Ryobi reels are respected by anglers for their power and reliability. The low cost also contributes to the popularity of these devices. The largest size reels are ideal for
heavy jig fishing ,
trolling with sticky wobblers and
feeder fishing .
Main features of Ryobi reels
What are the requirements for modern spinning reels? The list is not that long. The requirements are as follows:
- smooth running;
- even laying of the fishing line or cord on the spool;
- body strength;
- reliability;
- durability;
- small mass.
Ryobi coils meet all of the listed requirements except for the last one. They are somewhat heavy. This apparent disadvantage is due to the fact that almost all parts of the product are made of metal. Therefore, Ryobi coils are strong, reliable and durable.
- the principle of an endless screw , thanks to which the fishing line or cord is evenly and tightly wound on the spool;
- coating of the line guide roller and spool rim with titanium nitride , due to which they become practically not subject to corrosion and mechanical damage. The descent of the fishing line or line is greatly facilitated when casting, and when reeling, friction is reduced;
- the use of closed-type bearings , so that sand and dirt do not get into them;
- an additional insert into the friction brake of a rubberized pad , which prevents water and dirt from entering this important element of the device;
- a handle that is screwed directly into the main pair , which makes the reel strong and prevents backlash.
Important! With Ryobi reels, such troubles as spontaneous closing of the bow and overlapping of the line at the end of the line roller never happen.
Ryobi Excia 4000 reel
Ryobi Exia 4000 reels have been produced for a long time. After they were replaced by the updated Ryobi Excia MX 4000 series, it became very problematic to get them. This model was distinguished by well-thought-out ergonomics, made of an aluminum alloy with increased shock resistance, body, spool and rotor, hollow bow of the line. The Ryobi Excia 4000 had the following specifications:
- friction clutch – front;
- class – medium – medium-heavy;
- weight – 290 g;
- maximum tractive effort on the friction clutch – 6 kg;
- number of ball bearings – 8;
- roller bearing – 1;
- line capacity of the spool – 185 meters of line with a diameter of 0.2 mm;
- the amount of line wound on the spool in one turn of the reel handle – 96 cm;
- gear ratio – 4.9: 1.
Almost all Ryobi coils are considered power coils, in contrast to high-speed coils, in which the gear ratio can reach 6.0: 1.
Ryobi Excia MX 4000 reel
The renewed MX series differs from the previous one by the following innovations:
- magnesium alloy body;
- aluminum main gear, brass rotor gear and plastic endless screw parasitic gear;
- cross winding of a fishing line or cord onto a spool.
The characteristics of this product are shown below:
- friction clutch – front;
- class – medium – medium-heavy;
- weight – 290 g;
- maximum tractive effort on the friction clutch – 6 kg;
- number of ball bearings – 8;
- roller bearing – 1;
- line capacity of the spool – 290 meters of line with a diameter of 0.25 mm;
- the amount of line wound on the spool in one turn of the reel handle – 96 cm;
- gear ratio – 4.9: 1;
- price – from 4.7 thousand rubles.
Attention! Comparison of Exia MX coils shows that all models of the series, i.e. from 1000 to 4000 have the same weight and maximum tractive effort on the clutch. Thus, it turns out that they differ only in the size of the spool, and their mechanism is the same.
About the Ryobi Axia 2000 reel in detail . How to disassemble and lubricate the RYOBI EXCIA 4000 coil, how to lubricate the spinning coil: https://youtu.be/cUjdAbcy66o
Pros and cons of Ryobi Excia MX 4000 coil
This device has the following advantages:
- easy and smooth running . Even with heavy baits, the wiring is not at all tiring;
- noiselessness . The new coil is very quiet. Rustling may occur over time;
- power . Competent playing of large fish will not affect the working qualities of the reel in any way. The same applies to trolling with large, stubborn wobblers;
- reliability . The coil is not afraid of water and dirt;
- versatility . The Axia MX 4000 can be used for casting with a variety of lures, for trolling and for feeder fishing;
- durability . With proper care, the coil can work properly for several years;
- low cost .
The disadvantages of this model are common for all Ryobi spinners – the relatively large weight and the lack of a spare spool.
Where to buy a reel
You can buy this product at fishing shops or on the Internet. On the latter, the price is usually lower, but you can run into a fake. Too low a cost should alert the angler.
User reviews of Ryobi Excia MX 4000 reel – real application experience
On the website spinningline.ru you can find 202 reviews about this reel. Anglers’ opinions can vary dramatically: from enthusiastic to extremely negative. Almost everyone agrees that the device cannot be killed. Many people do not like too much weight, but it seems unjustified to demand some kind of exceptional lightness from an all-metal coil. For some users, when winding up, the cord sometimes begins to wind around the clutch nut. Some other (not all) coils of this series are also guilty of this. In maintenance services, this drawback can be eliminated.
There are also subjective expressions of discontent. For example, some people don’t like the folding handle. You may ask – if you are dissatisfied, why did you buy it? Someone does not get long casts. At the same time, the fisherman does not indicate with what lures he catches. It is known that the aerodynamic properties of different lures are different.
Most anglers agree that the Ryobi Excia MX 4000 has a price / performance ratio that could not be better.
Healthy! Even a tractor like the Excia MX 4000 should not be overloaded. The maximum weight for fishing with jig rigs can be considered 42 grams. She definitely shouldn’t go fishing with jerkbaits.
In general, the Ryobi Excia MX 4000 reel can be called a “workhorse” that will not let you down at a difficult moment and will give you pleasure from the fishing process.
