What is the flat method, how to make editing and how to apply it in practice

The flat method (flet-fider-metod) is a popular method for catching fish in stagnant bodies of water and rivers with little flow, it is part of the
method of feeder fishing , often used
for carp fishing . Such equipment allows you to catch not only small
crucian carp , but also trophy specimens of carp. Below you can get acquainted with the peculiarity of the method and fishing tactics. The
feeder used in the flat method when fishing for carp on the feeder – allows you to make a long cast, which is important in summer and early spring in the heat and heat [/ caption]

Flat method: what is it, what is the peculiarity of this branch of the feeder

Flat is called a flat bottom method feeder. A hook with a leash is attached to the structure, the length of which reaches 7-10 cm. The bait, if desired, is hidden in the feeder along with the bait mixture. Due to the peculiarities of the structure of the open
feeder , flat works well in stagnant reservoirs. The flat sole of the structure does not sink into the silt.
Flat-method feeder [/ caption] The main advantages of flat are:

• the ability to effectively fish areas of a reservoir with a silted / algae-covered bottom;
• the correct location of the feeder in the water column;
• ensuring correct and accurate feeding of the bait mixture to the perspective point;
• the location of the hook with a nozzle on a clean area even after the bait is washed out (the risk of snagging is reduced);
• self-undercutting of fish;
• no risk of leash tangling.

Rapid washing out of complementary foods in water bodies with strong currents complicates the fishing process. This is considered the only drawback of the flat method.

Note! The type of feeder must be selected depending on the fishing conditions.

Homemade flat method feeders [/ caption]

When is flat used and in what conditions

Fishermen actively use flat when fishing stagnant silted reservoirs and rivers with weak currents, lakes and ponds. The versatile method has been developed for catching carp that suck in complementary foods from the bottom. Despite this, flat bream , tench,
grass carp and roach are successfully caught
. Fishing in low-flowing reservoirs is considered to be especially effective.

What is needed for flatt

For flat fishing, fishermen use
feeder rods . The length and test of the tackle are selected depending on the characteristics of the fishing. When choosing a rod, you should pay attention to the casting distance. For fishing the coastal zone, it is worth purchasing medium feeders / pickers, the length of which reaches 3.6 meters (test up to 60 g). When casting at distances up to 60 meters, 3.9 meter blanks with a test of up to 90 grams are suitable. For casts over long distances, it is advisable to buy an extra heavy feeder with a length of 3.9 – 5 meters (test over 80 g). If you plan to catch large fish, you should give preference to slower feeders. In other cases, you can use medium / fast action rods.
Among the best feeders that are suitable for flat fishing are:

• Stout Feeder – the length of the tackle suitable for fishing small crucian carp / bream is 2.7 m;
• Angler Heavy Feeder , designed for angling large fish;
• Jester Feeder – Universal Feeder
• The Avenger is a sport fishing rod.

After the tackle is selected, it is worth thinking about the question – what
type of feeder to choose. The designs of flat feeders are similar. They usually consist of a flat, heavy base and a frame plastic / solid metal top for filling with groundbait. The type of feeder is selected depending on the fishing conditions:

• to perform long-distance casts, it is worth using feeders, the mass of which is 2/3 of the upper test of the tackle;
• when fishing a reservoir with a silted bottom, it is necessary to give preference to flat structures, the center of gravity of which is not shifted;
• fishing in coastal areas will require lightweight feeders.

Advice! Before proceeding with the choice of a feeder, it is worth deciding in advance on the type of nozzle. The distance between the ribs of the structure is different, so it is important to choose a model in which a specific nozzle can be placed.

When fishing for areas of a reservoir with a small current, and when casting over long distances, it is better to use not a fishing line, but a braid, the diameter of which is 0.12-0.14 mm. At the same time, a shock leader is added to the rig
. For catching trophy fish it is worth using a monofilament with a diameter of 0.22 – 0.30 mm. Among the best models of monofilament fishing line for flat rigging, it is worth highlighting:

• Colmic method feeder;
• Browning Feeda Line Cenex;
• Sensas Feeder Tech Competition.

The best braids suitable for flat fishing are: Daiwa Tournament, Powersink Braid X4 PE, Sunline Siglon PE X4, Daiwa J-Braid X4.
The coil for the flat feeder must be powerful enough. Depending on the thickness of the cord and the characteristics of the tackle, the size of the spool is selected. Going fishing for crucian carp, you can install a reel in size 2500. If you plan to catch more serious prey, you should give preference to reels marked 4000. The best quality models are:

• Feeder Concept Pilot;
• Daiwa Regal 4000 XIA;
• Kaida Dragon FA 3000;
• Preston PC-R 6000;
• Banax Helicon 500NF;
• Teben AQR-400;
• Kaida MJ 5000A;
• Flagman Force Active Feeder.

To cushion strong jerks of fish and prevent the risk of breaking the leash, it is worth using a feedergam. It must be installed between the main rig and the leash. Experienced fishermen recommend choosing Feeder gum or Power gum rubber thread. The length of the feedergam is selected depending on the type of equipment. For flat mounting use small hooks of sizes 2, 4, 6. Korda Mixa, Korda Krank, Gardner Mugga are the best.
Hooks numbering [/ caption]

Flat mounting options

Below you can find a step-by-step implementation of the most
popular types of installation .

Blind installation of a flat method feeder on a feeder

To perform this type of installation, you will need to select a swivel for the diameter of the feeder tube. The swivel must fit snugly into the structure. Additional use of the connector will allow you to achieve a strong connection. The connector is pulled from above onto the swivel and threaded into the tube of the feeder. Blind rig and flat feeder fishing: https://youtu.be/FfIYFZ5IjQo Step-by-step process of blind mounting

1. First of all, anglers make a loop at one end of the lead core , the length of which is 60-80 cm. The loop is formed from a segment 16-20 cm long.
2. The opposite tip of the lead core is passed through the body of the feeder.
3. A connector is threaded through the leadcore and a loop with a swivel is knitted at its end.
4. The connector is put on the swivel.
5. The feeder is brought to the swivel and pulled by the opposite edge of the lead core. The connector with the swivel should fit tightly into the feed tube of the feeder.
6. A leash is mounted to the swivel, the length of which reaches 10 cm.

Sliding mounting of a flat feeder

If the fish is passive, it is worth using the sliding installation of the flat feeder. To do this, on one side of the fishing line, make a loop through which the equipment will be connected to the main fishing line / cord. A feeder is passed through the fishing line and a bead is threaded to protect the knot from the feeder and prevent it from climbing onto the swivel.
Having tied the swivel , you should fasten the leash, the length of which reaches 35 cm. [Caption id = “attachment_4179” align = “aligncenter” width = “600”]
Example of flat method feeder equipment on a method feeder [/ caption]

How to fish flat, suitable bait and bait options

For flat fishing, you can use animal / vegetable baits. Experienced fishermen claim that a good bite is observed with a hook attachment:

• boilies ;
• corn ;
• peas ;
• worm ;
• maggots ;
• bloodworms .

The use of the flat method implies separate mixing of the
bait intended for the feeder and for feeding the promising section of the reservoir. Using a bait mixture for feeding allows you to attract the attention of the fish and keep it in the place of fishing. The fraction of the ingredients of the feed mixture must be large. Fishermen recommend adding boilies, corn and pellets to the feed
. The bait should be sticky. It is important that during casting it does not fly off the trough, withstanding a power swing, hitting the surface of the water and in the process of diving to the bottom. Starter feed can be done manually or with a
slingshot… The bait mixture can be purchased at fishing stores or you can make your own. Today the best brands of fish feed are Dunaev, Sensas, FFem.
Feeder bait in a feeder type method [/ caption]

Fishing tactics

Flat fishing allows anglers to use multiple tackle. One of the feeders can be thrown onto the previously lured section of the reservoir, and the second tackle can be used to find another point. You can try fishing in shallow water near reeds and casting long distances. If for 10-15 minutes there was not a single bite, you should change the point. To find a promising point, you should stick to the fan method. Each subsequent cast is performed to the left / right of the previous one. You can also change the casting distance. After waiting for the first bite, you should throw the bait in the same place. Striking when fishing with a flat feeder should be short but sweeping. If the next bite follows, you can safely proceed to fishing this zone. A promising point has been found.

Advice! Castings must be done at intervals of 15 minutes.

Method reel and bait pellet [/ caption]

How to catch crucian carp on a flat

To catch crucian carp using the flat method, it is worth using animal baits (worm, maggot, bloodworm), as well as corn, peas and pearl barley. Flavors should be added to the groundbait. During the warmer months, sweet supplements are great, and in early spring and autumn, it is better to give preference to the garlic aroma. In summer, it is worth fishing in areas of the reservoir near reeds, holes and depth drops. At the end of autumn, you need to look for silver at a depth and under the eyebrows. It is best to use 2 tackle. With the second rod, you can fish the pond in search of promising places, every 10 minutes re-throwing the tackle in different directions until the first bite.

How to catch carp on the flat method

A properly selected nozzle provokes the fish to bite. When fishing for carp, it is worth planting on a hook:

• floating boilies;
• pellets;
• worm;
• corn;
• sinking boilies ;
• foam balls.

In the warm season, pop-up baits work most effectively
. The best bait for carp fishing is Dynamite baits Browning, Sensas and Marcel VDE. When a promising fishing point is found, it is worth starting feeding with 4
feeding troughs . The first pair of feeders should be free of feed at the bottom, and the second pair in the water column. Thus, it will be possible to create a feed spot in which the feeders will be hidden.

How to catch bream

To attract the attention of the bream, it is worth adding a small amount of flavoring (chocolate, strawberry, hemp) to the groundbait. It is better to use a deaf rig, thanks to which the fish self-catching occurs. After casting to a promising point, it remains to wait for a bite. The frequency of reloading the tackle is every 20 minutes. If for 40-60 minutes there is not a single bite, it is worth changing the fished section of the reservoir.

Classic Flat Method Feeder – Expert Video, Fishing Tips:

https://youtu.be/kZ6K2p2fHLk

Tips and Secrets

Avid fishermen are happy to share with beginners the secrets of fishing using the flat method.

1. The consistency of flat bait should not be similar to plasticine.
2. If you plan to catch large fish, you should purchase a reel with a baitrunner .
3. It is recommended to use boilies with a diameter of 10-12 mm as bait.
4. The jogging should be performed only at the moment of a strong blow, which will bend the blank of the rod.

Fishing with the flat method is becoming more and more popular among anglers who do not like to feed a certain area of ​​the reservoir for hours and wait for a bite all day. The flat method allows you to quickly find a promising place and start fishing for it. In order for going to the pond to bring the desired result, and the cage is quickly filled with fish, it is worth properly equipping the feeder and listening to the advice of experienced fishermen regarding the tactics of fishing on flat.

Поделиться ссылкой: