Zherlitsa Petrova Fishka is a unique fishing device that is used for
winter fishing . The design of the Chips is easy to install and lightweight, which is very convenient for the fisherman. At the same time, it is permissible to install a lot of these girders, covering a significant area of the reservoir at a significant distance from the angler. Thanks to this, it is possible to facilitate the search for a promising place.
- Description of the girder – what are the advantages over competitors?
- Device elements
- What kind of fish can you fish?
- Rules for installing the girdle
- Hooking and playing
- How to make Petrov’s grenade with your own hands – spare parts and instructions
- Price
- Point of view – real testimonials
- Поделиться ссылкой:
Description of the girder – what are the advantages over competitors?
Zherlitsa from Petrov is a modern device that helps to catch predatory fish with live bait. The principle of operation of the device lies in the fact that at the moment when the predator swallows the bait, the fishing line fixed on the device is released. Until the fisherman performs the sweep, the fish does not feel resistance. The Petrov chip is a unique patented device. It is easy to use. Thanks to this, the device can be used by both experienced anglers and beginners. There are hinge joints in the design. Thanks to this, the structure can be assembled into working position in 15 seconds.
Design features of the zherlitsa – clickable photo [/ caption] Zherlitsa Fishka has the following advantages:
- false bite protection – achieved through the use of an innovative system;
- elimination of the risk of idle operation – achieved due to the increased area of contact between the signaling device and the coil;
- adaptation for the left and right hand ;
- the rectangular shape of the reel – thanks to this, the product is noticeable when unwinding at long distances;
- high line capacity ;
- the ability to regulate the unwinding force ;
- fast assembly in 10-20 seconds ;
- the ability to withstand temperatures up to – 40 degrees – this is due to the use of frost-resistant plastic;
- the possibility of laying the signal system in the base .
Zherlitsa-transformer Fishka from Petrov: https://youtu.be/hyyEo0YvMvY
Device elements
The following elements are considered to be the distinctive features of Petrov’s vents:
- Unique reel shape . The rectangular spool makes it easier to observe the unwinding of the line. The advantage of the device is the size of the line container. It accommodates at least 50 meters of line with a diameter of 0.5 mm.
- Reliable large base . It is 20 cm. Thanks to this, it is possible to slow down the rate of freezing of the hole. In addition, this design feature allows the use of an ice drill with a diameter of 180 mm.
- Special lock for stabilization of the reel unwinding speed . This helps to correct the unwinding of the line and avoid tangling.
All connections are made of durable plastic [/ caption] Complete set with a multifunctional storage box for Petrov’s gutters: https://youtu.be/qinbxLpc6v0
What kind of fish can you fish?
Zherlitsa Petrov is used to catch predatory fish. Most often it is used for hunting pike. Also, the device allows you to catch the following types of fish:
- burbot;
- catfish;
- zander;
- taimen;
- perch;
- carp.
Rules for installing the girdle
For fishing to be successful, it is important to find a place where a lot of fish accumulates. For this, it is important to study the habits of various predators. Of no small importance are the peculiarities of the movement of small fish in the winter – it is followed by a predator and which is also used as bait.
Important! In a harsh winter, the interval between the girders should be no more than 5 meters. Otherwise, there is a high probability of missing the promising point at which the predator is standing.
The most promising places include:
- channel channels, curbs, zones with different depths;
- terrain and driftwood with flooded bushes;
- shoals on which there are plants;
- entrances or exits from recesses;
- areas along the reed;
- bays and estuaries.
To find the most promising points, it is recommended to place the vents along the thickets of reeds in a checkerboard pattern in 1-2 rows. In this case, it is necessary to close the maximum area, keeping the interval between working holes at least 15 meters. For effective fishing, it is recommended to use about 20 girders. To arrange gear, it is recommended to do the following:
- Early in the morning, place the vents on the most promising areas. They do not need to be moved until lunchtime.
- In the afternoon, after the end of the zhora, the predators return to ambush. This means that they move deeper. At this point, the tackle needs to be moved to find the places where the fish accumulate.
This approach will help you catch pike and perch. If the goal is burbot, it is recommended to place the equipment near the parking areas or on the trails – along the stream. Zander can be caught day or night. At the same time, in the daytime, the vents are placed above the pits, while in the dark they need to be placed above the adjacent edge, tributaries or plateaus. To install the girder, it is recommended to do the following:
- Assemble the device and evaluate its functionality.
- Make bait.
- Lower the tackle into the water. When the bottom is felt by the sinker, it is necessary to raise it to the length of the leash. Then you can raise the live bait a little more. As a result, it will be possible to place the tackle at a distance of 7-20 cm from the bottom.
- If you plan to fish in an area with a current, the sinker is not pulled out, but left below. If there are a lot of algae in the pond, the tackle must be placed in the water above or between them.
- Switch on the annunciator.
- Make sure the line reels easily.
- In the absence of a protective screen, the hole must be insulated with snow.
Hooking and playing
With the right choice of a place for fishing, the zherlitsa will definitely signal a bite, and this signal is visible at a distance of at least 200 meters. At this moment, it is imperative to correctly perform the hookup and further fish the fish. Otherwise, there is a risk of losing the catch due to the descent or breakage of the gear. So, after the alarm is triggered, you need to do the following:
- Approach the zherlitsa.
- If burbot is purposefully caught, hooking is performed immediately. To do this, you need to release the supply and pull out the fishing line with fish.
- When fishing for walleye, you need to wait. This predator often swallows live bait and remains standing still. The jogging is required at the time of the start of the movement. It will be possible to notice it by unwinding the fishing line. The same actions are performed when fishing for pike.
Testing Petrov’s gannets on winter fishing – video review: https://youtu.be/-DVa79WkQlU
How to make Petrov’s grenade with your own hands – spare parts and instructions
To make the device yourself, you need to do the following:
- Cut out the base. To do this, you can take plywood. There should be holes for the line on the base. It is also necessary to make slots for the rack and flag.
- Instead of sockets, it is permissible to use store clips.
- Make a rack. To do this, you can use a polypropylene tube. Its length depends on the thickness of the snow cover.
- It is better to buy a flag and a spring in a store.
- Modify the signal material in terms of shades, brightness and dimensions.
- Make an attachment to the base and the stand. For this, you can use a cork spool or staples. In this case, it is important to ensure that the clamps are reliable.
- Attach the spool drum. This can be done in a number of ways – using electrical tape or mounting through drilled holes. In this case, a sufficient degree of rigidity is considered an important requirement for fixation.
- Choose the correct thickness and footage of the line. You should also pay attention to the choice of hooks. It depends on the size of the fish you want to catch.
It is even easier to assemble a zerlitsa, having spare parts from the manufacturer in stock:
Spare parts for petrov zherlitsa [/ caption]
Price
The cost of Petrov’s neck is 400 rubles, the price per piece may be less and depends on the volume of the purchase:
Point of view – real testimonials
Numerous reviews confirm the effectiveness of Petrov’s gutter.
He put 5 ordinary zerlitsa and the same number of petrov zherlits. I liked the latter more. Especially valuable is the absence of metal parts to which hands can freeze. The flag is very tight and does not shoot into the snow. Michael.
Really very high quality and comfortable zherlitsa. I use up to 20 pieces at a time, which helps a lot to get a big catch. Victor.
Video review of Petrov’s zherlitsa Chip: https://youtu.be/3Ey1bBHUT7Q Zherlitsa Petrova is a popular device that is perfect for winter fishing. This device can be used to catch most predatory fish.