Ryobi reels are highly respected by anglers. Low cost, reliability and power – these are the components of the popularity of these devices. The Ryobi Excia 2000 is ideal for light to medium-heavy lures in a wide variety of ways.
Ryobi reels – quality and affordability two in one
Today, the range of spinning reels is so great that the angler’s eyes run wide. You can buy a Chinese reel with an incomprehensible name for 300 rubles, or Shimano Stella or Daiwa Exist at exorbitant prices. But you always want to find a reasonable compromise, i.e. product with an optimal price / quality ratio. And then the angler’s gaze stops on Ryobi reels that meet all the necessary requirements.
Interesting fact! As you know, ball bearings are installed on both sides of the drive gear, but since the vast majority of anglers are right-handed and it is natural for them to use reels with a left-hand handle arrangement, the size of the bearing on the left side is significantly larger than that installed on the right.
In order not to experience problems with the occurrence of loops during casts and to make casts as long as possible, the line or cord must fit on the spool evenly and accurately. The turns of the line or line must not fall one under the other. Ryobi reels use an endless screw mechanism, which allows cross-winding of line or cord. To increase the softness of the stroke, ball bearings are installed at both ends of the “endless”.
The minimum number of bearings required for normal coil operation is four — one in the rotor, two on the main gear bearings and one on the line roller. Having more bearings in the right places, namely where the rotating parts come into contact, will improve the performance of the reel.
The reel body has two functions: it provides strength and gives it an attractive design. Ryobi’s company came to the decision to make the cases from magnesium alloy. They are made by injection molding. Such housings are extremely durable, resistant to various damages, in addition, they do not have parasitic vibrations during operation. The engineers and technicians used a backlash-free technology for installing bearings in the housing, which increased the trouble-free operation of the coils by almost an order of magnitude.
The side of the spool, like the line guide roller, is coated with titanium nitride, which makes it easier for the line to come off the line and the casting is more distant.
Ryobi Excia 2000 reel
Currently anglers use two series of reels – the old Excia 2000 and the new Excia MX 2000. The first has the following characteristics:
- friction clutch – front;
- class – light, medium-light;
- maximum tractive effort on the friction clutch – 6 kg;
- weight – 290 g;
- line capacity of the spool – 155 meters of monofilament line with a diameter of 0.2 mm;
- the amount of line wound on the spool in one turn of the spool handle;
- gear ratio – 4.9: 1.
Many anglers still fish with this model, but you can buy it, perhaps, only on the secondary market.
Ryobi Excia MX 2000 reel
This reel has a number of advantages over the old model, which are expressed in the following:
- in this reel, the main gear is made of aluminum, the rotor gear is made of brass, the parasitic “infinity” gear is made of plastic;
- All ball bearings are sealed , which completely protects them from dirt. 2 of them are located on the main gear, 1 – on the rotor gear, 2 – on the endless screw, 1 – in the roller of the line stacker, 1 – in the knob of the handle and 1 in the spool;
- the overrunning clutch, which ensures the operation of the backstop, is made in the form of a cage with rollers and a stainless steel casing. It is believed that overrunning clutches in Shimano reels, made according to a different principle, are more reliable;
- The spool is made of cold forged aluminum. Despite the perforations, it is quite heavy. The friction brake mechanism contains three felt pads;
Ideal laying of both fishing line and braids is a feature of Ryobi Axia [/ caption] - the hollow bow and the line guide roller are made with high quality.
Attention! According to specialists involved in the service and repair of coils, this unit requires constant preventive maintenance, involving the removal of dirt and grease. In the presence of high-quality lubricants, this operation is easy to perform on your own.
The characteristics of the Ryobi Excia MX 2000 coil are as follows:
- friction clutch – front;
- class – light, medium-light;
- tractive effort on the clutch – 6 kg (according to other sources 6.9 kg);
- weight – 285 g;
- line capacity of the spool – 200 meters of monofilament with a thickness of 0.2 mm;
- number of ball bearings – 8;
- roller bearing – 1;
- gear ratio – 4.9: 1;
- cost – from 4.2 thousand rubles.
Advantages and disadvantages of the Ryobi Excia MX 2000 coil
This coil has the following advantages:
- smooth running;
- exceptional power;
- indestructibility;
- perfectly even winding of a fishing line or cord on a spool;
- interesting design;
- the presence of an additional bearing in the freewheel;
- the ability to fine-tune the clutch in just four turns;
- low price.
The disadvantages are traditionally considered a relatively large weight and the lack of a spare spool.
Important! Exii’s design flaw is considered to be a clutch nut located too high, which is why sometimes the line begins to wind not on the spool, but on the central axis. This defect can be eliminated in services that provide maintenance of fishing reels.
Where to buy a reel
Currently, this coil is not in short supply. It can be bought in fishing shops, and in those regions where the assortment in retail outlets is scarce, order on one or another Internet resource. Ryobi Excia MX 2000 spinning reel review, TO + look inside the mechanism: https://youtu.be/1v579dDStrA
The fisherman reviews the Ryobi Excia MX 2000 reel – practical experience of use
Oddly enough, it is on this model that there are not much more positive reviews than negative ones. For some, it does not drop loops, for others it does it regularly. True, all anglers fish with different braids. The thicker and stiffer the cord, the less likely it is to drop the loops. For some, backlashes appear almost immediately after purchase, while for others, even after several years of operation, they are practically invisible. Many people note that the noiselessness of the device is greatly exaggerated. Some anglers, despite the manufacturer’s assurances, are unable to perform long-distance casting, however, they do not write what lures they use. Almost everyone agrees that the reel is powerful enough that forced fishing in difficult conditions does not harm it. Some anglers point out the manufacturer’s false information about certain characteristics of the product.One of them measured the length of the line wound on the spool in one turn of the reel handle, and found that it was much less than that indicated in the description. Another thought of having a bite on the bow, and found that it was not hollow, but whole. It is also possible to refine Ryobi Excia MX 2000: https://youtu.be/bVRcn0OyBgk In general, we can say that it is almost impossible to buy something more perfect for such a price. Therefore, you should more often do prevention and, if you don’t like something, bring the coil to mind on your own or, resorting to the services of specialists.be / bVRcn0OyBgk In general, we can say that it is almost impossible to buy something more perfect for such a price. Therefore, you should more often do prevention and, if you don’t like something, bring the coil to mind on your own or, resorting to the services of specialists.be / bVRcn0OyBgk In general, we can say that it is almost impossible to buy something more perfect for such a price. Therefore, you should more often do prevention and, if you don’t like something, bring the coil to mind on your own or, resorting to the services of specialists.