Rigging drop shot for pike: methods and schemes of installation with a photo, supply and wiring

A drop-shot rig can be made on the main line or on a separate piece of cord or mono line (in this case it will be a variant of a drop-shot – a diverter
lead ).
Diverter and drop shot [/ caption] In the latter case, you will need to attach it through the swivel system before fishing. During such fishing, the hook is tied to a fluor fishing line in the form of a leash. To do this, use a knot that ensures that the hook is at right angles to the fishing line.
Drop-shot rig [/ caption] A sinker is attached at the very end of the rig. When cast, it reaches the bottom and remains motionless during fishing. This tackle is most effective when the line is vertical or at a slight angle to the bottom. An important feature of such fishing is that there is no need to make frequent casts. Even if the lead stays in the same place for a long time, the fisherman can attract predatory fish, ensuring that the bait plays in a vertical plane.
Installation of a classic drop-shot for pike fishing [/ caption]

When to use the pike drop shot rig

The use of a drop shot tackle
when fishing for pike is effective throughout the year in open water. It shows good results both on a flat bottom, and on muddy, or zagorozhennye. Fishing for pike with a rig should be carried out near the following places:

1. The brow is at the bottom . Pikes are often hunted from its deeper side.
2. Places with dense bottom vegetation . Then the stick sinker pushes through the bottom vegetation, and the bait goes over it.
3. The bottom, where there are snags or stones , on which ordinary tackle can catch on.
4. Rolls and shallows, when fishing at dawn .

For fishing in deep places, it is convenient to use a heavier sinker.

How to mount a drop shot on a pike

To tie a drop-shot rig yourself, you will need to prepare a leash, sinker, hook and bait, for working installation they must meet the following requirements:

1. It is better to use a steel leash for pike fishing. In this case, you can be sure that the predator will not gnaw it. The use of fluorocarbon is allowed . Its invisibility in the water will allow you to more effectively attract pike. The length of the leash can be from 10 to 80 cm.
2. You can use both regular and offset crochet hooks . For a drop shot, it is customary to use only single options. Hooks are chosen so that they match the characteristics of the bait used .
3. Sinkers can be used in various ways, but the most effective is considered to be an elongated one, in the form of a very elongated drop or a propelled stick. This is because it is less likely to get stuck on a tight bottom. Drop shot sinkers with built-in swivel [/ caption]
4. Various types of silicone lures are used for pike fishing .

Dropshot mounting can be done in two ways, depending on the line / line used. If a fluorocarbon line is taken
, then the equipment is made as follows:

1. Take a piece of fluorocarbon up to 1 m long. In the middle part, a hook is tied with a Palomar knot . After the knot is tightened, the hook will be perpendicular to the line.
2. A sinker is attached to the end of the fluor.
3. The other edge is attached to the main line. For this it is convenient to use the “Loop to loop” option.
4. The selected bait is attached to the hook. Usually for a drop shot, one of the varieties of silicone is used.

Installation of a drop shot with a sinker on fluorocarbon [/ caption] When using metal leads, the tackle is made in this way:

1. You will need two copies of metal leads. Loops are made on each of them, and the ends are twisted around the main part.
2. The loop of the first metal leash is hooked onto the hook with the bait.
3. A loop of the second leash is threaded into it.
4. A sinker is attached to the second side.
5. The beginning of the first leash is attached to the main line.

A metal leash in a drop-shot rig is an important part of installation when fishing for pike [/ caption] Features of mounting a drop-shot rig and the process of pike fishing on video: https://youtu.be/Cc0zPkeP-J0 A pike cannot gnaw such a tackle. There are such mounting options when thick fluorocarbon is used instead of the lower metal leash. DIY Drop Shot Rig: https://youtu.be/eOw5kcHZmtI

Choice of baits

For a drop shot, silicone baits of various types are usually used. We can talk, for example, about the following types:

1. Made from edible rubber.
2. Vibrating tails.
3. Silicone worms.
4. Slags.
5. Twisters.

The size is chosen depending on the specific conditions of fishing. In practice, pike fishing is chosen so that it is at least two inches long. It is allowed to use dead fish as bait, but it is used in rare cases.
Lures for a drop shot [/ caption]

TOP 10 best lures for catching pike with a drop shot

Crazy Fish Scalp Minnow

This bait is made from edible rubber. The elongated ribbed silicone shape that resembles a torpedo will help increase your catch of pike or other fish. Although this lure is similar to some other similar vibro-tails, it is nevertheless in significant demand and has a good reputation among fishermen.

Lucky john tioga

This bait combines high quality and affordable price. It is considered to be one of the most catchy variants of the shallow vibrotails. The body resembles a small fish. The tail snout is used to improve the lure’s play. Lures are available in various colors. The fisherman will have to choose the most catchy ones. The effective form is combined with the fact that this bait is edible.

Reins Bubbring Shad 3

The bait has an elongated shape, which consists of two parts of different thickness. She is able to show good play even with light spinning movements. The lure has a deep transverse relief. The flat part of the tail contributes to the occurrence of sharp and frequent oscillations.

Akkoi Gentle Killer 70

This lure has a large ribbed body. Helps to make the game attractive to predatory fish. Food grade silicone was used in the manufacture of this product.

Lucky John Long 107

The body is elongated. The outlines are made in such a way as to provide medium-amplitude play. The tail creates low frequency vibrations.

Reins G-Tail Saturn 3.5

This lure uses an L-shaped tail. It is needed in order to create an aggressive game that attracts predatory fish. Visually, the product resembles a worm.

Lucky John Mister Greedy 76

In the manufacture, the material Scent & Taste Inside was used, which is edible, has a pleasant taste and an attractive aroma for predatory fish. The penny provides intense play. Body and tail vibrations can be seen by a predator from a great distance.

Keitech Easy Shiner 3

This bait has a flattened body. It is combined with a large flat tail. This shape allows for a sharp game with a large amplitude.

Akkoi Smart 80

This product perfectly copies the way a small and fast fish behaves. The elongated body and flat tail allow it to work well at depth. Rubber contains an attractant in its composition, which helps to attract fish.

Reins Rockvibe Grub 4

Slug in its shape is simultaneously similar to a fish and a worm. The lure has many large ribs, which provides strong vibrations. Provides mid-range and low-amplitude play.

How to catch pike with a drop shot: postings, feed tactics, search

They start fishing by looking for a promising place. Typical pike stands on the river:
When fishing with a drop shot, they first cast the bait. Then they wait until the sinker touches the bottom. After that, you need to carefully select the slack in the line. For fishing it is necessary to ensure the game of the bait. For this, the movements of the rod are used. Most often, the following game options are chosen:

1. They make small and frequent jerks with pauses between them. Often, predatory fish bite when the bait slows down.
2. Short braces are performed.
3. Make elongated and smooth movements. The pike can be attracted by slow movements without jerking.

Animation of a drop-shot rig when fishing for a pike [/ caption] How to catch a pike with a drop-shot rig in autumn in November – video from fishing: https: // youtu .be / ImnK3lW6Sic The type of game used is determined by the preferences of the fish. The most effective option is usually determined in practice. A prerequisite for performing movements is that the load at this time must remain in the same place.

Pros and cons

It is believed that using a drop shot has the following advantages:

1. If a predatory fish is passive, such a tackle becomes very attractive to it.
2. The drop shot is very sensitive and clearly conveys fish bumps, bottom touches and vegetation.
3. When taking a bite, the fish practically does not feel resistance, so it strives to grab the entire tackle.

This tackle has several disadvantages:

1. Long casts are ineffective.
2. Pike in the active period rarely pays attention to this tackle, preferring wobblers , spinners .

One of the handy features of a drop shot is the ability to avoid making frequent casts. A lure that wobbles due to small movements of the water can be a tasty morsel for a predator for a long time in one place or with short movements. Drop shot – shooting underwater: https://youtu.be/nJf3AMtJnWo

Tips and Secrets

It is advantageous to use special weights for a drop shot. Their peculiarity is that they have a special mount that can be moved along the leash. Thus, you can change the distance to the hook and set the depth of the bait. The most effective dropshot fishing for pike will be in the spring or autumn. However, this tackle can be used at other times of the year.
Although the classic version of the tackle provides for only one hook with a bait, some fishermen can install up to 4 hooks on the line. Sometimes such a tackle can become more effective.

Поделиться ссылкой: