Fishing for carp on the top, the secrets of catching on the top

Fishing for carp on top of standing ponds is done by almost all anglers, both beginners and experienced. Although this method is not sports, it shows excellent results. The top is a compressed industrial waste left over after processing oil crops, usually sunflower seeds.

The principle of operation of the top of the boat when fishing for carp and carp

The top is a rig, where a flat weight is at the base. Leashes with hooks cling to it, which are inserted into the bait. In this case, the role of the latter is played by a briquette from a top, it is fixed to the weight in different ways: with an elastic band, thread, self-tapping screw. Carp – Fish feeds by filtering water through their gills. The carp will approach the flavored bait and swallow the hooks at the same time as the cloudy source of nutrient medium. Most often, self-chopping occurs and the fisherman only needs to get the trophy.
Weight for the top mount [/ caption]

Pros and cons of such a rig

Fishing for carp on the top has the following advantages:

1. Efficiency . This tackle bites both carp and carp , as well as other white fish. The rig is primarily focused on capturing trophies.
2. Simplicity . I catch carp on the top and the device on the top can be mastered in a few minutes.
3. Availability . Even if there are no special skills, it is not difficult to make a do-it-yourself top for carp fishing, while the costs for this equipment are penny.
4. Fishing at any time of the year . This rig is used in any season except winter and spawning restrictions.
5. Versatility . The top rod works well both on bottom rods and on other rigs ( feeder , float ).

Of the minuses, it is necessary to highlight – high requirements for other elements of tackle. All parts of the tackle must be reliable.

Using a bottom rig when fishing for carp on cake

Basically, fishing for carp on the top in spring and summer is done using a bottom rod, while the device of this rod looks like this:

1. Fishing rod . Makushatnik is a heavy rig, which is designed for catching trophy specimens, therefore, rods with a length of 3.3-3.9 meters with a maximum test (at least 100 grams) are chosen for this. The pad is heavy rig [/ caption]
2. Coil . It is advisable to have a spinning reel equipped with a bytrunner with a size of 2500-3500 Shimano.
3. Zhmyhovka . And the base of the top is a heavy lead plate, weighing about 100 grams.
4. Undergrowth . It is required to fix the head to the main line, as a rule, a braid with a cross section of 0.35-0.45 mm is used as this, while the length should be about 50 cm.
5. Signaling device . Most often, fishermen install several carp rods, so the use of an electronic signaling device is advisable, but taking into account the expensive cost, you can also use a regular bell.
6. Leashes and hooks . Most often, carp leads equipped with hooks No. 6-10 are used. Fishermen have different opinions regarding the size of the leashes. Leashes of 20-25 cm provoke self-undercutting, as they get tangled in the gills of the fish. At the same time, leashes of 5-10 cm will make fishing more sporty: carp sometimes spits out the hook, but with due experience of the fisherman, it is cut by the lip and does not get injured when fishing. Usually 4 leashes are used.
7. Fishing line . The main line should have a cross section of 0.35-0.45 mm, while it must have good extensibility, this will reduce the load on the line when fishing for trophy fish.

Oil cake assembly [/ caption]

Making a do-it-yourself top rack

Ready-made rigs are sold at any fishing store, but you can make a do-it-yourself top for carp fishing. Step-by-step instructions: Five holes are made in a lead plate of the required weight: four on the sides for the leads and 1 in the center for the undergrowth.

1. Thinking over the fixing of the briquette. Many ready-made earpieces are equipped with special belts; for do-it-yourself designs, there are different options. In this case, either a bolt is screwed in in the middle to screw on the top, or ordinary “rubber bands for money” are used.
2. We prepare and tie leashes with hooks.
3. We knit the undergrowth and fix the top to the main line.
4. We install the cake briquette into the cake and insert the hooks into it. The dimensions of the bar must correspond to the lead plate. Most often, they are all made of 30x30x60 mm.

Self-made top hat [/ caption] Top head for catching carp and carp with your own hands – video tips and life hacks: https://youtu.be/nL68WeYbR24

How to make briquettes of makuha yourself

You can do it yourself, but this requires some equipment. It takes a certain amount of time, but the fisherman will always be with the top of the head, regardless of the opportunity to buy it at the fisherman’s shop. It should be remembered that unpackaged briquettes quickly lose their pleasant aroma after production. Of course, the fish senses this, which will make fishing less effective. Step-by-step instruction:

1. The seeds need to be fried in a skillet.
2. Grind them on a coffee grinder.
3. Pour the prepared raw materials into the press. Today it is possible to buy hydraulic structures for squeezing oil, but many fishermen use handicraft presses.
4. We take out the circle from the press, unfold it and install it again.
5. We heat the disk in a steam bath. This will remove the remaining oil.
6. We saw the circle into briquettes of the required size.

When and where to fish

This rig can be used at any time of the year in open water. In the spring season, one should not forget about the spawning prohibition. At the same time, it is impossible to use tackle with a lot of hooks, but you can install “sports” designs of the top pads. To do this, you only need to buy
carp boilies , which are mounted on a hair rig. It must be remembered that the time of carp activity in the summer season most often passes into the night and early morning, while it comes closer to the coastline for feeding. But this is not an obligatory rule: if you first study the relief of the bottom plateau, sometimes carps bite at noon.
Fishing on the top – it is good to spice it up with a tasty dip [/ caption] The most promising areas are the edges and pits, places with flooded trees, the boundaries between aquatic vegetation and clear water. To determine the relief, weights are usually used in the form of a “mace” (you need to find out the time of the fall of the weight by throwing it in one direction and slowly decreasing the distance). But it is much more convenient to use an echo sounder. The bottom must be dense, preferably with the presence of a shellfish in this place. Fishing for carp on the makuha – video from the shore of the reservoir: https://youtu.be/3rn1RKuHfPg

Technique and secrets of catching on the top

The tactics of catching carp and carp on the top of the bed begins with the choice of a promising site and feeding it. Long distance bait is delivered using slingshots, rockets,
boatsetc. In some cases, you can do without starting complementary foods by immediately throwing in the rig. A makukha of medium density, half an hour after casting, begins to dust, which attracts fish. Before throwing the tackle into the top, you need to insert the hooks, otherwise the leashes will get tangled even during the cast. Donkeys are placed on the shore on a rod or stag, which are equipped with electronic signaling devices for fishing, and the fisherman expects a bite. The soaking time of the cake will depend on its density and the presence of a current in the reservoir, but most often it completely dissolves within one hour.
Working rods on the rod-pod [/ caption] In some cases, the first fish bite within half an hour after casting the rig, but this is more luck, which allowed the carp to be lured under the nose. At the same time, an active bite occurs, it is simply impossible to miss it. If long leashes are installed, then the fish will most likely self-hook, while short leashes will require a different tactic – you need to wait a couple of seconds before hooking. The most important point is fishing. In this case, you should not make jerks, but also do not let the fish go to the side. It is required to try to raise the carp’s head above the water surface so that it takes a breath of air. So, even a trophy specimen will lose strength and “lie” on its side, this will contribute to the unhindered landing of the landing net and the extraction of fish. Fishing for carp on the top of the water – video under water: https: // youtu.be / kFLVDPwtA6A Large carp or common carp is a desirable prey for every angler, but you need to remember about the elements of sport fishing. To do this, you can choose more gentle rigs, which in some cases will be even more catchy.

Поделиться ссылкой: