Choosing a reel for a feeder is an important point when assembling a feeder equipment. The poor quality of this essential element of the tackle will significantly reduce the convenience when fishing, since the reel is not only a device for storing braids or fishing line. Its design and quality directly affects fishing, the distance of throwing the rig, the possibility of beards appearing, the speed of exhausting, etc. Therefore, it is important for beginners to know how to choose a coil for a feeder and what parameters to pay attention to.
- Standard size
- Number of bearings
- Gear ratio
- Spool design
- Bytruner
- Weight
- TOP 10 best feeder coils
- 1. Daiwa Laguna E3000B
- 2. Ryobi Arctica 4000
- 3. Shimano Stradic CI4 + C3000FB
- 4. Volzhanka Meteor 3000
- 5. Stinger Forceage Neo 3000
- 6. Salmo Elite Baitfeeder 7 4000 BR
- 7. Okuma Inspira ISX-30R
- 8. Ryobi Excia MX3000
- 9. Shimano 17 Ultegra C3000FB
- 10. DAIWA Fuego 5000 DC XH LT
- Rating of quality budget feeder coils
- 1. GRFISH Astra 2500F
- 2. MIKADO Inazuma 4006 FD
- 3. Salmo Sniper Baitfeeder 4 3040 BR
- Поделиться ссылкой:
Standard size
It will not work to pick up a feeder reel without taking into account the standard size. It significantly affects the balance of the entire rig and, of course, the comfort of fishing, and the strength of the small 2000 reels for 100 grams of feeders is clearly not enough. Much will also depend on the specifics of the rod itself; it is best to choose a reel together with a rod in a fishing store, but usually the size selection is done like this:
- pickers 2.1-3.3 meters – coil sizes 2500-3500 according to Shimano’s classification;
- feeders 3.3-3.6 meters – models 4500-5500;
- reinforced feeder more than 3.9 meters – spool 7000.
Attention: When choosing reels in the store, you must remember that the popular fishing companies Daiva and Shimano have different size numbers.
Number of bearings
Many fishermen are sure that in this case everything is quite simple – the more bearings, the better. But it is not so. A reel for a feeder rod is required to have a smooth ride and a margin of safety, but for popular manufacturers, products with a large number of bearings are often very expensive. And although most manufacturers install more than 10 bearings, only 4 are essential:
- 2 support in the handle;
- on the shaft;
- in the line guide.
It should also be remembered that many Chinese designs with 10 balls perform worse than branded designs with 4 bearings.
Gear ratio
If we consider what the gear ratio on the reel is, then conditionally all products are divided into power and high-speed, as well as intermediate models. Power coils are used to fish out large fish and to install heavy springs (feeders). Such reels have an increased safety margin and, thanks to the massive mechanism, they serve for a longer time, but it takes more time to unwind the tackle. High-speed reels are characterized by a more fragile structure and a shorter period of operation, but they are very much in demand among athletes, since they save time in competitions. Many novice fishermen acquire intermediate models. The gear ratio can usually be seen on the body of the product, but different manufacturers may have the markings at different locations on the reel. The parameters in this case are rather arbitrary,so the figure 5.5: 1 denotes a high-speed design: for 1 turn of the handle, the line manager makes 5.5 turns. 4.1: 1 models are power models. And 5: 1 products are intermediate, they should be purchased by beginners.
Spool design
Pay attention to the material and depth of the spool. Often reels are sold with several spools in a set: ordinary plastic for fishing line, steel, used for braiding.
Caution: It is recommended to choose spools with rounded steel clips, which are required to secure the braid, this allows the spring to fall at the same distance. Small plastic triangular clips are mounted on reels for spinning reels.
But there is one caveat here. By and large, feeder reels are a must for casting 100 gram feeders; conventional spinning models will not be able to cope with this load. But for a picker, where the mass of the feeder is usually no more than 60 grams, spinning reels can also be used with bait. Unless the clips on these spools are plastic, with pointed edges, they can damage the line or braid during casting. Much will also depend on the shape of the spool. Feeder coils are available in four manufacturing options:
- Classic spool . Often there are two spools in the basic configuration – a plastic classic AirSpool or a metal LongCast. The classic spool allows you to wind up the required amount of line, and also, thanks to the long lever, makes it easier to fish out large fish.
- Anti Backlash System (reverse cone) . Avoids dropping loops, but lowers the throw distance.
- Tapered LongCast . It makes it possible to provide long distance casting, but the likelihood of throwing off loops increases.
- Small spool AirSpool . Perfect for small-section lines, to a certain extent speeds up fishing, this is especially important in competitions.
Some fishermen recommend reducing the spool depth by rewinding the tape. This is not a very good way – in the heat, the adhesive composition of electrical tape will be on the line and quickly ruin it. For this, backing is used – an inexpensive fishing line that rolls under the braid.
Bytruner
Baitrunner feeder
reels are a fairly popular solution offered by fishing shops. But some feederists have big doubts about the importance of this mechanism for feeder fishing. The bayruner makes it possible to loosen the friction in one click, this allows, for example, a carp to easily wind the line from the reel during a bite, and the fishing rod is securely on the stand. This mechanism is more in demand in
carp fishing , with this method of fishing the fisherman often moves away from the rods for a long time, and bites, especially if it is a large specimen, are quite rare. In this case, the bytruner helps you not to worry about the safety of the rig.
Weight
When fishing with a feeder, this is not such an important indicator as, for example, in an ultralight. But the balance of the rod must still be observed. A large and heavy, often weighing about 600 grams 5000 reel together with a short picker can work, but the pleasure of fishing with this tackle is not obtained. Roughly the same happens with a light coil, which is mounted on a 3.9 meter heavy feeder.
TOP 10 best feeder coils
Today on the market of fishing tackle, in the series “feeder reels”, there are products of popular European and American brands, as well as models of domestic production.
1. Daiwa Laguna E3000B
The gear ratio of 5.3: 1 is within the conventional norm and allows you to quickly drain the line. Together with the steel body of the reel, Daiva equipped the large gear of this model with bearings. The main spool is made of aluminum, but the kit contains a spare plastic one. This versatile Daiwa feeder reel is highly durable. In addition, it has an excellent smooth ride. But there are several drawbacks – backlash on the handle and difficulties with the rotation of the line guide roller. Price – $ 45.
2. Ryobi Arctica 4000
Ryobi developed a reel that was initially used by spinning reels, but then began to be installed on a feeder. The Arctic 4000 is designed to withstand heavy feeders. The sturdy body is made of carbon fiber and aluminum. Coil weight 320 gr. The ergonomic handle is repositionable. Supplied with an aluminum spool. The reel is reliable and versatile. As a disadvantage – after a season, the design begins to play. Price – $ 60.
3. Shimano Stradic CI4 + C3000FB
The Shimano Stradik reel for the feeder is characterized by manufacturability and light weight (190 g). The protective system of the internal mechanism COREPROTECT is installed, which does not allow the ingress of dust and moisture. The body of the product is made using the new G-Free Body technology. The Magnumlite rotor is lightweight and has low inertia. The reel is quiet and smooth. Among the disadvantages – there is no bearing in the spool, the price. Price – $ 200.
4. Volzhanka Meteor 3000
A good budget feeder reel with microstepping friction brake control. The spool is equipped with two bearings. The design uses a rotor made of graphite and a spool made of aluminum, due to which the weight of the product is only 297 grams. The maximum load that the braking system can withstand is 5 kg. 8 bearings are responsible for smooth rotation. Among the shortcomings – noise during winding and undulation of the cord after rewinding to the spool from the reel. Price – $ 20.
5. Stinger Forceage Neo 3000
Joint development of Chinese and Russian engineers. First, you need to highlight the quality of the winding of the fishing line and cord. Also, the reel has a smooth ride and a friction clutch made of steel and bronze. The handle and spool are made of aluminum. The result is a decent lightweight design (312g). Among the shortcomings – there is not enough lubricant in the coil, so after a while it starts to make noise, and the graphite on the body can also crack from impact. Price – $ 60.
6. Salmo Elite Baitfeeder 7 4000 BR
This model has an original braking system, in which the rear and front drag are combined, and is equipped with a bytrunner. The reel has a reliable body, comfortable grip, attractive appearance, and soft travel. The set includes an aluminum and graphite spool. Among the disadvantages is a large weight (365 g). Price – $ 40.
7. Okuma Inspira ISX-30R
This is a Chinese feeder reel, in which the developers did not go along the path of reducing the cost, but pursued quality improvement. 9 bearings are responsible for the smooth running; due to the excellent balancing, there is no vibration. Dust and water tightness is ensured by a sealed gasket. Of the shortcomings – the line sometimes gets between the spool and the friction. Price – $ 90.
8. Ryobi Excia MX3000
Thanks to many details that are made of metal, the construction pleases with high strength. The stroke is smooth, there are no backlashes, it has an ideal line winding, does not require special care. The number of bearings is 9. Disadvantages – one spool is included. Price – $ 88.
9. Shimano 17 Ultegra C3000FB
At the heart of this reel is the 12 Ultegra. The brake system can withstand 9 kg, has a reliable body, smooth running, line reels without bumps. The disadvantages are high cost and some bearings are not “native”. Price – $ 160.
10. DAIWA Fuego 5000 DC XH LT
This is an elite feeder reel. Gathered in Vietnam, it is of high quality. Due to graphite and the latest technology, it is lightweight (250 g). A distinctive feature is the Tough Digigear gears. This allows:
- increase the service life;
- increase power;
- reduce dimensions.
Rating of quality budget feeder coils
Feeder fishing is usually done with decent fish. The main load during the starting lure and when playing is on the reel. Therefore, their choice must be approached responsibly. Included in the rating of the best budget feeder coils.
1. GRFISH Astra 2500F
The spinning reel is characterized by its beautiful appearance and durability. The body is made of composite, the spool is made of graphite. The reel is equipped with a front drag. Fishermen note the ease of use and long service time. Ideal for a feeder. Advantages:
- light weight;
- reliability;
- low price;
- good quality;
- ease of use.
Disadvantages: Not determined Price – $ 18.
2. MIKADO Inazuma 4006 FD
Reliable low cost feeder model. Friction clutch – front, number of bearings – 8 pieces. Supplied with two aluminum spools. Anglers note the versatility, strength, long service life of the reel. Advantages:
- perfectly reels the fishing line;
- high-quality assembly;
- affordable cost.
Disadvantages: Cannot be used with thin braids. Price – $ 23.
3. Salmo Sniper Baitfeeder 4 3040 BR
A great reel for beginners and hobbyists alike. Can be used for spinning and feeder fishing. It is characterized by durability and ease of use. The main storage requirement is the unscrewed clutch. Advantages:
- graphite body;
- spare spool;
- long service time;
- quiet running.
Disadvantages: Not determined. Price – $ 24.
