In the arsenal of fishermen there are a large number of types of tackle. Some of them are designed for specific fishing conditions, others are almost universal. The last category is the drop shot, the use of which is gaining more and more popularity.
What is a drop-shot rig, description and photo
Initially, the drop shot tackle was created in order to fish from a boat or from a steep bank. It is often used for steep fishing. Gradually, this tackle became more and more common. Now it is also used for fishing from the shore. The key feature of the rig is that the hook is attached directly to the line. Below it is a sinker. In a drop shot, a leash is not used at all, as such. That is, the leash is, as it were, part of the tackle, which can be either integral when fishing for perch, and on a fluorocarbon basis when fishing for the same perch or
pike perch , or with a steel twist when fishing for pike.
A metal leash in a drop shot rig is an important part of mounting when fishing for pike [/ caption] For a perch, a drop shot is mounted
on a flute [/ caption]
Rigging drop shot when fishing for pike perch or perch can be directly on flute or monofilament [/ caption] Sometimes the hook is attached to the main line. And in some cases, it is made on a separate piece, which is then attached to the main line / cord, in which case the name of the rig is a diverter leash. Diverter and drop shot [/ caption] The distance from the sinker to the hook ranges from 0.3 to 1.0 m.
When used, pros and cons
A drop shot does not require frequent re-throws, especially when fishing in the current, you can throw only once and leave it under water constantly playing with the bait and releasing it again downstream. A sinker at the bottom will allow you to fix the line, and the bait will play all this time under the influence of the movements of the water. This method is especially effective in cases where the reservoir is rich in medium and small predators. Although this rig can be used for casting casting, it works best when used vertically or when fishing from a steep bank. The tackle is considered less effective at shallow, medium depths, as well as in strong currents, however, some people use a drop shot even in these conditions.
It is convenient to catch a drop shot from the shore if it is steep and the deep coastal edge begins [/ caption] The advantages of the tackle are as follows:
- The fish does not feel the weight of the sinker when biting. This contributes to the fact that they will attack the bait with greater efficiency. And do not let go of her after the grip.
- You can fish with a drop shot wherever the angle of the line is at least 45 degrees in relation to the surface of the water.
- The rig is mainly intended for catching predatory fish, but it can also be used to catch peaceful fish.
- When fishing, you can use most types of silicone baits.
- Ease of installation, makes the tackle affordable even for inexperienced anglers.
- Drop shot can be used for fishing at any time of the year.
- The tackle is suitable for fishing on an overgrown or tight bottom.
- The game uses the bait in one place, which simplifies the process of fishing for passive fish.
The disadvantages of using this tackle are:
- Ineffectiveness of application at shallow and medium depths.
- The tackle is difficult to use where there is a strong current.
This tackle has shown its effectiveness and high applicability in various situations. Thanks to this, the popularity of this method of fishing is constantly growing. What is a drop-shot, application and editing features, 5 common mistakes: https://youtu.be/cGvKQ6quLEY
What you need to mount the equipment
To install the tackle, you need the following:
- fishing line;
- hooks; Drop shot hooks [/ caption]
- sinkers;
- bait.
When choosing them, you need to take into account the following:
- For this tackle, the most suitable option is the use of fluorocarbon due to its high strength and stealth. For trophy specimens, it is better to take a line with a thickness of 0.3 mm. In other cases, in most situations, 0.20-0.25 mm can be used.
- The use of a monofilament line is also common . In this case, the preferred thickness will be 0.14-0.25 mm. The lower limit for perch and peaceful fish, higher for pike perch fishing.
- If you are fishing on a rocky or overgrown bottom, you should take an offset hook . On a clean bottom, a single hook with a long shank and a large ear shows good results . It is worth paying attention to special hooks for a drop shot, which are able to fix the bait in the most favorable position. However, they are relatively expensive and are less common on the market. When attaching the hook, it is recommended to maintain an angle with the line equal to 80-90 degrees. Offsets [/ caption]
- Sinkers can be used in various types. Sinkers with an elongated elongated shape are considered the most effective. They are preferable because they sink quickly and easily pass through the algae. In clean areas, the use of “drop” or “cheburashka” weights is common. The weight of the sinkers is usually in the range of 5-30 grams. Most often they are used with a weight of 5-14 grams. Dropshot weights with clamps pass rocky ridges well and shoot if they get stuck [/ caption]
- Most often used as bait are banded vibro-tails, worms, slugs – silicone products in the form of worms or small fish. When attached to the line, they will move, attracting prey. The bait should not be too large and heavy. Usually choose those that are 2 to 4 inches long. Again – for smaller perch, for pike perch and pike – more. Vibrating tails, twisters, flies or fish made of foam rubber are also used as baits. Good results are shown using live worms or pieces from the belly of caught fish.
What lures are used when fishing with a drop-shot:
How to make a montage
To make the installation, you need to follow these steps:
- You need to cut a piece of fishing line 1 meter long. For the manufacture of a drop shot, fluorocarbon or monofilament fishing line is usually used.
- A sinker must be attached to one end. It is more convenient to use one that has a clip. It can be moved by choosing a suitable hook distance.
- At a distance of 30-70 cm, at the choice of the fisherman, a hook is fixed. It must be attached in such a way that it is perpendicular to the line. The Palomar knot is often used to attach it . It allows you to securely fix the hook at an angle of 90 degrees to the line. The size of the hook must match the size of the bait.
- The upper end of the tackle is attached to the main cord. This can be done, for example, using the Carrot knot or by using a swivel.
- A suitable bait is placed on the hook.
It is not difficult to create a drop shot montage. In order to get ready for fishing, you can prepare a few pieces in advance or tie the tackle directly on the spot where the fishing will take place.
It is difficult to advise in advance how much distance should be between the lead and the hook. The fisherman, in order to find the best option for a particular reservoir, must experiment. A classic version was given here, but in practice others can also be applied. For example, you can apply the following changes:
- When fishing with a drop shot, the hook with the bait is placed on the line. There is also an option when there may be an additional hook attached, which is attached along with the sinker. This option is usually used in reservoirs where there is no current.
- You can attach not one hook with bait to the fishing line, but two or more. This method will allow not only to increase the catch, but also to find out at what depth the fish bite better.
The Palomar knot, which is used to attach the hook, is done as follows:
- The end of the fishing line is folded in half and threaded into the eye of the hook.
- A simple loop is made so that the eye of the hook is inside it.
- I thread the hook through the double tip. Tighten the knot.
- One of the two threads is pulled through the eye of the hook.
The knot knitting process is shown in detail in the following figure:
Details about the drop-shot rig – fishing in the current from the shore, tactics and wiring, installation, knots and other nuances of application: https://youtu.be/btP8U_XQLzA
Where and how to catch a drop shot, animation, technique and tactics
You can use a drop shot under the following conditions:
- At the edge at the bottom of the reservoir.
- In places of rifts.
- Where there are holes at the bottom.
- The drop shot is effective in those places where the bottom is heavily overgrown with algae.
- Such tackle can be used in tight places.
- On a rocky bottom when fishing for walleye.
- It is used in silted areas. When the lead hits the bottom, a cloud of turbidity rises, which can sometimes attract fish.
Various types of wiring can be used with this tackle. The choice depends on the specific conditions of fishing. The vertical component of the movements is important. It usually includes light tossing loads and baits.
Animation of a drop shot rig when fishing for pike, perch, zander [/ caption] When fishing in reservoirs where there is no current, it is important to pay attention to the game of the bait. Fishing takes place in this way:
- The sinker should sink to the bottom. The touch point can be determined by observing the movement of the rod tip.
- The line is slightly loosened, making sure that it is not pulled into the string.
- With the help of light and sharp tension, the bait is slightly thrown upwards. During this movement, make sure that the lead remains at the bottom.
- The stretched line and the correct installation of the tackle will ensure a strictly horizontal position of the bait.
- After a while, the line is slightly weakened again, then the movement described earlier is repeated.
If there are no bites or there are too few of them, you need to move to a new place. To do this, the line is pulled, lifting the sinker, then the tackle is moved to a new position. It is convenient to catch the nearest places by fanning.
A drop shot rig works on a long distance for demolition when fishery fishing a reservoir from the shore [/ caption] Although fishing in a strong current with a drop shot is less widespread, nevertheless less, some prefer to use this option. In this case, the fishing tactics are as follows:
- The rig is thrown closer to the opposite bank of the river.
- After a short pause, with small and rare jerks, it is pulled to itself.
- Release the tension between jerks. This allows the bait to move in such a way that it looks like a weakened small fish that looks very attractive to predatory fish.
After one place is fished, you need to move to another site. Usually, the fisherman will first examine the surrounding area. If a place was found where there are a lot of fish and good biting occurs, then it makes sense to focus your efforts on it.
Catching perch
For perch fishing, you can effectively use an
ultralight rod . For this, a rod with a test in the region of 2-8 grams is suitable. A light form with a 12-gram dough will also work. The size of the fish depends on the size of the bait. If it is relatively large, then it will not work for small specimens. For fishing, you can use silicone lures in the form of worms, as well as twisters:
Experimenting with the size of the bait is required to increase the chances of a perch biting. A correctly selected option will increase the catch. The game consists of vertical jerks and pauses between them. In this case, it is necessary that the load lies motionless on the bottom during movements. Another way to play when fishing for perch is to either loosen the tension of the tackle or increase it with the movements of the rod. This can be done, for example, by moving the rod tip to the right and then to the left. https://tytkleva.net/lovlya-xishhnoj-ryby/spinning/strategiya-i-taktika/drop-shot-na-okunya.htm Fishing with a drop shot from a boat, wiring, animation and bait – video from the pond: https://tytkleva.net/lovlya-xishhnoj-ryby/spinning/strategiya-i-taktika/drop-shot-na-okunya.htm //youtu.be/IeBXrnNolIE
Fishing for pike with dropshot rig
When fishing for pike, you need to take into account that it is able to gnaw through the line. Therefore, it is recommended to use a metal leash, which she cannot eat. One of the catchy options for pike rig is as follows:
- You need to prepare a string leash.
- One of the twists needs to be untwisted.
- A hook and a bait are fixed on the twist.
- The fisherman now has a lure attached to a metal leash.
- A second metal leash is attached to the loop of the first twist through its twist.
- A sinker is required to be attached to the second end of the second strand.
Now the following design has been created: The
second leash does not actually participate in pike fishing and can, at the request of the fisherman, be replaced, for example, with a fluorocarbon one. https://tytkleva.net/lovlya-xishhnoj-ryby/spinning/strategiya-i-taktika/drop-shot-na-shhuku.htm
Catching walleye
Zander is a bottom fish, so the drop shot is widely used for catching it. Good sharpening of the hook used is essential. This is due to the fact that the mouth of this fish is bony, and an insufficiently sharp hook cannot pierce it. Stepped wiring shows good results. Playing with bait doesn’t have to look energetic. Wiring is also used, in which the load is dragged along the bottom.
For this fish, baits with a narrow shape will be most effective. This is due to the fact that the pike perch has a relatively narrow throat. When fishing, they use twisters with forked tails, silicone slugs, octopuses. It is recommended that you choose those made with edible rubber. Foam fish are also used. The size of the baits should be 3-7 cm. – video from the pond: https://youtu.be/nJf3AMtJnWo
Tips and Secrets
Perch or pike perch require more active tracking than pike. She prefers a smoother and more relaxed game of bait. To get a good catch, the vertical component of the game is important. It should be carried out with pauses. Usually, the bite does not occur when moving, but during a stop. It is important to constantly change the sequence of movements. The same game loses its appeal to fish over time.
Спасибо, обязательно буду пробовать!