the bait to any promising fishing spot. Also, the correct casting of the bait allows you to protect the angler from injury, and the fishing rod from breakdowns, which has long been not a rarity with the advent of new types of reels, during the initial development of working with them.
Powerful reels require careful handling [/ caption] Proper handling of the tackle during casting will save the angler not only from material losses in the form of a broken rod or reel, but also prevent possible stress when untangling a beard on a reel or some other nightmare knot on the fishing line.

How to cast a spinning rod with an inertial reel correctly?

Casting a spinning rod with an inertial reel is not the easiest thing to do, which is not at all subject to every angler. The fact is that the inertial coil has a number of distinctive features and also requires special handling. Let’s take a look at the main pros and cons of this coil:

1. Simplicity of the mechanism.
2. Low price and availability.
3. The ability to fish out rather large fish without fear of breakage.

Now let’s move on to the cons:

1. Difficulty in use (in particular throwing, as well as handling it).
2. The need to get used to this tackle, as well as training in handling it.
3. The emergence of a beard from time to time on the reel, even for seasoned fishermen.

How to cast a spinning rod with an inertial reel so that there is no beard – video of the correct technique: https://youtu.be/NmP4FSaOb6A From all these statements it follows that casting a spinning rod with this type of reel requires training and accuracy. Although this reel is distinguished by its simplicity of operation and light weight, not everyone can use it for spinning fishing. Let’s consider the main ways of casting bait with this type of reels:

Side cast

Perhaps the side cast is the safest cast when using this type of reel. The thing is that the line will go off more smoothly with it than with the vertical one and the chance of creating a beard is small. For this casting, the rod is placed perpendicular to the surface, slightly raising the tip, 45-60 degrees from the water and then casting, gently releasing the previously clamped reel.
Side casting is suitable for casting and inertial and non-spinning reels [/ caption]

Pendulum throw

Unlike side casting, this one requires more skill and dexterity. However, everything is much simpler than it seems. In order to cast the bait with a “pendulum”, you need to release 45-90 cm of fishing line from the tip of the rod and position the rod vertically in the water, as in the case of vertical, classical casting. Then it is necessary to swing the bait with smooth movements and when the amplitude of its swing has reached its peak, release it to the intended place of fishing.

How to cast a spinning rod with a spinning reel correctly?

The spinning reel is the most versatile and popular reel at the moment. It is installed both on the feeder and on the spinning rod. Its distinctive features are ease of use, affordable price, as well as functionality in many types of fishing. It is recommended to learn how to cast a spinning rod with a spinning reel. Thus, not only the skill of owning a rod will arise, but also an initial understanding of the types of casts and the necessary basis for learning casts with other types of reels. Casting a spinning rod with a spinning reel – the right grip, choice of technique and slow motion video: https://youtu.be/4THVatIC_QM Let’s consider the main advantages of spinning reels:

1. Easy to use and operate.
2. Great variety on the market and reasonable prices.
3. Suitable for virtually any kind of fishing.

Consider the cons:

1. When it comes to catching very large fish, then not every spinning reel will be able to fit. In this case, preference should be given to the multiplier reel, which will be discussed later.
2. A spinning reel is heavier than a spinning reel and a baitcasting reel.
3. The drum holds less line than inertial and multiplier ones, and sometimes it is inferior in casting distance.

Despite the fact that there are many controversial points, the spinning reel is considered one of the best and holds a special place in the hearts of many anglers. Casting with its help is much easier to do, so we will consider the main types of casting:

Vertical casting

This is one of the most popular and simple types of casting. It is with a spinning reel that in most cases it is carried out safely and successfully.
Correct grip [/ caption] It allows you to very accurately deliver the bait to any place in the reservoir. In order to throw a spinning rod with the help of a vertical cast, you need to stand in front of the water, open the bow on the drum, conditionally outline the place of casting with your eyes and, after swinging the fishing rod behind your head, throw the tackle, releasing the fishing line previously clamped with your index finger. Then the bow is closed, and the spinning rod is installed on the stand.

Casting from behind the head of the spinning rod – the maximum casting distance of the bait

Another type of power cast is a cast from behind the head. It is based on a strong head swing and snatch. Both the vertical cast and the cast from behind the head are similar, however, they are distinguished by the fact that the second can be done not in an immobilized position. The whole body works here. You can connect your lower back, shoulders, and also take a couple of steps forward for better swing. This type of casting is used to cast the bait over very long distances, so one of the most important factors here is the strength and weight of the tackle.

How to cast a baitcasting reel correctly?

The baitcasting reel is a very difficult mechanism to use. It is mainly used by experienced anglers who know how to handle complex implements. https://tytkleva.net/lovlya-xishhnoj-ryby/spinning/komplektuyushhie-i-montazh/multiplikatornaya-katushka.htm Also, this type of reel is not recommended for beginners. In particular, baitcasting reels are used for fishing for very large fish. Let’s take a look at the main pros and cons of this coil. Pros:

1. Reliability and optimal weight.
2. Capacious drum.
3. The ability to make long casts.
4. Good sensitivity.

Minuses:

1. Inconvenient to operate.
2. Impractical and also uncomfortable on the hands.
3. Has quite high prices.
4. Requires certain skills from the owner.

How to fish with a baitcasting reel – correct casting and setting up a cartoon: https://youtu.be/cAj8_nIV1JA As you can see, this reel is not suitable for everyone, but it is in demand among fans of fishing for large fish. Basically, this coil is very similar to an inertial coil, except for the complex mechanism of operation. Casting with this type of reel is carried out, as well as with inertial, side, pendulum, as well as fly fishing, if the tackle is not too heavy. You can
cast a spinning rod with a baitcasting reel using fly fishing technique [/ caption]

Castings in difficult conditions

Consider what types of casts will help the angler in different fishing conditions:

1. When fishing upwind, you need to understand that the trajectory of the tackle will not be as accurate. It is recommended to have a fairly weighty rig, which is unlikely to be strongly influenced by the wind. The ideal type of casting here will be a cast from behind the head or a vertical, classic cast. A heavy load, as well as the right amount of applied force when casting, will provide decent wind resistance and the bait will be thrown where it was supposed to. Stages of work with a spool and a line [/ caption]
2. When fishing across the wind, no special recommendations are required. However, it is worth noting that a light bait is also suitable for this type of fishing, because when casting it will fly with the wind, and this must be taken into account. Thus, you do not need to apply special forces for casting.
3. Casting from under bushes or trees, or in conditions where there is little space, must be done very carefully. Since the angler has nowhere to turn around, and behind there are trees that interfere with many types of casts, the ideal option would be to cast with a pendulum and cast with a catapult. These types of casting do not require you to erect the rod for yourself. It is enough to place it in front of you and use the swing to make a cast. However, this technique does not allow you to throw the bait over long distances.

Casting spinning tackle in difficult conditions can be done from under the arm – side impact [/ caption]

How to make a long cast?

In order to make a long cast, several factors must be taken into account.

1. You need to have a strong and reliable tackle that can withstand a weighty bait.
2. The tackle to be thrown must be powerful. In most cases, a powerful tackle will allow you to throw the bait further, but this requires a good reel and line, as well as skill.
3. Wind, vegetation interfering with casting should be absent. You should also cast from a firm and level surface.
4. You need to train and be able to cast from behind the head and vertical cast, because it is these power casts that will help deliver the bait as far as possible.

How to make a power casting of a spinning tackle – technique [/ caption]

Common mistakes beginners and advice to them

Probably every fisherman has ever been completely inexperienced and made some mistakes. Here are some basic tips for newbies to help them avoid a lot of mistakes.

1. It is always necessary to check the tackle . Particular attention should be paid to the fishing line, reel and rod, because these parts of the fishing rod are the main ones and will not be replaced on fishing “in a quick way” like the same hook or spinner.
2. When casting, be guided by the tip of the rod or by objects on the opposite bank. For example, if you have chosen a place on the water where you want to send your bait, and its direction coincided with some tree or bush located on the opposite bank, then casting will be much easier. Focus on this subject and the cast will come out more accurately.
3. When casting from a boat, you need to be extremely careful . A more convenient casting option would be a vertical casting while sitting or casting with a pendulum if the fishing spot is not so far away. Carefulness when fishing from a boat is incredibly important, as with a careless swing, the tackle can catch on the boat or the fisherman himself can find himself overboard without calculating the swing force.
4. It is recommended to learn different types of casting in spacious areas that do not have extraneous vegetation, power lines or other objects that interfere with this. A wide field or a spacious reservoir would be an excellent option. Some anglers learn to cast a spinning rod directly on the sea, because it is good to train the casting distance there.
5. You should start fishing with simpler gear . In this case, a non-heavy spinning rod with a length of 1.8-2.5 meters and a spinning reel is a beginner’s best friend.
6. It should be remembered that many spinners, jig heads, silicone fish and wobblers have less weight than the same donkey equipment in the form of a feeder or load, therefore they will fly over shorter distances. You should not look for the fault in the rod and reel and try more complex fishing tools to cast far.
7. There is no need to chase scales and huge fish if the simplest tackle has not been mastered before.

Fishing is an incredible pleasure that is available to everyone. The angler decides which tackle to choose, but the use of each tackle requires experience, which arises only as a result of persistent learning.

Поделиться ссылкой: