Microbalda for winter fishing: how to catch and make it yourself

Microbalda is a versatile “durilka” lure that can be used to catch a wide variety of fish, most often used in winter. In fact, it is considered a smaller copy of an ordinary bulldozer, which is made from tungsten by turning. In contrast to the
bulldozer , which is mainly used for catching predatory fish, various linens also bite on the microbald – roach, rudd, bream, crucian carp, as well as ruff and even gudgeon.
A wide variety of fish bite on the micro bald [/ caption] The micro-bald wiring resembles fishing with a jig – no
rewinder… The fisherman knocks on the bottom with the bait while simultaneously raising the turbidity, performing oscillatory movements with the rod. The rate of jerks and the amplitude of movements may differ depending on the activity of the fish, its type, depth at the point of fishing.

The first who put the production of micro-bald on stream was the Belarusian maestro of fishing art Yuri Shchors, it was he who brought the usual bald to perfection, creating a piece of jewelry and giving it to the world.

Classic Shchors microbalda – black tungsten micro cylinder and two freely hanging hooks 20 numbers [/ caption]

Balda VS microbalda

A bald is called a tackle that contains a sinker and 2 hooks. The device consists of a fishing line, at the bottom of which a sinker is attached, resembling a cream, an olive, a drop or a pear. On the sides of it there are 2 freely suspended hooks. At the top, the loop ends with a swivel that attaches to the main line. At the same time, cambric and other decorations of different colors are placed on the hooks. The bulldozer is characterized by a special principle of action. When the tackle is lifted up, the hooks slide down. When the lead falls to the bottom, the hooks quickly move up the line. Then, during this interval, they smoothly go down. Balda is considered an effective device that is used to catch predatory fish. It is most often used in winter. Microbalda is something in between a nozzle and a jig. In appearance, it resembles an ordinary bulldozer.At the same time, by the type of work, it is more similar to a jig, for example, a popular devil.
A typical micro-balda – this can be done on your own right on the pond in 5 minutes: a weight, two hooks and a suspension on the line [/ caption]

Growing popularity

The use of micro-bald among winter fishermen is due to the advantages that a fisherman receives in comparison with other fishing methods. These include the following:

1. Efficiency – this is especially true when the fish is in a passive state, which is often observed during deafness. The game of microbolds is in many ways similar to the game of a devil , but more sweeping and interesting, due to the fact that the hooks hang freely and additionally animate when falling, creating an additional attraction for the fish.
2. Ease of self-production – you can make a micro-ball right on the ice, having at hand running cylinders, several hooks and cambric / beads / beads of different sizes and colors.
3. Ease of fishing with proper skill . Having learned once, you can further apply 2-3 types of animation from those that are right for you.
4. The ability to change the wiring . A wide range of options for playing with a jig, which is important when the fish is passive and it is extremely difficult to stir it up.

At the same time, some disadvantages are characteristic of the micro bulldozer:

• the impossibility (not efficiency) of catching fish that stands at the surface of the ice;
• the need for constant observation of the nod, as small fish sometimes take barely noticeable.

Secrets of choice: color, size and decoration for microbaldy

Mormushechny balda, which has a red and white color, is most often changed for catching rudd, bream, roach. If fishing is carried out for predatory fish, a black or brown micro-bald is more suitable. The
predator preferred a black microbalda [/ caption] Beads or cambric ornaments of the underwear on the hook can also be white, red, yellow, green. In this case, cambric is usually cut so that their length and width coincide. The weight of the cargo depends on the depth of the reservoir, the presence of a current and the type of fish. So is the size. The universal size ranges from 6 to 10 mm in length and a maximum diameter of 2 to 5 mm.

White, red, yellow, as well as their combinations can be considered a universal color of jewelry on hooks, both by white and by a predator.

On muddy water and on a muddy bottom, fishing for silvery or golden bait made of non-oxidizing metal is effective. It is advisable to choose a jig with edges that make the bait more shiny. In this case, white or yellow hooks are used.

What kind of fish can you use the tackle for?

Most often, the microbalda is used for catching perch roach. However, this type of lure can also be used for fishing other types of fish. These include:

• bream;
• silver bream;
• zander;
• Pike;
• burbot;
• grayling.

Microbald fishing technique

It is possible to fish using this bait with various nods – ordinary lavsan or springs made of twisted fishing line. When using micro-baldy, they make an ordinary wiring uphill, first lowering and tapping on the bottom. At the same time, setting the walking movements to the hooks with the help of vibrations with the rod. Postings are divided into 2 types – active and passive. In the first case, they are performed by accelerating the bait with a nod. This is done with a rapid rise of the micro nozzle in the water column. Most often, this technique is used as a search technique – during the period of active feeding of fish. Passive guidance means that the bait rises slowly. At the same time, the amplitude of movements of the nod, and hence the bait, is minimal. From the outside it may seem that with this type of wiring, the microbald does not play at all. However, it is not.Thanks to the free arrangement of the hooks, they change position even with small movements with a nod. This option is more effective when fishing in the wilderness.

In general, it is worth noting that fishing with a micro-ball is akin to fishing with a jig – the amplitude of the rise, the frequency of oscillations, the number and size of pauses matter. This fundamentally distinguishes the mikrushka from the older friend of the bald – for the animation of the latter, animation such as spinning with tapping on the bottom is most often used.

Fishing roach

Green hooked cambric is suitable for this type of fish. A great option would be a combination of yellow, white, red cambric. The composition should be completed with a narrow white cambric. It is a clasp that fits snugly on the hook and presses on the rest of the elements.
Roach prefers not fast travels with the most jewel-sized microrough bolds.

Catching perch

To wash a perch, you need to do the following:

1. Lower the bait to the bottom and hit it with a sinker 2-3 times.
2. Perform monotonous lifts and drops of cargo. There must be pauses at the endpoints.
3. From time to time, you need to play along slightly with the help of abrupt movements with the rod.
4. At the slightest hint of a bite, you need to sweep.

Balalaika fishing rod plus micro balda provided the catch of a good sailor [/ caption]

Catching other fish

You can also catch the following types of fish on the micro-ball:

1. Pike perch . To catch this fish you need a powerful enough rod, thick line and big hooks.
2. Pike . It comes across most often in the by-catch, therefore, it is not worth using purposefully metal leashes. It is better to endure a cut than no bites.
3. Burbot . In some cases, the microbalda is used instead of an ordinary snapper. When fishing on a rocky bottom, burbot goes to the knock. In this case, the lead sinker must be replaced with a bronze or brass product.

Microbalda for winter fishing – video masterclass from the Shcherbakov brothers: https://youtu.be/Zh5Ihvds7CE

Features of collecting tackle

For fishing with a microbalda, you will need an ordinary balalaika fishing rod and fishing line. Its diameter should be 0.08-0.14 mm. The exact diameter should be chosen based on the size of the bait. Reducing the line diameter is not recommended. A loop made with too thin line will seriously sag. This prevents the hooks from playing correctly. In addition, they often stick to the top of the hinge. The lavsan gatehouse of the thinnest sizes is used. Its length should be 10-20 mm. The nod can also be made with a coiled line. It should be pretty tight. The nod plays an important role in making an active lead. The length of this should be 10-15 mm. If you are likely to catch large predators, it is recommended to use hooks that are large enough. In this case, the diameter of the line should also be larger. However, do not use a monofilament thicker than 0.15 mm.It is permissible to bind the microbalda using different methods. Can be attached directly to main line. In this case, first you need to thread 1 hook, then – the body of the bait and finally – the second hook. Then you can make a regular loop using a figure-eight knot. When tightening, you must maintain the required loop size. The second method of fixing the bait is to use the loop on which the microbeam was sold / knitted. It is also permissible to make it yourself from a fishing line of a larger diameter than the main one. In this case, you can attach the working line using any tight weight. Then you can make a regular loop using a figure-eight knot. When tightening, you must maintain the required loop size. The second method of fixing the bait is to use the loop on which the microbeam was sold / knitted. It is also permissible to make it yourself from a fishing line of a larger diameter than the main one. In this case, you can attach the working line using any tight weight. Then you can make a regular loop using a figure-eight knot. When tightening, you must maintain the required loop size. The second method of fixing the bait is to use the loop on which the microbeam was sold / knitted. It is also permissible to make it yourself from a fishing line of a larger diameter than the main one. In this case, you can attach the working line using any tight weight. In this case, you can attach the working line using any tight weight. In this case, you can attach the working line using any tight weight.
Easiest installation [/ caption]

Making a microbaldy with your own hands

To make a microbalda in advance at home, you need to follow these steps:

1. Select a weight, its shape and weight. In this case, you need to take into account the features of the reservoir. If you are planning to fish in places with strong currents, it is recommended to choose a large sinker.
2. You can also pour the weights on your own – in this case, make a base for the micro-bald using an ebb tide. For this, it is permissible to make molds for casting from plaster. Thanks to this, it is possible to obtain lures of different shapes.
3. File the workpieces and round off all edges. Then it is required to retreat 5 mm from the narrow part of the cone and make a hole.
4. Choose hooks commensurate with the size of the weight.
5. Put the hook on the line, then the weight, then another hook. It is important to make sure that the hooks are pointed outward.
6. Tie the fishing line into a knot. It is important to ensure that the ends are the same length.
7. Tie the ends of the fishing line and secure with a clasp or swivel.
8. Paint the bait in a bright shade. To do this, you need to use waterproof paint.

Microbalda for winter fishing, made by hand from improvised materials and soapless jigs – video instruction: https://youtu.be/jINoPeE4nQI In recent years, microbalda has been a popular bait that can be used to catch different types of fish. It is important to choose the right size and color of the jig, as well as to master several types of animation.

Поделиться ссылкой: