How to choose the best pike wobblers for trolling: model selection

Before choosing catchy wobblers for pike trolling, you need to figure out exactly where it is worth trolling on the pond when catching a toothy predator.
To find a place where you can find a pike, proceed as follows:

1. They start fishing from the deepest areas . Lures are guided along the bottom, paying particular attention to the edges.
2. You need to try to fish for junctions, where great depth begins . In these places, the pike loves to hunt. It is necessary to make several attempts, approaching from the side of a deeper section.
3. It makes sense to walk along the edges of the overgrown areas . In this case, you need to be careful to avoid possible snags.

The number of rods on the boat depends on how much area you have to fish. For a small reservoir, one or two are enough; on a large one, four or more rods can be used.
Where is the pike on the river [/ caption]

Briefly about trolling as a fishing method

Trolling is fishing for a pike or other predator with a spinning tackle from a boat. She moves slowly, transferring movement to the wobbler. Additionally, the fisherman can provide bait play. The deepening of the wobbler is carried out to a certain depth, at which the fisherman expects the maximum catch. The depth can be varied by selecting the required wobbler with the required depth.

Wobblers for trolling – what are they?

Trolling wobblers differ from other lures designed for other methods of catching predatory fish. One of the main features is the requirement that the lures can provide the desired game without the participation of the angler. It is important that these products have high strength and rigidity. The blade, as a rule, is made of high-strength plastic, while it has a stiffening rib. The product must be massive enough. Wobblers are usually used with a large paddle. It is important that they are able to descend to the desired depth. Different models are designed for specific diving depths. Therefore, when choosing them, the fisherman must take into account the depth at which he is going to catch predatory fish.
Wobblers for pike trolling should be powerful, with a large shoulder blade and a stiffener, should be able to withstand the strong teeth of a large pike [/ caption]

Classification

Various types of wobblers are used for fishing. They differ in the maximum immersion depth. Depending on the type, the following designations are used:

1. At surface deepening, marks “SR” or “SSR” are put.
2. “DD”, “DR” or “SDR” correspond to high immersion.
3. Wobblers marked “EDR” are designed for maximum submersion.

There is a classification that uses buoyancy as the main feature:

1. Fast pop-ups are marked “FF”.
2. “SF” are slow pop-ups.
3. Products with the “F” designation have an average flotation ability.
4. Wobblers Suspender are securely fixed at the desired depth. They are marked “SP” or “SU”.
5. Sinking – “S”.
6. If the lures are slowly sinking, then they are marked “SS” or “SSS”.
7. Fast drowners are marked “FS”.

There is also a classification according to the shape of the baits. The following types of wobblers are best suited for trolling pike
:

• roll;
• fat;
• shad;
• minnow.

The fisherman makes the choice of bait based on the necessary activity of his own game for a particular wobbler, the required depth of penetration, the characteristics of the reservoir, as well as his own fishing style.

Criterias of choice

To choose the right pike wobblers for this type of fishing, you need to consider the following:

1. It is necessary that its length be 7-10 cm, on large rivers up to 15 cm . It is necessary that during the posting this bait provides strong vibration. This choice is suitable for obtaining trophy specimens. For small pike, wobblers may be smaller. The size when choosing a wobbler for trolling pike is not the most determining factor, the toothed one is not afraid of large baits [/ caption]
2. When trolling, fish is caught at depth. It is important that the bait can easily sink to the desired depth .
3. Wobblers of various colors can be used . The choice of a suitable color depends on the specific fishing conditions. Often the fisherman tries different options and, based on the experience gained, selects the most effective option. In reservoirs with clear water, natural colors are more often used, and with turbid water, brighter ones.
4. You need to choose a bait that is capable of vibrating well and making noise in order to attract the pike .
5. It should be borne in mind that approximately on a uniform trolling wiring according to the degree of vibration , cranks and sheds go from top to bottom , then feta and after that minnow.

The choice of a good bait will largely determine the success of your fishing. How to choose wobblers for pike trolling – selection criteria, the best models for 2020-2021: https://youtu.be/safa0p89KGA

TOP 10 best wobblers for pike trolling

Choosing the right bait will allow the fisherman to increase his catch. The following are the most popular and catchy wobblers for trolling pike.

Rapala shad rap

This bait combines good quality and reasonable price. Rapala shed rap can work at depths of up to 8 meters. To place it to its extreme depth, you will need to use a special cord. The fisherman should do the swinging movements during the drive.

Megabass Live-X Leviathan

This wobbler is not cheap, but the high quality justifies the cost. Such a bait is known for the fact that with it the fisherman will not be left without a catch. The maximum immersion depth is 6-7 meters. In the process of fishing, this wobbler has a maximum oscillation amplitude. The blade beats off underwater driftwood quite efficiently.

Bomber Fat Free Shad 21

Despite the reasonable price, this bait cannot be considered budgetary. It is actively used to catch not only pikes, but also some other predatory fish. The recommended immersion depth is 8-10 meters. The owner of the bait has every reason to catch a trophy specimen.

Nils master haka deep diving

The wobbler is very popular with trollers. It is used at a relatively shallow depth of 3-5 meters and is known for its high efficiency. The bait provides a high frequency of oscillation during the posting process. Those who use it note its high strength and the possibility of using it at the bottom where there are obstacles.

Yo-Zuri 3D Crank

Yu-zuri 3d crenk – a wobbler of a famous Japanese manufacturer demonstrates traditional high quality and reliability. It is very durable and provides vibration that attracts pike and other predatory fish well. Designed for fishing at a depth of 3-5 meters. The price for this bait is at an acceptable level.

Strike pro Crankee Runner

The lure is characterized by a high vibration frequency. Can be used for fishing at depths of up to 8 meters. Most often this wobbler is used when fishing for pike in autumn. The cost is in the budget range.

Rapala deep tail dancer

The wobbler is known for its good durability and high quality. The relatively high price is fully consistent with its quality. Fishermen using it note the effectiveness of the bait at depths of 10-12 meters. Collects pike from long distances.

Bomber deep long a

The bait is designed specifically for pike fishing. It has a color that this fish will like. The bait has a permanent paint that retains its appearance even after prolonged use and pike bites. High quality is combined with a price affordable for most fishermen. Can be used for fishing at a depth of 10 meters.

Salmo Perch – famous trolling wobbler

This company produces a large number of wobblers that are used for trolling, in particular when fishing for pike. One of the most famous is Perch. This model is renowned for its performance and value for money. Works at a depth of 5 meters. Provides vibrations of large amplitude. This product is offered to customers in a large number of colors, among which everyone can find the most suitable option.

Halco sorcerer

This lure is considered one of the most effective for pike trolling. It shows high performance in almost any fishing conditions. This lure is also used when casting. The blade can be easily removed if needed. If damaged, it is easy to replace.

The best budget wobblers for pike trolling – how to choose decent and cheap ones?

A wobbler is a tackle consisting of several traditional elements. When choosing a budget option, you can take into account the requirements for them, which will be discussed in detail below.

Bait body

The body can be made of wood or plastic. After manufacturing, it is dyed. Fishermen disagree on the most suitable type of coloring. One of the original and at the same time effective solutions is a holographic coating. Sometimes transparent cases are used, inside of which there is glittering oil. Inside the body there may be plastic or metal balls, which, when moving, make a noise that attracts fish. The balls inside the body are designed not only to create vibrations that attract fish, but also to balance the body. In some models, not one, but several isolated sections are provided for them.

Blade

This transparent flat piece is attached to the front of the wobbler. In most cases, the blade is made from durable plastic, but sometimes blades are made of metal. Their size and shape are selected in such a way as to ensure the correct immersion of the bait. The depth of use of the bait depends on the size of this part. The amplitude with which vibration occurs depends on their shape. The wider the shoulder blade, the larger it is.

Hooks used

The most commonly used wobblers with tees. The number of hooks depends on the size of the bait. The largest specimens may have 4 hooks. Some fishermen prefer to use doubles. In their opinion, such a solution reduces the likelihood of the gear catching on the snag.

Ear

This part is designed to attach the tackle to the fishing line. It can be placed on the shoulder blade or on the nose. The location of the ringlet significantly affects the game of the bait. Best Chinese cheap wobblers for pike trolling with Aliexpress: https://youtu.be/MHQf2ksSYi0

Tackle collection

You can collect the tackle as follows:

1. You need to cut off two pieces of braid: one 1 meter long, the other 50 cm.
2. Each of them is tied to a swivel by the corresponding rings.
3. A wobbler is attached to a meter-long fishing line. This can be done with a carabiner.
4. A weight with a hook and a silicone attachment is attached to the half-meter part using a small carabiner.

You should get such a tackle: The
load provides a quick dive. The wobbler is attached to a lead-out lead. The triple swivel with the tackle assembled attaches to the main line. Wobblers for pike trolling in shallow water – Chinese, Japanese, Finnish models, video review: https://youtu.be/STSqaYtCcjs

Trolling pike with wobblers

For fishing, they choose reservoirs with calm water. It is preferable to use a depth of 2 to 7 meters. It is necessary that the bottom is not too tight. Places that are far from the coast and have a flat bottom are well suited. It is undesirable to fish in shallow waters, since medium-sized pikes will be the most likely prey. In the presence of an overgrown bottom, it becomes more likely to catch.
How should the boat go when fishing on the track – trolling [/ caption] Trolling for beginners – the choice of tackle, equipment, baits, equipment – video instruction from an experienced troller: https://youtu.be/GlJhx7ZEXNI Usually fishing is done from a motor boat in several rods. During wiring, it is necessary to ensure a quiet and smooth running. For trolling fishing, it is enough to use a motor with a capacity of no more than 50-80 horsepower.
Boat equipment [/ caption] The echo sounder will be very useful for this type of fishing. It will allow you to detect in advance the edge and pits at the bottom – the places where this predator is likely to be found. It will help you see at what depth the pike lives. A portable navigator will allow you to reliably remember the places where the pike was caught and return to them to make further attempts.
The echo sounder will be of great help on an unfamiliar body of water [/ caption] With this method of fishing, rods are installed on special holders on the boat. In this case, rods with a length of 1.8-2.7 meters are used. A braid with a thickness of 0.18-0.25 mm is taken as the main line. A strong line is especially necessary due to the fact that when hooked, there is no way to stop the boat instantly. Therefore, the strength of the line is essential. When trolling,
spinning or
multiplier reels with a wide drum are used.

Поделиться ссылкой: