Sooner or later, most anglers face the problem of choosing a spinning reel. In the modern market of fishing tackle, there are a huge variety of them, for every taste and pocket. Spinning reels may vary by manufacturer, size, gear ratio, appearance, etc. This article will talk about an option used in spinning reels such as the byterunner.
- What is a byterunner and why is it needed?
- Why do you need a system?
- Where else can a spinning reel with a baitrunner come in handy?
- Cons of reels with baitrunner system
- The best baitrunner reels are our TOP-5
- DAIWA Emblem BR 25 A
- Shimano baitrunner x aero ra 10000
- Daiwa Infinity-X 5000 BR
- Salmo Elite BAITFEEDER 8 40BR
- Daiwa regal bri 5000
- Byterunner setup
- Поделиться ссылкой:
What is a byterunner and why is it needed?
Bytrunner (translated as “running bait”) is a very convenient mechanism for disengaging the friction brake of the reel. Looks like a flag or a lever at the back of the coil. The inclusion of the instant line release system allows you to instantly begin to freely and evenly deflate the line from the spool.
Unlike a conventional clutch, the byterunner is configured in advance. But the system starts working only when the lever is switched. You can turn it off either by resetting the lever, or simply by turning the coil handle.
Why do you need a system?
The main application of the baitrunner is fishing for large and strong fish, such as
carp and silver carp ,
carp , grass carp, barbel, etc. Therefore, the baitrunner is most often used in
carp fishing . It allows you to avoid breaking the line and does not allow you to drag the tackle into the water when biting a trophy specimen.
Where else can a spinning reel with a baitrunner come in handy?
But the use of reels with a baitrunner is not limited to carp fishing and bite standby mode. Certain advantages of using such reels can be found both in the
feeder and in the
spinning… Many anglers prefer to transport rods without reels, collecting tackle already on the pond. From the experience of anglers, we can say that it is much more convenient to do this by passing the line through the rings, throwing back the baitrunner flag, rather than the bow or loosening the friction brake. It is also much more comfortable to adjust the overhang of the rig using a bytrunner, rather than the reel return. In addition, a bite of a trophy can never be ruled out. For example, imagine a situation, you are catching an average bastard, you have a relatively thin leash, here the quiver tip bends and when you strike, you realize that there is something very heavy on the other end. If your reel is not equipped with a bytrunner, then a break is almost inevitable, since you simply will not have time to release the friction clutch. With a bytrunner, it will take you no more than a second for the reel to start giving off the line,because of what the chance to bring the trophy to the landing net multiplies.
perch on a spinning rod… This is not to say that the bites of large predators on small baits are something from the category of fantasy. Therefore, if you know that there is a possibility of catching large fish in your pond, when choosing a reel for your rod, take a closer look at models with a baitrunner. Hence it follows that reels with a baitrunner should be used in carp fishing, heavy and extremovy feeder and medium and heavy spinning. Another application of the baitrunner reel is found in marker rods. They are used when examining the bottom at the place of fishing to find the most promising point. For this, a cast is made with the main clutch fully tightened. Next, an instant cord release system is used. Then we wind up the fishing line, then turn on the mechanism and release it as needed. Why do you need a bayruner on a reel – an expert and understandable video: https: // youtu.be / lqEPBq3NSVA
Cons of reels with baitrunner system
Beginning anglers may ask: “If the bytrunner is so convenient, why aren’t all spinning reels equipped with it?” The thing is that the use of this system significantly increases the weight of the reel, and the price is also growing. As in any business, balance is important in fishing, so it is hardly reasonable to put a reel weighing 500 g on light or medium rods. In addition, as in all complex technical devices, the more complex the mechanism (and the byterunner is undoubtedly a complication), the less reliable it is.
Therefore, when choosing a coil, you should give preference to trusted manufacturers. First of all, these are of course Daiwa and Shimano. But Salmo, Ryobi and Okuma are doing just as well.
The best baitrunner reels are our TOP-5
DAIWA Emblem BR 25 A
Daiwa Emblem BR 25A – Analogue of the top Cast’izm 25 QDA reel from Daiwa only with a baytrunner system. Weight: 509 gr. Gear ratio: 5.3: 1 Number of bearings: 6 Spare spool: no Exhaust per handle rotation: 107 cm
Shimano baitrunner x aero ra 10000
The Baitrunner X-Aero 10000 RA combines the advantages and convenience of a Baitrunner reel with the long casting capabilities of the Aero Concept’s oversized spool. Weight: 590 gr. Gear ratio: 4.6: 1 Number of bearings: 6 + 1 Spare spool: no Exhaust per handle rotation: 96 cm
Daiwa Infinity-X 5000 BR
A very powerful and reliable coil from a world-famous Japanese manufacturer. Weight: 781 gr. Gear ratio: 4.2: 1 Number of bearings: 5 Spare spool: 1 pc. Exhaust per handle turn: 99.5 cm
Salmo Elite BAITFEEDER 8 40BR
Excellent value for money. Weight: 376 gr. Gear ratio: 5.2: 1 Number of bearings: 7 + 1 Spare spool: 1 pc.
Daiwa regal bri 5000
A dive-like quality reel, despite a very low price. Weight: 680 gr. Gear ratio: 4.6: 1 Number of bearings: 3 Spare spool: no
Byterunner setup
To set up a byterunner, you first need to determine how you will use it. If you use a reel with a baitrunner in carp fishing, for example, on a commercial pond, then its function is to prevent the carp or other large fish from taking the tackle into the water when biting, but dragging the bait without resistance until you make a sweep, in which case the trigger should be as relaxed as possible, while the clutch is adjusted for the breaking load of the leash. Accordingly, fishing takes place according to the following algorithm: before you make a cast, you adjust the friction clutch, weaken the baitrunner as much as possible, but,
ATTENTION!Turn it off before casting, this is done so that when casting a heavy rig, the cord or line does not injure your fingers. Then you cast the bait, exhaust the slack, set the rod on a stand with signaling devices and only then turn on the baitrunner. Then, when the signaling device has informed you about the bite, you go to the rod, pick it up after that, either by resetting the flag, or by turning the handle, turn off the bytrunner and make a sweep. With this method, playing fish with the help of a friction clutch.
