How to choose and make a titanium leash with your own hands – instructions with a photo

What is a titanium leash and what its features are – it will be interesting to know a novice angler and not only. A correctly chosen leash will largely determine your fishing success. Some consider relative invisibility to be the most important property. However, sometimes the strength of the tooling is the defining feature. Titanium leashes are one of the most modern types of such equipment.
This material is known for its strength and lightness. If you bend it and then release it, it will always disperse easily. Titanium is stable when the fish has teeth. This applies, for example, to pike, zander or catfish. It is not exposed to the teeth. Therefore, such leashes can be used for a long time. When fishing medium to large specimens, there are usually several options for choosing leads. However, where it cannot be ruled out that a pike will bite, it is more profitable to use a titanium base for materials. In this case, the fisherman can be sure that the predator will not be able to gnaw through the leash.

When is it appropriate to use titanium leashes?

Using a titanium leash is beneficial when fishing for pike. She will not be able to gnaw him. If the leash is made of other materials, this will increase the risk that the fish may get off the hook.

Titanium leash, due to its flexibility, is appropriate to use when fishing with lures, jig lures, wobblers, rolls and shads.

Titanium leads can be used without maintenance. They do not oxidize, do not remember their shape. Therefore, when fishing, they can be used at any convenient time. When fishing with wobblers, they allow you to act without changing the buoyancy of the tackle. If the wobblers are floating, then everything will remain the same with this leash, without changing the buoyancy of the lures, if the leash is no more than 10-15 cm long. In the case of a slowly sinking bait, when using a titanium leash, they will also retain this property.

Titanium properties, pros and cons

When using titanium leads, you need to consider its strengths or weaknesses. As advantages, the following features of titanium can be considered as the basis for leaders:

1. The fish will not be able to gnaw such a leash . This property is especially important, for example, when fishing for pike.
2. It has no memory – no matter how bent or twisted, it will fully accelerate if released.
3. Tackle made of titanium is strong and durable .
4. The use of such metal makes the leash very lightweight . This, in particular, facilitates the use of a variety of game options when fishing.
5. Titanium leashes do not oxidize and do not require careful maintenance .

Titanium leads have the following advantages [/ caption] Titanium lead and pike – how to make a titanium lead with your own hands: https://youtu.be/qpYvBu2rdn8 When use must also take into account their disadvantages:

1. These leashes are clearly visible in the water.
2. When using them, the rigidity of the material is felt.
3. Rupture is possible with hooks.
4. When fishing with live bait, the rigidity of the leash degrades the quality of the game.

Titanium wires are relatively expensive, which limits their distribution.

Since this material is tough, it cannot be twisted. Usually, when bent, the tip is secured using a metal tube. Shrink sleeves may work as well, but they will gradually wear out and eventually need to be replaced.
Titanium leash purchased from Bigulov [/ caption]

Titanium leash material

When buying titanium wires, you need to pay attention to the presence of carabiners at its ends. Some manufacturers put them on both sides, while others only put them on one side. If fishing occurs with the use of lures, then usually larger carabiners are used. For wobblers, many people prefer to take more miniature ones.

When buying, you need to distinguish between titanium material and one that is made of an alloy of steel with titanium. The first is not deformed by pike teeth, and the second will gradually lose its quality.

How to make a titanium spinning leash

A titanium leash can be made by hand. To do this, you will need to prepare the following:

1. Pliers are required to work with the material. You can also use round nose pliers for this. You will also need a second of the same tool.
2. A titanium material that will serve as a raw material for the manufacture of tooling.
3. Clasps and swivels are required to attach to a main line or hook. Clasps and knotless fasteners on titanium material on titanium leash [/ caption]
4. Crimping tubes will allow you to fix the ends in order to create loops.

To make a leash, you need to do the following:

1. Cut titanium material to a suitable length.
2. They put a tube on it.
3. The tip is passed through the clasp and inserted into it. This can be done directly or by pre-tying the wire into a knot. In the latter case, a simple knot is made, tightened so that a loop with a diameter of 2-3 mm remains. After that, the tip is threaded into it and then into the tube.
4. If the diameter of the tube is less than twice the thickness of the titanium wire, then the wires will not be able to pass into the tube a second time. In this case, the situation can be corrected by making the hole oval with pliers.
5. The tube is carefully squeezed using a tool prepared in advance. Some do it in one plane, others do it twice in perpendicular ones. Tool for making titanium leads [/ caption]
6. Twisting is in progress. To do this, I press the loop with some pliers, with the other – the opposite end of the tube. Then the first are rotated relative to the second.
7. The protruding end of the titanium wire is cut off.
8. These operations are performed for the other end of the leash. However, the swivel is attached, not the clasp.

DIY titanium leash – step by step photo instruction [/ caption] Now the titanium leash can be used for fishing. With the help of a clasp, the rig is attached to the main line, and the swivel is used to attach the hook and bait.

The twisting will increase the strength of the loop. However, at the same time, the place where the tube ends and only titanium material goes further becomes vulnerable to rupture. This is due to the fact that in this place the rigidity changes abruptly.

Some anglers secure the ends without using a crimp tube. This can be done, for example, in the following way. The bent tip of the leash is wound with a thread. Then the connection is fastened with high-quality glue. In some cases, when fastened in a tube, the titanium wire is not twisted, but only squeezed with pliers. In this case, the tensile strength will be slightly lower due to the higher risk that the loop will open. How to make a titanium leash and which one is more reliable on crimp tubes or braids – video instruction: https://youtu.be/-WLndyS7yPk

Titanium pike leash

Fishing for pike is usually fun for the fisherman, as it requires demonstrating all your skills and abilities. This predator lives in hard-to-reach places, so to catch it you need not only knowledge of the reservoir, but also luck.
Pike teeth are strong enough. They allow not only gnawing the monofilament, but also
fluorocarbonor braid. Steel leashes save the situation, but a predator can deform them even after one bite so much that for further fishing the leash can only be replaced. The use of titanium material makes a big difference. It does not deform after bites and contact with underwater obstacles. Therefore, the use of such a leash is preferable, despite its higher price. When choosing a length, it is necessary that it is not too short. So that there are no overlaps for the main line or cord when twitching minnow wobblers. But a leash that is too long can overlap with the main line. The optimal leash length is 15-20 cm.

Titanium leash for ultralight

High strength combined with relatively low weight make these leads popular for ultralight fishing. At the same time, fishermen have several points of view on the use of this material:

1. If the bait does not exceed 5-8 grams in weight, then a bite of a medium-large pike is not expected. Therefore, the fisherman can refrain from using high-quality, but expensive titanium material.
2. Some are repelled by the visibility of such a leash and its rigidity. This reduces stealth and degrades the play of small bait.

The use of such a leash allows you to gain more confidence, in particular, in cases where a pike can swallow the bait. Several options for making ultralight rigs with a titanium leader: https://youtu.be/sa1wseH65aY

Best Titanium Leaders – Purchased Materials

The use of titanium leads is relatively expensive, but has its undoubted advantages. If a fisherman expects to catch a pike, then using it allows you to be sure that the leash will not fail at the right time.

AFW Titanium Toothproof Blackoxide

This driver material has high strength despite its low thickness. When deformed, it quickly returns to its original state and becomes ready for use again. Using this material allows you to feel confident in your tackle.

Leash Stinger

The use of such a leash is insensitive to numerous bends and twists. After that, it does not lose its properties and can be fully used. The leashes are 20-25 cm long and can withstand loads of up to 12-18 kg, depending on the specific variety.

GS Titanium

Leashes can be from 15 to 25 cm in length. Thickness from 0.3 to 0.5 mm. Depending on the type, the maximum permissible breaking load is 10 to 20 kg. It is determined by the thickness of the titanium material used. When fishing with these leashes, you can be sure that the pike, once caught on the hook, will not damage the tackle.

Jerk leashes

When using titanium jerk leads, it is important to ensure that the following conditions are met:

1. Be resistant to pike teeth.
2. Provide a secure attachment of the bait.
3. Make attractive bait play possible.

Titanium leash for jerkbaits [/ caption] Titanium leash meets all these requirements. However, when using it, attention must be paid to the strength of the attachment of the bait. When jerking, there is a significant load in this place. The use of a titanium jerk leader is optimal for medium to heavy tackle loads.

Поделиться ссылкой: