Fishing for pike on mugs: equipment, where and how they are placed, the choice of live bait

The mugs are portable moving supplies for catching predatory fish with live bait, suitable for fishing both in calm waters and on the current. They can move independently under the influence of currents or winds. Since live bait is used when fishing, its actions can also lead to a change in the location of the mug.
When fishing for pike in this way, you need to have enough space to move it. Best of all, if we are talking about 100-300 meters of free water area. Otherwise, there is a high risk that the circle will wash ashore or become entangled in coastal vegetation.

If such a risk exists, then the circle should be anchored.

The most promising would be to use the tackle in those places where you can expect to find pike with the greatest probability. For this, pits, depressions at the bottom, driftwood, difficult bottom topography are suitable, in summer these are areas along water lilies, sow thistle, cattails, reeds, etc., in autumn – pits, whirlpools, dumps in depth. The circle consists of the following elements:

1. A circle with a diameter of 13-15 cm , made of foam or wood. It serves as the basis to which the entire tackle is mounted. The thickness of this element is 2.5-3.0 cm.
2. There is a groove on the circumference of the disc . It is needed to wind the fishing line. There are two cuts in different parts of the blade, which are convenient to use for fixing a fishing line or cord.
3. A hole may be provided in the center of the disc .
4. There is a sliding sinker on the line , the movement of which is limited by two stoppers.
5. At the end of the fishing line, a swivel is attached , to which a steel leash with a hook is attached, on which a live bait is placed.

The upper part is painted white or red so that the tackle is visible from afar. The weight of the lead is usually 5-15 grams. The line diameter is 0.3 mm. The best results for this tackle are shown by using a monofilament line.
Rigging circles [/ caption]

The philosophy of the circles

The use of circles is convenient when you need to fish a certain area. To do this, you need to prepare the appropriate number of gear in advance. They are positioned by sailing to the desired places on the boat. Free-floating gear is often used. If it is necessary to fish for specific places, the tackle is fixed in the right place. To do this, the sinker is lowered so that it touches the bottom.
The circle can float freely, or it can be anchored at one point [/ caption] You can also use the following methods of fixing the location of the tackle:

1. Various floating objects can be used for this purpose . For example, it could be a piece of wood or foam. It must be anchored. This can be done, for example, by attaching a fishing line with a load that lies at the bottom to it. The circle is tied at a distance of several meters to such an object.
2. Tackle can be fixed by tying the circle to stationary objects . We can talk, for example, about a bush that hangs over the water, about snags protruding above the water.

Philosophical view of the mugs – collection, do-it-yourself equipment, boat equipment, necessary equipment [/ caption]

It should be borne in mind that a fixed tackle can sometimes behave in an unusual way. She, for example, is able to roll over from the wind or current.

How to do it yourself – mounting and rigging a mug

Some anglers prefer to make this tackle with their own hands. In this case, you will need to do the following:

1. The mug can be made from fine-grained foam. The diameter should be 15-20 cm. In order to accurately cut the part, the foam must be marked in advance in the right way. The circle can be cut with a jigsaw or a sharp knife. The thickness should be 3-4 cm. Wood or polypropylene can be used as material.
2. The end of the workpiece must be processed with sandpaper.
3. On it, you need to make a groove 1 cm deep, which is necessary in order to carefully wind the fishing line.
4. A hole with a diameter of 6-8 mm is made in the center of the disc.
5. Two cuts are made perpendicular to the edge, located on opposite sides of the circle. They are necessary for fixing the fishing line.
6. A small mast is made, which will need to be fixed in the central hole. In its upper part, a cut is made with a width of 4 mm and a depth of 10 mm.
7. A sliding sinker is placed on the line. Its movements are limited by two stoppers.
8. A swivel is placed at its end, to which a leash with a hook will be attached.

TOP-3 rigs for pike fishing circles: https://youtu.be/OmcR9PCd_88 After the completion of the production, the tackle needs to be painted so that the fisherman can see it well. To do this, you need to use waterproof paints. The figure shows one of the options for making such a tackle.
How to make a pike circle with your own hands: https://youtu.be/FOIrtSupgAA

How to put correctly

In the process of fishing, the fisherman must place several circles. It is undesirable to place them side by side. The distance between them should not be less than 5 meters. At the end of the circle there is a groove that is used to wind the fishing line. Before putting the tackle, rewind the line so that the lead touches the bottom. After that, it is necessary to adjust the height so that the live bait is about 1.5 meters from the bottom.

How to anchor a circle

Before you put the tackle, you need to unwind it and lower the fishing line with a sinker into the water. If it does not reach the bottom, then you need to unwind more. You need to adjust the depth so that the bait is located at a height of one and a half meters from the bottom. The line must be fixed by placing it in the slot on the disc.
The circle can be anchored or put into free swimming [/ caption] After that, you need to plant the fry by holding a hook with a fishing line under the gills. Sometimes an additional small float is attached to the line. After that, the circle is placed on the surface of the water. Pike fishing with anchor circles: https://youtu.be/xLPe2OpuRVM

Fishing on the current

If a fisherman wants to use this tackle on the river, he must first select a promising location. Located at its upper edge, he puts the circles in a line perpendicular to the current with a distance of at least 5 meters. He returns a short distance back. Then he is rafted along with the supplied gear. At this time, he must carefully observe each circle. If he sees a bite, he should hook the fish. This method of fishing allows the fisherman to be near the tackle all the time, spending minimal effort on movement. In this way, you can fish a significant area. Fishing on the river is convenient because it has a relatively constant bottom topography. This allows mugs to be used without fear of unexpected surprises. Fishing on circles from the shore – rig option:

Catching with the wind

You can fish the area using the wind. In this case, fishing starts from the upwind side. In this case, the circles are placed in one line perpendicular to the direction of the wind. The fisherman and the tackle are driven by the wind. In this case, it is necessary to take into account the relatively high windage of the boat. The wind will affect her more than the circles. The angler should slow down the boat so as not to overtake the moving gear. This method has shown itself well on large lakes where there are constant winds and there are no currents.
In the wind, it is worth either anchoring a circle, or be ready to be brought into the grass, snag [/ caption]

Free tackle use

This method is used on reservoirs with calm water, ponds, backwaters. Arrange the circles to cover the entire perspective area. Gradually, the tackle moves chaotically under the action of live baits. With this method of fishing, you need to monitor not only the bites, but also so that the circles do not float too far. You also need to look so that the tackle does not end up where it could get stuck. When fishing in this way, it is important to know as much as possible about the bottom topography. Some people use an echo sounder for this purpose.
Pike fishing on a free circle is more catching on reservoirs without a current, on rivers the same circle should be anchored [/ caption]

Which live bait to choose

For this method of fishing, live bait is usually chosen with a length of no more than 10 cm. Any small fish can be suitable. It is best to use one that is typical for the reservoir where fishing takes place. By the time of fishing, this fish must be alive and active.

The process of catching pike mugs

After installing the circles, you need to wait for a bite. Usually, when it happens, the circle flips over. Since its sides are painted in different colors, the fisherman will be able to notice it immediately. A pike, grabbing a live bait, pulls it to the side. The line begins to unwind under the action of the movement of the fish, so the pike does not feel the tension of the line. The predator swallows live bait. You need to swim up to such a tackle carefully, avoiding noise. It is best to swim in pursuit of the movement of the mug. After the fisherman swims close, he must take the line in his hands and make a sweep. In this case, you need to do it in such a way that the circle remains in the water.

In the spring

In late spring, the pike is active. One of the favorite ways to fish is to wait for prey in an ambush. For this, underwater depth differences, pits, driftwood and driftwood are suitable. In these places, fishing with circles will be most effective.
Irrigation is a good place for pike fishing in circles in early and middle spring in early May, floating supplies should be placed along the sow thistle, coastal grass [/ caption]

Summer fishing process

At this time, the pike often swims in the upper layers of the water. It can be found in coastal thickets, near overhanging trees and bushes. Mugs will work efficiently if placed in close proximity to such places.

Fishing for mugs in the fall

During the autumn period, the fish need to prepare for the harsh winter conditions. Therefore, the pike increases its activity, striving to prepare itself as best as possible for the upcoming changes. Hunting takes place mainly at great depths or close to shelters. Strong winds often occur at this time. This makes it possible to produce an alloy using them. Cooling will help to reduce the area of ​​the bottom occupied by algae. This increases the efficiency of catching such places. How to catch pike on mugs – where to put and in what places, tactics and process of catching: https://youtu.be/DX2nkz_NIrI

Possible mistakes

You need to accurately calculate the required number of gear. If there are too many of them, they will interfere with each other. If not enough, it will reduce the catch. If the line is shorter than the depth of the reservoir, then as a result of a strong jerk, the fish will be able to pull the tackle under the water. If you make the line larger, then this situation will be unlikely. If you put a circle in the boat while playing a strong fish, then a descent may occur due to a strong jerk. If you pull on the line, leaving the tackle in the water, then in such a situation the fish will remain on the hook. It is not recommended to do jogging while standing. A man on a boat is less stable than on the ground. A sudden jerk may cause you to fall into the water.

Secrets and Tips

It is believed that the most successful place for fishing is a large river reach. The relatively flat bottom and the absence of a strong current will make it possible to use this fishing method most effectively. It is necessary to find areas of the bottom where there are holes, driftwood, flooded tree trunks. The tackle is installed in the immediate vicinity of them. Before you start fishing, you need to find out what is the bottom relief at the fishing site. It is necessary to determine the promising places in advance. For live bait, fish typical for this reservoir is best suited. Often in this case we are talking about minnows or
crucians .
When fishing, you need to be located where all the installed circles will be clearly visible. In this case, there will always be an opportunity to react to a bite in time. After the pike has grabbed the bait, you need to give it a little time. This will allow her to swallow the hook more thoroughly. If fishing takes place in an unfamiliar body of water, then it is better to use the maximum number of circles. In this case, it will be possible to cover a significant area. By how the bite will pass, you can determine the most promising areas.

Поделиться ссылкой: