Fishing for pike on mugs in the fall – how to equip, fishing technique

The mugs are very similar to the zherlitsa fishing tackle. They work on the same principle, but the former are more mobile, constantly moving and actively looking for fish, in contrast to stationary girders. The main advantage of the circles is that there is no need to clearly know the location of the predator, because sooner or later the pike itself will find live bait. Such tackle is often used in autumn for auxiliary pike fishing with live bait. After the equipment is set up, it remains to follow the circles and wait for the prey to hit. In order not to waste time in vain, many fishermen begin to fish for potential spots with
spinning , with the help of wobblers or other lures.
The main object of fishing for circles is pike [/ caption]

What are mugs – a general description of the tackle

Mugs are a kind of construction, which is a mobile live bait rig in the form of a mug with an antenna itself, has a tee, and a live bait is put on it. It moves in space and lures pike and other predators. The tackle is pulled out of the water when a bite occurs. Structurally, the tackle consists of the following elements:

1. A disc made of wood, foam or other material that has good water resistance and does not sink. The thickness is about 2-3 centimeters, and the diameter varies from 15 to 25 centimeters. In the middle there is a hole for the rod. A special cut for the line runs along the circle. It is usually colored red and white on different sides.
2. The rod in the center of the structure has a stop at the bottom. From above it becomes narrower, and at the end there is a hole for the fishing line. The height of the rod depends on the size of the fish and the windiness. Usually the length does not exceed the diameter of the disc. For greater convenience, the rod is painted in remarkable colors. This helps to increase the visibility of the gear.
3. For successful mug fishing, you need to use a fairly thick line or braid . However, you need to be careful, as they can injure your hands when playing. The fishing line is wound on a special slot, the size of a piece usually does not exceed 15 meters. Further, it is securely fixed to the discs using a self-tightening loop.
4. The sinker is used small, in the range of 25-30 grams, this is quite enough.

When fishing for pike with mugs, you must use a leash. The predator can easily bite through the usual fishing line. There are three types to choose from:

• of steel;
• from kevlar;
• from tungsten.

Features of autumn pike fishing on mugs

The pike prefers to attack potential prey not head-on, but across. Further, he deftly copes with the overturn of the fish and swallows quickly. Therefore, the ideal option would be to hook live bait to the fins, back or tail.
Small crucian carp as live bait [/ caption] If a single hook is used, then you should hook the bait fish to the fins, preferably the upper one. Where there will be a puncture, it is necessary to remove the scales with improvised means and plant without damaging the spine. Sometimes it can be used to put it on the tail, but for pike this method is less priority. Ideal for a double hook is a gill hook. The predator is spotted only after the bait has been swallowed. However, it should be borne in mind – the pike needs time to completely swallow the bait. The tee should be used when it is next to the live bait, while the fish remains unharmed. Sometimes you can experiment with punctures for the lip or tail, but if the size of the fish allows.
Setting the mug [/ caption]

Where to look for pike when fishing for mugs – how to properly put running bait baits

Fishing in September

As soon as autumn comes, the pike goes into a stage of increased activity. It is vital for her to work up fat in order to prepare for the frost. Already starting in September, it is better to resort to searching for the predator at a sufficient depth. Of course, during a warm autumn, it can still remain off the coast, but for fishing with circles, a depth of 2 or more meters will be more effective. September is such a month when the behavior of the pike is influenced by everything, from the time of day to temperature, weather and atmospheric pressure. It is better to fish in the warmest period of time, having previously checked the weather forecast. To be sure to catch a predator, you need to change the search points as often as possible. All places should be surveyed, from the shallowest water to places with deep bottom relief. At the beginning of autumn, the pike is constantly moving in search of food,therefore, you can find it almost everywhere. https://tytkleva.net/lovlya-xishhnoj-ryby/opisanie-povadki/shhuka-v-sentyabre.htm

“Whirling” in October

In the middle of autumn, the pike continues to feed, but it is very difficult to find it close to the shore. Algae begin to die off, because of this, small fish and fry move into the depths of water bodies, following the potential profit, pikes also deepen. The reservoirs are continuously saturated with oxygen, as there is a sharp cooling and the layers of water are mixed. This makes the pike even more active. If October turned out to be warm, then the pike is ready to rush to any potential bait. Her zhor will continue until the onset of cold weather. However, if October is cold enough, the temperature of the water will noticeably slow down the metabolism and the fish will take longer to digest their food. Accordingly, during such periods, the predator will be less active. Bites during this period occur at a depth of 5-10 meters, which is noticeably different from warm October.It is worth looking for fish in the same places as in September, but if there are no obvious deep drops on the river, then in October it is worth catching pike in circles near fallen trees and snags.
Pike stopping places in October and November [/ caption]

Fishing in November

November is the worst month for pike fishing. The fish becomes as passive as possible and lives at depth. There are also small fish, so the pike does not really need to look for prey. The predator hides in deep drops and prepares for wintering, pike often unite in flocks. When exposed to low temperatures, she becomes lazy and slow. You should not try to catch prey at night, at this time there is practically no chance of catching. The main activity of the pike falls on the day. In some regions, water bodies can already go under the ice, which means that the circles are losing their relevance. The girders will come to the rescue, which should be equipped with live bait, it does not matter whether they are alive or dead. https://tytkleva.net/lovlya-xishhnoj-ryby/opisanie-povadki/shhuka-v-noyabre.htm

What reservoirs are suitable for fishing with mugs

Ponds with no current at all or those where the mugs will stand stably on the water are best suited. River bays will be an excellent option, they have a fairly weak flow. If the current is too fast, then it will demolish the circles, and the angler simply will not have time to swim up at the time of the bite. In autumn, lakes with no current and great depth are especially relevant. Wide stretches are another ideal place for mugs. Here both the depth allows, and there is no vegetation where they can get entangled.

How to catch mugs in the fall

Fishing for pike in the fall for live bait is a very interesting process that is fraught with many nuances. In late and cold autumn, it is necessary to move to the deep parts of the reservoirs, and in the early and warm autumn, you can try to set circles near the coast, the main thing is that they are not blown away by the wind. Live bait should be active at great depths. To do this, it must be properly stored: it cannot be taken with dry hands, this can remove some of the mucus from the surface of the fish, but it must be stored in a container with cold water and not exposed to sunlight.

There is one more dubious nuance – some anglers argue that if you bait a pike in the fall in the water, it can slightly extend its life.

How you can plant live bait [/ caption] It is worth considering clear water, due to the dying off of algae and other vegetation, the pike has more chances to find something wrong. For example, if the weather is sunny outside, the boat will create an impressive shadow. The ideal conditions for pike fishing in ponds in the fall are cloudy weather with a little rain. https://tytkleva.net/lovlya-xishhnoj-ryby/zhivcovye-snasti/lovlya-na-kruzhki-osenyu.htm With the help of circles you can catch both their large individuals and small grass pike

Its useful to note! Some anglers neglect the distance between the circles, and it should be at least 4-5 meters.

How to catch pike for mugs in the fall – video master class: https://youtu.be/YIdD41Q95SU

How to properly put mugs on pike when fishing in the fall

They should be installed in the habitats of the predator. It can be:

• eyebrows;
• deep pits;
• snags and fallen trees;
• rocky bottom relief;
• vegetation boundaries and other potential pike ambush spots.

The predator responds well to active live bait that are near the bottom. You can try experimenting with depth if there are no bites at all.
Equipment for a mug for fishing on the river [/ caption] On an unfamiliar pond, it is better to place as many circles as possible away from each other, thus it will be possible to explore the pond and find promising places for fishing. As soon as one of the circles starts to move or turns over, you must immediately swim to the tackle. It should be hooked when the predator finally swallows the bait, this is indicated by the beginning of the rotation, and later the complete stop of the rotation.

How to fish for mugs of mobile and stationary structures

Every angler chooses gear based on personal preference and experience, so some prefer heavy and wooden mugs, while others prefer lightweight foam mugs. Mugs made of wood have an undeniable advantage – this is the weight of the structure, due to which the live bait rarely turns the tackle, and attempts to escape from the mug only attract the predator. Fishing for pike with live bait using circles is intuitive. Even a novice fisherman can easily figure out how to put mugs on a pike correctly in the fall. It is enough to put live bait on the hook and lower it to the desired depth. Next, the fishing line must be brought into the cutout at the base of the circle, wrap the rod several times and lower it to the cutout on the other side. Anchored and free floating mugs [/ caption]

How to do it yourself

To fish with mugs, you need to have the appropriate equipment, but as luck would have it, it may not be on sale. In fact, this is a small problem, since it is not difficult to make the tackle on your own, and the factory models do not differ in quality and reliability. Therefore, many anglers make their own mugs.
Standard sizes of circles for pike [/ caption] It doesn’t take a lot of materials to make, and the work itself doesn’t take much time.

Styrofoam

Foam mugs are very easy to make. You should start with the cutout of the circle, it should be 20-25 centimeters in diameter, and the thickness in the region of 2-3 centimeters. Along the perimeter, it is necessary to make a special depression on which the fishing line will be wound. In the middle of the workpiece, make a hole in which the mast will be attached. The best way to make a mast is to use a hard wood like ash, maple or birch. In length, it should not differ from the diameter of the circle. A small indentation should be made in the upper part, which will serve as a clamp for the fishing line. For better visibility, the circle and mast can be coated with varnish or other waterproof substances. It makes no sense to glue the mast to the mug, as it will not be possible to adjust the height during windy weather. The ideal solution would be to choose such a hole diameter,at which the mast will be tight. How to make a pike mug with your own hands: https://youtu.be/FOIrtSupgAA Another option for making a mug from a plastic bottle yourself:

Additional equipment for pike fishing on mugs

To fish effectively for mugs, you need to use a boat. Absolutely any option will do, for example, a regular inflatable model and a pair of oars. When the process takes place on spacious bodies of water, it is better to use a motor. On small rivers it is worth using a sheer rod with a sinker to get an idea of ​​the approximate depth. In order to quickly identify promising places for fishing, you should use an echo sounder, it will allow you to get an approximate idea of ​​the depth and topography of the bottom.
It is convenient to fish on the mugs from the boat [/ caption] You can take a landing net with you to make it easier to take out the pike. If space is limited in the conditions of fishing from a boat, you can use gloves and reach the catch with your hands.

Поделиться ссылкой: