How to tie two hooks on a fishing rod so as not to get confused

How to tie two hooks on a fishing rod so as not to get confused –
on a float,
on a bottom,
on one fishing line,
spaced equipment, installation
on a winter fishing rod. How to
tie two hooks on a float fishing rod for catching carp. For a rich and active bite, it is important to be able to fasten the hooks so that they do not get tangled after immersion in water. For different gear, different methods of fastening are used – this should be taken into account when fixing. Let’s figure out which are the most effective.

How to tie two hooks on a float tackle so that they do not get confused with each other

There are no difficulties in tying, but there are still some nuances. Therefore, it is important to balance the length of the fishing line connecting the first and second hooks.

Method one

The easiest option is to tie a ”
eight ” and attach the tackle so that it moves away from the main fishing line.

Note! With this method of fixation, the divergence of the hooks in the water is extremely small if a mistake is made in the garter of the leash knot. It is very important that the position of the fishing line is perpendicular, as in the photo.

Method two

Removable option – use of fixing cambric. Allows you to remove additional tackle at any time and fish with one. Allows you to spread the hooks in different directions and does not allow them to tangle. A piece of thermotube should be placed above the swivel, with the possibility of movement. The fishing line with the second gear is attached through it:

Method three

Fast and secure fixation – with a loop and repeated wrapping and tightening of the free edge. It allows the mount not only to tightly fasten the fishing line with tackle, but also to prevent it from getting confused with the main one, since the whole structure is tilted.
Useful information: see a detailed guide on knitting fishing knots here: https://youtu.be/V9oZ-6Um9Es

How to make a double hook – how to attach hooks to bottom tackle

The peculiarity of this fastening is to spread the equipment on different sides so that they do not touch each other at all.

The median knot will need to be moistened to reduce friction.

Spaced mount

It has several subspecies and includes those hook tying techniques that involve either breeding between two parts, or an additional item that will increase the distance between the gears. This technique allows you to make a side tap.

Important! Do not make the ends the same length, as this is fraught with tangling of the fishing line!

The most optimal and common option is a rocker. It is done quite simply. Each hook is tightly tied with fishing line for reliability, the knot with the loop is located in the center:
The whole structure is attached to the bottom tackle (you can focus on the type of purchased model of this kind):
Tip: prepare the tackle in advance. At the place of future fishing, it is very inconvenient to do such complex manipulations. Video tutorials with a rocker: https://youtu.be/YmcCZPY7lbE And with a feeder: https://youtu.be/S2kZprle1VA

Other Mounting Methods

Quite often, fastening with limiter weights (or without them) is used with hooks in series. The principle of operation is the same as when attaching to a float, but the fishing line will be longer.

Attention! It is extremely important to make sure that the thickness and size of each segment is balanced. It is better not to take fishing lines of different types. Symmetry in such a design is unacceptable.

The most popular bottom rigs look like this:
They tie very quickly and rarely get confused.

Single line attachment

One of the simplest and easiest tricks is sequential fastening without the use of additional elements. It is enough to use the “eight” and place the hooks at different distances from each other.

Important! This option requires a very strong fixation. The tackle will not be mobile – consider this when choosing a bait. It is recommended to use an elastic fishing line.

The cons are quite obvious:

• it is inconvenient to take a catch;
• high probability of hooks;
• injury risk.

The advantages include:

• a large number of equipment;
• tying speed (Palomar or bloody knots).

Masters suggest avoiding this method, although it is it that minimizes the risk of tangling. Here is a knotless method used when fishing for carp: https://youtu.be/rWsM9LCcATc

The nuances of attaching two hooks on a winter fishing rod

Thicker line and stronger knots are the key to good fishing in the cold season. A minimum of three turns on the loop, an additional “eight” and another strong feint at the end – the risk of falling off is minimal.
The most optimal fastening is the location on two fishing lines of different lengths. The most important thing is to keep the perpendicular, which will not allow the tackle to get confused with each other. These options are advised by fishermen: https://youtu.be/h1CsfWfioTU

Advice for newbies! You can use the usual double hooks. Just for fixing, you should use a denser and thicker fishing line to reduce the risk of breaking due to temperature differences.

Is it worth it to knit two hooks for catching carp

Increasing the number of catches is the desire of every fisherman, so you can try common methods of catching carp on float rods. Can be used:

1. The method is with one line and several hooks, but it will be difficult to provide the right distance between the hooks – there is a high risk of catching other fish.
2. Classic trick with a knot and eyelets. There can be both removable fasteners without additional thermotubes, and with them.
3. With additional fixation of the hook with a bloody knot.

Important! Remember to use weights when mounting.

The best ways and personal experience of catching carp with a bait with two hooks can be found here: https://youtu.be/1sBTIjR87xk or cambric. Each angler chooses a convenient way for himself, but the optimal ones are those in which everything is asymmetric (this reduces the risk of tangling).

Поделиться ссылкой: