How to choose a cover for carp and feeder rods and do it yourself

Modern feeder rods and
carp rods can handle enormous loads when it comes to playing fish. But even very expensive carbon fiber products are completely helpless against impacts and physical deformations. Therefore, after purchasing the tackle, it makes sense to buy a rod cover to protect the equipment.

Types of rod covers and selection features

As a rule, several different covers are available from fishermen. They are all used for specific rigs. By design and spaciousness, they can be:

1. Soft – this is the most affordable carp rod cover made of soft fabric. Provides only minimal protection from dirt and is used for carrying rods over short distances.
2. Semi – rigid – made of moisture-resistant material with the installation of plastic plates or polyurethane interlayers.
3. Hard – these are also called wardrobe trunks. The structure contains a plastic frame that protects the rods from moisture and mechanical deformation.

At the same time, you can buy covers for rods with reels and simply for “bare” un-equipped blanks. Also, the products can be divided into several compartments, where up to 6 fishing rods can be placed and additionally equipped with pockets for consumables.

Before you buy a cover for carp rods, you need to consider a number of important points:

• the number of fishing rods that fit ;
• dimensions – the length of the laid out fishing rods is taken into account;
• practicality – a cover for rods must have high-quality fittings and be easy to clean, depending on the material of manufacture;
• ease of carrying – a shoulder strap is desirable, since ordinary handles are sometimes not enough;
• spaciousness – in addition to rods, sometimes you need to place other small things.

In this case, the choice will depend on the type of fishing rods. So, you can buy a cover for
carp rods with reels, there are models for feeders and surf rods, float rods, spinning rods. https://youtu.be/x-2_Pg_rYJU

Rating of carp and feeder rod covers with photos and descriptions

Two-piece rods are the most popular among
feeder and
carp anglers , and this feature has not passed by the manufacturers. Almost all companies make similar products, and many of them are produced in several versions. Today the most popular models are.

Shimano Trench 3 Rod 13ft Holdall SHTTG 08

This rigid rod case with reels is designed to carry 3 rods and additional accessories. In addition, there are additional external pockets with fasteners that allow you to attach a few more blanks to them from the outside of the cover. The Shimano rod case also features a waterproof net pocket, a small weight compartment and a separate storage space for rockets and spare spools. The cover is made of high-strength PVC materials, due to this, it has excellent wear resistance. Manufactured for 12 and 13 ft rods. Price – $ 95.

AQUATIC Ch-36S

The Aquatic cover for rods with reels is designed for carp fishing rods. The design is designed for 4 rods. The rigid base is made of durable plastic, which provides reliable protection of the blanks from deformation, and the soft baffle inside and fasteners on the walls will prevent the rods from scratching during transportation. The Aquatic rod bag is equipped with center handles and an adjustable shoulder strap. Inside there are pockets for various accessories. Price – $ 55.

Mifine 3 sections 150 cm

The Mifine 150 Carp Rod Case is designed for storing and transporting 3 rods without removing the reels. The main advantage is the safety of the rods, since a soft seal is sewn into the walls. The inner part is divided by foam rubber pads to protect the rods from damage. The Mifine rod cover has a large volume, which makes it possible to place all the necessary accessories. Outside there are 2 pockets for other little things. The product is easy to clean and has LUX-fittings. Price – $ 19.

Prologic Cruzade Rod Quiver

The Prologic Carp Rod Case accommodates up to 3 Quiver rods, nets, pegs and other fishing accessories due to its large volume. The top of the construction is made of neoprene, which allows you to reliably protect the rod ends. Also equipped with a convenient shoulder strap for carrying. Price – $ 45.

Fox r series 4 rod holdall 13FT

This is a hard carp cover for 4 rods with reels. Accommodates 13ft fishing rods. Fully padded design with a large center divider to protect the rods. The product allows you to place fishing rods with 50 mm rings and carp reels. Rod clips with ergonomic rubberized ends. On the outside there are 2 pockets: for pegs for fishing rods and for a landing net. Price – $ 140.

Rod tubes rating

Even a very delicate rod can be placed in a rigid tube without worrying that it will break. There is only one main drawback of these products – only one fishing rod can be placed in the tube, and the coil must be removed.

Silver Stream ТСР 110-160К

The tube cover for the Silver Stream carp rod is used for transporting and storing delicate tackle. Equipped with both a regular carrying handle and a shoulder strap. The bottom and top are made of durable water-resistant material. The tube itself is made of a lightweight high-strength plastic tube, sheathed with a waterproof material. At the ends there are foam shock absorbers that soften the beating during transportation. Additionally, there is a closable pocket on the side, where a landing net or pegs are placed. Price – $ 20.

Salmo 165 cm

It is a simple and reliable tube that can hold one feeder or carp rod. The structure is equipped with rigid walls that protect the rod and accessories from damage. The product is trimmed with dense material. Opens with a zippered lid. An adjustable strap is installed that allows you to carry the tube on your shoulder or in your hands. Price – $ 25.

Pontoon 21 94 cm

The tube is characterized by an original design, since it is made on the principle of a telescope. That is, when folded without fishing rods, it is assembled and practically does not take up space. If it is necessary to put rods in it, then the tube unfolds, taking the maximum length, which is quite convenient. At the same time, it is possible to adjust the length of the structure for different sizes of rods. Price – $ 45.

LeRoy Impulse

The product is designed for storage and transportation of several feeders at the same time. This range has certain advantages:

1. Soft shoulder strap for comfortable use of the tube, as well as a great design solution that makes the design attractive. In this case, the strap can be adjusted in length, and if it is not required, it is completely pulled together, pressing completely against the surface of the tube.
2. Soft rubberized handles are used to carry the case in hand, this will not allow the tube to slip off your hands.
3. At both ends of the tube there is a frame with a plastic keder, this avoids rubbing the material.
4. The tube is equipped with a hanging loop, which allows it to be conveniently stored both at home and while fishing.

Shockproof protection looks like this: from the outside there is a plastic keder, then a fabric base, foam rubber, a plastic cover and foam rubber inside the tube. So, if it accidentally falls, the entire blow falls on the keder, and the foam rubber will soften the fall. Price – $ 30.

LeRoy Impulse double

Made from wear resistant Oxford grade material. Additionally, it is protected by a frame made of plastic keder. An adjustable shoulder strap ensures easy portability. An important design element is the rubberized handle, which allows you to easily fix the case in your hand. The design is based on two high-strength plastic pipes with a diameter of 10 cm. Additionally, the tube is equipped with an external pocket. Price – $ 36.

DIY carp rod cover

Making a fishing hard or soft fabric cover for carp rods with your own hands without the appropriate knowledge of “cutting and sewing” is quite problematic. The simplest option is to order tailoring of the cover in the workshop. In any case, it will cost less than buying a product from a brand company. But the tube can be easily made from plastic pipes for the sewage system. You can buy them at any plumbing store. Here you need to select the appropriate plugs, in the future they will serve as tube lids. Foam rubber must be glued to the inside of the covers, so you can protect the tops of the fishing rods from impacts during transportation. If the cross-section of the sewer pipe is not enough for the free installation of several fishing rods into it, then the plastic simply heats up. This can be done at home even over a kitchen gas stove,and carefully give the future tube an oval shape. This design has the added advantage of being less space-consuming and more convenient than comparable round products. To make a tube, you can also use pipes made of thick-walled cardboard, on which linoleum is wound in hardware stores. The plugs are self-cut from the foam. How to make a carp cover from a sewer pipe, see the video: https://youtu.be/bAjfDL0RY9w Whichever cover you choose is a branded one, made by a world manufacturer of fishing tackle, or made on your own, the most important thing is that the rods are as protected as possible, and the pleasure of fishing was not overshadowed by the unexpectedly broken rod in the trunk of the car.This design has the added advantage of being less space-consuming and more convenient than comparable round products. To make a tube, you can also use pipes made of thick-walled cardboard, on which linoleum is wound in hardware stores. The plugs are self-cut from the foam. How to make a carp cover from a sewer pipe, see the video: https://youtu.be/bAjfDL0RY9w Whichever cover you choose is a branded one, made by a world manufacturer of fishing tackle, or made on your own, the most important thing is that the rods are as protected as possible, and the pleasure of fishing was not overshadowed by the unexpectedly broken rod in the trunk of the car.This design has the added advantage of being less space-consuming and more convenient than comparable round products. To make a tube, you can also use pipes made of thick-walled cardboard, on which linoleum is wound in hardware stores. The plugs are self-cut from the foam. How to make a carp cover from a sewer pipe, see the video: https://youtu.be/bAjfDL0RY9w Whichever cover you choose is a branded one, made by a world manufacturer of fishing tackle, or made on your own, the most important thing is that the rods are as protected as possible, and the pleasure of fishing was not overshadowed by the unexpectedly broken rod in the trunk of the car.you can also use pipes made of thick-walled cardboard, on which linoleum is wound in hardware stores. The plugs are self-cut from the foam. How to make a carp cover from a sewer pipe, see the video: https://youtu.be/bAjfDL0RY9w Whichever cover you choose is a branded one, made by a world manufacturer of fishing tackle, or made on your own, the most important thing is that the rods are as protected as possible, and the pleasure of fishing was not overshadowed by the unexpectedly broken rod in the trunk of the car.you can also use pipes made of thick-walled cardboard, on which linoleum is wound in hardware stores. The plugs are self-cut from the foam. How to make a carp cover from a sewer pipe, see the video: https://youtu.be/bAjfDL0RY9w Whichever cover you choose is a branded one, made by a world manufacturer of fishing tackle, or made on your own, the most important thing is that the rods are as protected as possible, and the pleasure of fishing was not overshadowed by the unexpectedly broken rod in the trunk of the car.whether made by a global fishing tackle manufacturer or made by yourself, the most important thing is that the rods are as protected as possible, and the pleasure of fishing is not overshadowed by an unexpectedly broken rod in the trunk of the car.whether made by a global fishing tackle manufacturer or made by yourself, the most important thing is that the rods are as protected as possible, and the pleasure of fishing is not overshadowed by an unexpectedly broken rod in the trunk of the car.

Поделиться ссылкой: