Do-it-yourself fishing snack: how to make it at home and on the river bank

Do-it-yourself fishing donut: unique schemes and useful simple but important tips on how to make a simple donk without the hassle. The fishing hook is a simple and effective fishing device that allows you to achieve greater distance and accuracy when casting bait or bait. Creating such gear with your own hands not only saves money, but also provides the opportunity to customize it to suit your needs and fishing conditions.

How to make a fishing snack: general principles and schemes

Before you start creating a snack (tackle), it is important to understand what parts it usually consists of and its general principles of operation. The simplest set consists of the following basic elements: a case for storing fishing line, saoi fishing line, weight or mechanism for throwing and a hook for fixing bait. There are several types of snacks that you can make yourself: To make a DIY fishing snack at home, you will need the following:

• Tube, stick, plank or other materials for the body, where the stock of fishing line will be stored.
• fishing line
• Cargo
• Alarm (may not be).
• Fasteners (screws, nuts, etc.) in some types of hooks.
• Bait retainer (ring or hook).

It is important to consider that the materials used and the dimensions of the components will depend on the object of fishing and fishing conditions. For example, for catching crucian carp, you can use small boards with a small supply of fishing line, and for catching catfish, a stronger and more reliable material, such as metal, is required under the base.

A simple bottle-based snack

Boat bottle for catching fish on the bottom tackle, step by step instructions: https://youtu.be/nZzZfFiyYz8 Step by step instructions on how to make a cape: Step 1: Prepare the bottle. Take a plastic bottle and use a knife or scissors to make a horizontal cut on one side of the bottle. The incision should be wide enough to allow food or bait to be placed inside. Step 2: Create holes. On the top of the bottle, near the neck, make two holes opposite each other. These will be used to pass through the elastic bands or cord that will secure the rig to the bottle base. Step 3: Fill the bottle. Fill the bottom of the bottle with sand or gravel. This will provide weight and stability when casting.Step 4: Attach the bun. Pass rubber bands or ribbons through the holes on the top of the bottle and secure them to create a handle or a throwing loop. Step 5: Fasten the parts of the onast into one piece. Tie a hook, load to the main fishing line. Attach the line to the body.

What can you do right on the beach

A hand-made trap for fishing right on the shore differs from the made one in that it is more compact and mobile. And of course, it’s simple. To create the simplest set, you can use materials that can be found right on the spot, such as a stick or branch as a body and using a simple throwing mechanism. For example, just coils from oilcloth. This will allow you to quickly assemble the structure right on the shore and start fishing.

How to increase the chances when catching a simple homemade snack

The first step is to choose a fishing spot. It is advisable to choose places for fishing with the presence of underwater natural barriers, such as roots, fallen trees, stones, branches, etc. These obstacles serve as a hiding place for fish, so the chance of a catch is higher here. Then, you need to prepare the tackle. It is good if it is possible to convert a spinning rod or a fishing rod into a bottom tackle that is suitable for fishing in this area of ​​\u200b\u200bthe reservoir. After attaching the weight and the line with the hook, it is important to make sure that the reel is set correctly in relation to the strength of the fishing line. After converting the spinning rod into a bottom tackle, you need to choose the right bait that will attract fish. Some fishermen prefer to use live bait such as worms, grubs, maggots, etc. Others prefer vegetable, such as peas, corn, potatoes, etc.When the bait is chosen, it is necessary to throw the cast. The most effective way to use a hooker without a rod is to “throw” the lure. To do this, you need to set the load in motion from under you with your hand and, when it reaches a certain point, release the grip so that the bait goes hinged into the water. It is important to remember that the correct collection of tackle on the shore depends on many factors, such as the type of water body, weather, time of day, etc. Therefore, the best way to find out which type of snack will be most effective on a particular body of water is experience and practice.

Spinning bait: an advanced and possible option for a spinning player

A spinning tip is an interesting way to resolve the issue if the predator is silent, but you still want to catch. Spinning as the basis of a donkey is especially useful when fishing at long distances, when you need to cast the bait for a considerable distance. When using spinning tackle, it is easy to feed the bait and load to the desired distance.

The main thing is not to forget about the test of your rod and not to overload. You can break expensive gear!

To mount a spinning cap, you will need the following materials and tools:

• Spinning with a reel.
• Sinker.
• A tee, it can be removed from a spinner or a wobbler.
• You can come up with some kind of nod. For example, from a piece of rigid fishing line, or a flexible thin stick.

How to make a fishing tip for spinning:

1. We remove the bait without removing the carabiner at the end of the equipment.
2. We attach a sinker to the carabiner. You can have Cheburashka, or whatever is in the spinner’s box.
3. Next, we attach a hook to a separate shed.

How to use a spinning hook in action

To improve your results, you can:

1. Attach the feeder to the end of the fishing line, next to the load, or instead of it.
2. The coil must be adjusted using the clutch. For the casting to be effective and safe for the blank.
3. When throwing, pay attention to the direction and strength of the wind. This can affect the accuracy and range of the throw.
4. You should track bites by the tension of the line and / or the movement of the rod tip. You can hang an alarm. If there is one.

When you feel a bite, make a sharp and confident hook.

Feeder-type snack: collection and aspects of use in battle on a pond

Mounting a feeder-based hook is one of the most effective ways to fish. A feeder is a special rod equipped with a weight feeder that allows you to accurately deliver the bait to the required distance and hold it in place. A stretch feeder can be called a catch, but some anglers use this terminology. Popular way of feeder
installation:

rigging

An advanced feeder-type thrower tackle consists of a blank, a reel, a feeder, rig attachment elements and bait. The feeder needs to be filled with bait to attract fish. The rig should be assembled, making sure the feeder is properly attached and a suitable leash is used.

Fishing process

Throwing a feeder requires a certain technique. It is important to hold the feeder in your hand correctly, clasping it by the handle and holding the reel with your finger. When casting, you need to make a jerk and release the line at the point where the feeder will fly in a light arc over the water. It is important to pay attention to the correct coordination of movements and the strength of the throw, so that it is safe, but it also comes out to reach the desired distance.

Choosing the right fishing spot and depth

It is important to choose a suitable place for casting the feeder. These are usually places where there are fish, such as holes, ledges or coastal areas with vegetation. It is also necessary to determine the correct depth for placing the bait in the water column, based on the behavior of the fish and its habits.

Periodic feeding

An important aspect of fishing with feeder hooks is periodic overfeeding. This means regularly throwing the bait feeder in the same place to attract fish and keep them in the area. In this case, it is necessary to take into account the reaction of the fish to the amount and type of bait in order to set the optimal feeding mode.

Attention and patience

It is important to be careful and patient when fishing with feeder hooks. The fish may not immediately respond to the bait, then it will take time to attract them. It is necessary to watch for the slightest signs of a bite, such as wiggling of the rod tip or sagging of the line, and react in a timely manner. Do-it-yourself working donk (snack, postavushka): https://youtu.be/WlFJ8rzuuv8 Each angler has his own style and preferences, so it’s important to find your own unique method of using a feeder shack. This will require practice, experience and continuous study of patterns and secrets of fishing. A well-prepared and properly used feeder hook can significantly increase your chances of a successful catch.

Practical secrets of experienced

Once a feeder-based snack has been assembled, some tips on how to use it should be studied. Fill the feed container with the selected feed or bait so that the bait is packed tightly and does not spill out in flight. Then you need to make sure that enough food is used to attract fish.

Choose the strength of the throw so that the feeder lies 10-15 meters upstream if fishing is on the river. Throw the snap into the water, directing it to the right place. When throwing, pay attention to the direction and strength of the wind to ensure the accuracy of the throw. If necessary, repeat the throw,

Homemade snack for fishing for various types of fish: mounting on catfish, burbot, crucian carp

Snack for crucian carp

For catching crucian carp, a light hook with a small spring, with an anti-twist based on a plastic tube, is suitable. The bait can be attached to the hook or use a special ring for fixation. The best time for catching carp for snacks is the summer period, when it goes to deeper points.

Zakidushka for burbot

For burbot fishing, it is recommended to use a more durable cord-based hook, with a large heavy feeder. The bait can be attached to a tee or double. Catching burbot with a snack is effective in the spring and autumn periods.

How to make a pike hook with live bait

For pike fishing from the shore, it is recommended to use an active live bait fish, for example, roach, rudd. For pike, the pickup should be made of metal or durable plastic with a reliable throwing mechanism. It is recommended to catch pike on such tackle in summer and autumn.

How to assemble the simplest tackle for fishing for carp and carp

For catching carp and carp, you can use a feeder with a small weight of the feeder in the form of a container, a spring. It is advisable to fill the feeder with complementary foods that are familiar to carp in this particular reservoir. to attract fish to the place of fishing. The summer period is considered to be the most suitable for catching carp and carp using a hook.

Catfish donut

To collect a donut for a catfish with your own hands, you will need the following material and tools: Materials:

• A solid base such as a wooden board or plastic platform.
• A strong cord or thin cable for attaching bait.
• The hooks are large and strong enough to handle the weight and strength of the catfish.
• A load that will help you reach the desired depth and secure the rig on the bottom.
• Attractive bait such as fish slices, pieces of raw fish or frog.

Tools:

• Saw or knife for cutting and processing material.
• Drill or screwdriver for making holes and fixing components.
• Nippers for cutting and working with wire (if necessary).

Foundation preparation

If you are using a wooden board, cut it to size and sand it to prevent rotting. If using a plastic platform, make sure it is strong and stable enough.

Attaching hooks

Arrange the hooks on the base of the hook so that they are evenly spaced 2-3 meters apart from each other. Use a drill or screwdriver to drill holes and secure the hooks to the base. So they will not get confused during the transportation process.

Load fastening

Attach a weight to the bait of such weight that it is comfortable to cast and the equipment quickly sinks to the desired depth. This can be a lead weight or other heavy object that can be tied to a snack.

Attaching the Cord to the Base

Attach a strong cord or cable (loose end without hooks) to the base of the cape, for example, with a wide figure-eight knot.

Testing and adjustment

Do a test roll before use to ensure stability and functionality. Make adjustments as needed, such as repositioning the hooks, or adding additional weights to achieve the desired range and depth. How to make a hook for fishing with your own hands, a simple installation on burbot (suitable for catching catfish at depths up to 8-12 meters): Combined hook for burbot fishing – a primitive but effective tackle for catching a predator on the river It is worth choosing the appropriate design depending on the fish, the capabilities of the angler and the fishing conditions.

Поделиться ссылкой: