The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Ловля на фидер

The purpose of the fishing alarm is to react clearly, understandable to the angler, to the fish biting or touching the bait and the hook. Such indicators can be visual, audio or audible. The use of signaling devices gives the fisherman the following possibilities:

  1. When using this device, there is no need to constantly be on the alert and literally guard the tackle.
  2. Its use makes fishing more comfortable.
  3. If you need to keep track of several gear at the same time, the signaling device will allow you not to miss a bite.
  4. With a large number of tackles, you can set up various sound signals so that it is clear which direction to run – which ringing.
  5. If there are indicators, the fisherman will not miss the right moment and will make the hooking on time.

The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeBells – the old-fashioned
method of bite indication [/ caption] If you do not respond to the bite in time, the fish will break off the hook and will be missed. The signaling device will make fishing more calm, measured and efficient. This is especially important if fishing is combined with outdoor recreation.

Perhaps the simplest bite signaling device can be called a split stick, in the slot of which a fishing line is fixed. When biting, the bar soars up, or, on the contrary, falls down, depending on whether a fish is coming towards or from a fisherman. A more advanced version of bells / bells are signaling devices, which are now used to register a bite by modern donochniks, feeders and floaters.


The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeBells are a cheap and effective indicator of a bite, but torment in the wind [/ caption]

Types of bite alarms, what are the requirements for indicators for fishing

Signaling devices emit a sound, emit light or physically move when they bite, therefore indicators are divided into electronic (sound and light), just sound (bells, bells, rattles), just glowing (various fireflies) and mechanical (visual impact). There are also combined options. Mechanical indicators, in turn, are divided into swingers, hangers, climbing monkeys, and springers.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeSwinger [/ caption]
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeHunger [/ caption]
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeFishing Springs [/ caption] In order to effectively perform their task, alarms must provide the following functions:

  1. Stand out clearly against the background of the surrounding environment (for example, on the water or in thickets).
  2. The device should not prevent the fisherman from changing the line tension as needed.
  3. The signaling device must remain stable against wind gusts or the formation of waves.
  4. The indicator should fit comfortably on the stand.
  5. When biting, it should not catch the thread or interfere with the fish’s playing.
  6. Convenient when there is an LED inside. This helps to better control the tackle and improve the visibility of the device in low light conditions.

The most important characteristics are the sensitivity and visibility of the supplied signal.

Electronic bite alarm: choosing the best model

The use of electronic devices as bite alarms has its advantages:

  1. Self-adjusting sensitivity is available in these devices.
  2. Electronic signaling devices are capable of giving several types of signals.
  3. Convenient and reliable mounts are provided for fixing on the rod.
  4. Simplicity of settings and use of modern electrical signaling devices.
  5. It is possible to connect to other types of electronic devices – to mobile devices, tablets.

Such a signaling device is attached to the rod so that it presses the line and can feel even the slightest movement of the line. When a bite is detected, it gives a sound or light type signal. The ability to set your own parameters will help, for example, in cases where the bite of a
carp needs to be distinguished from a simple movement of the feeder along the bottom of the reservoir in the current.

Hoxwell Pager Indicator Kit – Model HL54

An electronic bite alarm with pager provides additional options for bite notification. Usually, the fisherman must be in close proximity to receive the signal. This design additionally uses a transmitter capable of transmitting a signal over a distance of up to one hundred meters. With this device, when fishing at night, there is no need to constantly check the tackle. Just put the transmitter in your pocket and wait for the signal.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Mikado AMS01-HS-D

This model is designed for those anglers who fish with live bait. There is a fine adjustment of the sensitivity, which will filter out the bite signal from random movements of the bait. To increase the reliability of the attachment when fishing for large fish, belts are used. As a disadvantage, it is noted that it is impossible to adjust the level of the bite signal.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

LED bite alarm Megatex Jay-4

This model has high sensitivity. She can easily distinguish a bite from other line twitches. A bite signal is given by a flashing LED or by a sound signal. The weight of the device does not exceed 50 grams.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

TONGUU Fishing Alarm with Indicator Light

Here, the manufacturer paid special attention not only to the quality of the signaling device, but also to the strength of the connection with the spinning rod. A robust eccentric clamp is used for this. A sound or light signal can be used for notification. Adjustment of its intensity is available. The disadvantage is the lack of adjustment of the bite force.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Bite alarm Mikado AMS01-HX with different indicators

This model provides fine adjustment of the sensitivity of the device. Two LED indicators of different colors are used for signaling, located on the sides of the device. Green corresponds to the beginning of the bite, and red corresponds to strong jerks. If desired, the fisherman can set a color alert.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Barracuda T5 (Condor Barracuda T5) with various types of signaling – sound, light

The product was created by the Chinese company “Condor”. The device is made in the form of the top of a fishing rod stand. Here you can insist on determining the speed of the line, the volume and tone of the bite signal. You can also use the light signaling in the form of a blinking LED.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

EASTSHARK SP-01

The product line of this company includes many quality models, but the SP-01 is considered the most popular. Here, there are 8 volume levels and 8 types of tonality for signaling. The signaling device in its work can apply 5 levels of sensitivity.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Annunciator

This bite alarm device combines ease of use with high efficiency. It is attached to the rod with a clip. Light and sound indication of bite is available in the device. The action of the alarm is based on determining the degree of line tension.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Delkim – electronic signaling device with a pager

Pager notification is provided. It can be done with a beep or vibration. Up to six signaling devices can be connected to one central device at the same time.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Kosadaka T4

In this indicator, you can adjust the volume and tone of the notification. The sensitivity level can be adjusted in the device. The signaling device is well protected from moisture and the possibility of mechanical damage.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Mechanical bite alarms

Bite indicators with mechanical alert detect a bite for the angler based on changes in rod and line movement. These devices are less functional than electronic devices. But more reliable.

Winter signaling device “Zhuravlik” Megateks

The Crane bite detector is of an electronic type and a mechanical one, the latter includes a coupling attached to the rod and two arms. A fishing line passes through one, and a weight is attached to the other. Both sides must be in balance. When jerking, it is disturbed and is a signal for the fisherman to make a sweep.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Hangers Prologic K3 Hang Indicator Set 3 Rod

In this model of hangers, a small colored flask has attachments to the line and a thread on which it is suspended from the rod. When the fish pulls on the alarm, the movement of the color cone draws the attention of the fisherman.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Mikado AMR02-1199-22

Two bells are attached to a plastic clothespin. It is attached to the rod. When moving, the bells collide with each other and begin to ring. The simplicity and reliability of the device is guaranteed by a renowned manufacturer.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Hoxwell Swingers

It is a spring in a plastic tube. The line along the rod is passed through both rings attached to the edges. On one side there is a luminous element and a weight. When biting, the movement of the signaling device is visible.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Mikado Swinger AIX-8490

Before use, the signaling device is fixed in such a way that it deflects the line from the vertical position. As soon as the fish bites, the line will straighten and the device will take a position parallel to the line.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Swinger Kosadaka FL-1139

The device rejects the line in idle state. After the fish has grabbed the bait, a brightly colored signal cylinder moves upward, signaling the fisherman to sweep.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Nash bobbin kit

The construction consists of a striking acrylic body, a small chain (8 cm) and an attachment. There is a double line clip: one is thrown off after a sharp jerk of the fish, the other lasts longer. As soon as a bite occurs, a sharp movement of the acrylic cylinder occurs.

Matrix Innovations Aero-Hangers

The indicator ring is attached to the rod. A bright cylinder, which is suspended on a cord, is attached to the fishing line with clamps. As soon as the fish grabs the hook, the fisherman will immediately notice its movement. This model is characterized by a high level of sensitivity.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

SALMO bells bunch – simple and effective fishing alarms

They are bells that will beep when the line moves. They hang on springs on either side of the rod. When shaken, the fisherman will know that a bite has occurred.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Bell Sleeve SWD

Differs in simplicity of the device and low cost. It is a bell in a cylindrical body. It is attached to the rod with a clamp. An audible signal sounds in the event of a shock.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemade

Homemade signaling devices – video instructions and tips

Consider the most interesting models of signaling devices that you can make at home with your own hands. Mechanical bite alarms, which can be done easily and simply with your own hands: https://youtu.be/qeW-YBJRYtE An interesting bite indicator for tackle the
killer of crucian carp and donkey: https://youtu.be/alts2-fBINE How to make a bite alarm – subtleties of manufacturing: https://youtu.be/_VwUsev2eN4 Unique DIY bite alarm that can be used for a bottom fishing rod, feeder and float; emits a sound and light signal, plus reacts with a mechanical wave: https://youtu.be/8nznA_4AeO8 The best and most convenient bite alarm for feeder and donkey: https://youtu.be/MwAgCM_uyFs

Bite alarm for feeder

At night, when fishing with feeder tackle, it is convenient to use the “firefly”. It is installed at the end of the feeder. Glow occurs on the basis of a chemical reaction that lasts for 12 hours. Usually the alarm consists of a tube with two compartments. After the destruction of the septum, the components mix and a chemical reaction begins, providing a glow. The pendulum indicator is a long metal spring in a bright plastic tube. There are strong metal loops on both sides, with which the device is attached to the line. A weight and a luminous element are placed at one end. The quivertip is a striking tip for a feeder blank. When biting, it bends down. By his movements, one can judge the behavior of the fish.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeBright tip for feeder blank [/ caption]

Bite alarm for bottom fishing rod

Even the simplest mechanical signaling devices, discussed above, will be effective when gripping with donks. In calm weather, it will be convenient to use the bells. And in windy weather, fireflies will become more effective.

Bite indicators with pager

Using a pager allows you to remotely receive a bite signal. Such a signaling device consists of two devices. One of them is attached to the rod and is designed to determine the bite. Second, it receives a remote signal. At this time, the fisherman may not follow the fishing rod, but do other things: cook fish soup, walk for firewood, prepare tackle. Pagers can receive signals by wire or radio. In the first case, the range will be limited, in the second – for some models it reaches two hundred meters. The alarm needs to be adjusted so that it can distinguish a real bite. A fisherman, having received a signal through a pager, can quickly move along the shore and make a hooking.
The best bite alarms for a feeder, donkey, fishing rods: purchased and homemadeSignaling devices [/ caption]

Bite alarm for float tackle

For this purpose, nods, pendulum devices or fireflies can be used. When fishing with a float rod, the fisherman clearly sees the attention of the fish to the bait. Indicators help you not to miss a single bite.

Ice Fishing Rod Indicators

When fishing under ice in difficult weather conditions, it is difficult for the fisherman to control the behavior of the fish. Often he casts his rods in several holes. Trying to fish a significant area. In this case, clearly visible or audible bite alarms are important. It is especially convenient to use electronic devices here. As well as mechanical ones, which, when biting, give a signal with a flag, as on a girdle, or emit a sound signal.

Поделиться ссылкой:

Rate author
Add a comment